Titanium Plate

  • Home
  • Titanium Plate

 

1/2mm Perforated Titanium Sheet and Strips supplier in india, check Titanium Plate Price Per Kg

Titanium Plate
Titanium Plate
Titanium Metal Strip
Titanium Metal Strip
Pure Titanium Sheet
Pure Titanium Sheet

 

titanium plate suppliers, pure Titanium Alloy Coil and Foil, rib plate available for online order, buy Ti Shim Sheet at dealer price in Mumbai

 

Pure Titanium Plate is a silver-colored lustrous transition metal. The two most valuable properties of the 3mm Titanium Sheet are its corrosion resistance and its strength to density ratio, which is the highest seen in any metallic material. While pure titanium has high strength, 2mm Titanium Sheet loses strength when heated above 430 degrees Celsius. Precautions must be taken before machining the Titanium Metal Plate. This is due to the fact that the substance used in Titanium Sheet Stock will fall if measures such as sharp equipment and adequate cooling procedures are not used.

Titanium plate is an unalloyed, low strength titanium metal of high formability and low oxygen content. Titanium plate has numerous applications such as in the aerospace industry, laptop computers, architecture and art, industrial, and armour. Titanium sheet price in India is approximately INR 1300 per kg.

Titanium sheets may be waterjet cut or stamped to precise sizes in most applications, allowing for high-volume manufacturing of finished parts. Since this substance is heat resistant, it must be cut cold to avoid chemical product changes. Titanium metal sheets are used in a variety of industries. Titanium metal sheets are versatile and quickly adjustable, since they can be cut and stamped to create specific parts, as well as bent and moulded by heat treatment. We are one of the leading Titanium plate suppliers as well as  titanium sheet, tube, pipe, bar, and various fittings.

 

Table Of Content

 

 

Specification table of Titanium Alloy Plate
Standard ASTM B265, ASME SB265, AMS 4900, AMS 4901, AMS 4902
Material Pure Titanium plate and titanium alloy
Type Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
ASTM B265 Titanium Alloy Plate Length 0-12mm or as required
Titanium Plate Width 0-2500mm or as required
ASTM B265 Titanium Alloy Plate Thickness 0.3 to 1200 mm or as required
CP Titanium Plate Process Hot/ Cold Rolled
Titanium Plate surface No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.

 

Titanium Sheet, Plate & Coil

Sizes: Sheet & Plate

.012 TO 4.00 X r/w X R/L

Sizes: Coil

.001 to .011 x R/W x R/L

 GRADE SPECIFICATIONS
6AL-4V, 6AL-4V ELI AMS-4911, 4907,4905, MIL-T-9046, ASTM-F136
DMS-1592, GM-3103,12TM-B265
6AL-2SN-4ZR-2MO AMS,4919, MIL-T-9046, DMS-2275, AMS-T-9046
GM-3104, B50TF21
6AL-6V-2SN AMS-4918, MIL-T-9046, DMS-1879, AMS-T-9046
5AL-2.55N, 5-2.5 ELI AMS-4909, 4910, MIL-T-9046, AMS-T-9046
BAL-IMO-1V AMS-4915, 4916, DMS-1784
CP-GRADES 1,2,3,4 AMS-4900, 4902
MIL-T-9046, AMS-T-9046, DMS-1536, ASTM-B265
15V-3CR-3SN-3AL AMS-4914

 

Other Titanium Plate Information for buyers

Titanium Alloy Plate, Sheet and Strip Pure Titanium plate and titanium alloy
Tolerances of width and thickness
  • EN 10258 (formerly DIN 59381)
  • EN 10151 ASTM B265 Pure Titanium strip for springs
  • EN 10088 ASTM B265 Pure Titanium strip (general)
CP Titanium Plate standards and approvals
  • EN ISO 18286
  • EN 10051
  • EN 10088-1
  • ISO 15510
  • EN ISO 9445
  • ASTM A 480
  • ASTM A 959
  • ASME IID
Standard Titanium Metal Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Cold rolled Ti Alloy Plate 0.5-6.4 mm
  • Hot rolled Ti Alloy Plate 3.0–10.0 mm
Titanium Plate Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Pure Titanium Sheet suppliers
Availability of CP Titanium Foil sizes Thickness : 8-100 microns (0.00031-0.004 in)
Width: Up to 500 mm (19.5 in)
Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Plasma profiles As per customer's drawings
Value added services for Titanium Sheet Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.
Ti Alloy Plate Manufacturer in india
  • ASTM B265 Titanium Alloy Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • Ti Alloy Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • SB 265 Titanium Clad plate: SB 265 Titanium Clad plate is a composite steel plate made by bonding CP Titanium Titanium Plate, etc.
  • ASTM B265 Pure Titanium Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
CP Titanium Plate Origin Indian Origin, European Origin, Japanese Origin
Packing of Titanium Alloy Plate Bundles with waterproof cloth outside or plywood box
services for Pure Titanium Coil
  • Cut-to-length
  • Slitting
  • Polishing
  • Blanking
Test UT, SGS testing, TUV etc
Titanium Sheet dealers & distributors are located in Abu Dhabi, Gimhae-si, New Delhi, Pimpri-Chinchwad, Port-of-Spain, Kolkata, Sydney, Thiruvananthapuram, Caracas, Montreal, Dammam, Tau, Gujarat, Ludhiana, Chennai, Noida, Rajkot, Ahmedabad, Melbourne, Ankara, Janeiro, Nagpur,Indore, Kuwait, Courbevoie, Ernakulam, Kanpur, Istanbul, Ahvaz, Surat, India, Bengaluru, Jamshedpur, London, Khobar, Howrah, Bogota, Mumbai, Muscat, Perth, Riyadh, Karachi, Santiago, Tehran, Baroda, Coimbatore, Ranchi, Mexico Hyderabad, Manama, Calgary, Bangalore, Lagos, Gurgaon, Ludhiana, Vadodara,
Why buy Titanium Sheet
from Jignesh Steel ?
  • Free quote
  • Free sample
  • EN 10204 3.1
  • Mill Test Certificate is supplied with shipment.
  • NABL Approved Lab Reports
  • Any third party inspection is accepted.
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Minimum Nitrogen content and Ferrite Count Test

 

Titanium Plate Price

Special offer on the following sizes - Price List 2022

Titanium Plate Thickness Quantity Price List
0.4 x 250 x 250 1 US $ 73.23
0.4 x 250 x 250 2 US $ 109.30
0.4 x 250 x 250 3 US $ 144.28
0.4 x 250 x 250 4 US $ 173.79
0.4 x 250 x 250 5 US $ 188.00
0.4 x 500 x 500 1 US $ 155.21
0.4 x 500 x 500 2 US $ 265.61
0.4 x 500 x 500 3 US $ 353.05
0.4 x 1000 x 1000 1 US $ 427.37
0.4 x 1000 x 2000 1 US $ 839.44
Titanium Sheet Thickness Quantity Price List
0.5 x 250 x 250 1 US $ 79.79
0.5 x 250 x 250 2 US $ 122.42
0.5 x 250 x 250 3 US $ 153.02
0.5 x 250 x 250 4 US $ 195.65
0.5 x 250 x 250 5 US $ 210.95
0.5 x 500 x 500 1 US $ 174.88
0.5 x 500 x 500 2 US $ 300.58
0.5 x 500 x 500 3 US $ 407.70
0.5 x 1000 x 1000 1 US $ 500.61
0.5 x 1000 x 2000 1 US $ 946.56

 

Description Titanium Plate Price in India
F316 Medical Titanium Sheet for Vacuum Coating Sputter/Sputtering Target/ US $ 20 / kg
ASTM B265 ASME Sb265 Pure Titanium Plate Titanium Sheet US $ 15.0-30.0 / kg
Cp Titanium Alloy Plate Titanium Sheet US $ 18-38 / kg
Titanium Alloy Plate ASTM B265 US $ 15-50 / KG
ASTM Gr4 Titanium Plate US $ 18-22 / kg
ASTM F136 Eli Titanium Alloy Plate for Medical Implants US $ 15.5-35.8 / kg
Titanium Clad Tubesheet/Tube Plate (E004)  US $ 800-1000 / Piece
ASTM B265 Titanium Plate / Sheet Titanium US $ 20-40 / kg
Customized Foam Titanium Sintered Porous Plate US $ 1.5-3 / Piece

If it's not too much trouble, note This is an estimated Cost of Thin Titanium Sheet in India. For best Price purchase directly from Titanium Plate Supplier In India, check latest ASTM B265 Titanium Alloy Plate price list & stock sizes if it's not too much trouble, mail us.

 

What is Titanium Plate?

Titanium Sheet is also known as Ti Titanium Perforated Sheet and has the chemical symbol Ti. Titanium layer has a high corrosion tolerance, making it an inert biomaterial, i.e. - Titanium plate would not alter after being inserted in the body.

 

Titanium Plate Types
ASTM B265 Pure Titanium Perforated Sheet
ASTM B265 Pure Titanium Perforated Sheet
SB 265 Titanium Shim Stock
SB 265 Titanium Shim Stock
Titanium Metal Clad Plate
Titanium Metal Clad Plate
ASTM B265 Titanium Cold Rolled Sheet
ASTM B265 Titanium Cold Rolled Sheet
ASTM B265 Pure Titanium Strip
ASTM B265 Pure Titanium Strip
Ti Alloy Shim Sheet
Ti Alloy Shim Sheet
SB 265 Titanium Strip Tape
SB 265 Titanium Strip Tape
CP Titanium Chequered Plate
CP Titanium Chequered Plate
Titanium Alloy Superalloy Mesh Plate
Titanium Alloy Superalloy Mesh Plate
Pure Titanium Checker Plate
Pure Titanium Checker Plate
Titanium Hot Rolled Plate
Titanium Hot Rolled Plate
Pure Titanium Cold Rolled Plate
Pure Titanium Cold Rolled Plate
Ams 4901 Titanium Sheet
Ams 4901 Titanium Sheet
Ti Alloy Plate
Ti Alloy Plate
SB 265 Titanium Coil
SB 265 Titanium Coil
CP Titanium Foil
CP Titanium Foil

 

melting range of ASTM B265 Titanium Alloy Plate
CP Titanium Plate melting range
3135°F
1725°C

 

CP Titanium density of Titanium Plate

ASTM B265 Titanium Alloy Plate density
0.1630 lb/in³
4.512 g/cm³

 

Titanium Plate Sizes
Titanium Sheet/Plate Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.600"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

ASTM B265 Pure Titanium Sheet, Plate & Foil Difference
  • Thickness less than 0.15mm is called a Titanium Foil.
  • Thickness greater than 6.35 mm is called a Titanium Plate.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Titanium Sheet.

 

Titanium Plate Thickness
Thickness Titanium Sheet Grades
.016 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.020 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.025 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.032 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.040 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.050 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.063 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.071 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.080 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.090 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.100 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN
.125 CP1, A70, 75A, CP3, A40, 55A, 6AL-4V ANN

 

thickness tolerance chart of Ti Alloy Plate

 

Tolerances on thickness of steel plates

                                              Tolerance over and under nominal thickness t (mm)
Width w (mm) 2.5<t <4.5 4.5<t <6.0 6.0<t <8.0 8.0<t <10.0 10.0<t <12.5 12.5<t <16.0 16.0<t <20.0  20.0<t <25.0 25.0<t <30.0 30<t <40.0
w < 1200 0.20  0.23 0.30 0.32 0.35 0.80 0.80 0.80 1.0 1.4
1200< w <1500 0.20 0.25 0.30 0.35 0.38 0.80 0.80 0.90 1.0 1.4
1500< w <1800 0.20 0.28 0.32 0.38 0.40 0.80 0.80 0.90 1.1 1.5
1800< w <2100 0.20     0.30      0.36     0.40     0.45      0.80      0.80      0.90      1.1         1.5        
2100< w <2400   0.80 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.5
2400< w <2700   0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.3 1.7
2700< w <3000   0.80 0.90 1.0 1.0 1.0 1.1 1.3 1.4 1.8

 

Tolerances on length of plates
                                                                                                     Tolerance(mm)                                 
Nominal length (mm)                                         Minus Plus
L < 2,000 0                                                   10                                                     
2,000 < L < 8,000 0 0.005 times L
L > 8,000 0 40

  

Tolerances on width of plates
                                                                                                 Tolerance (mm)
  Trimmed edge                                                Mill edge                                              
Nominal width (mm) Minus Plus Minus Plus
w < 1200 0 3 0 20
1200 < w < 1500 0 5 0 20
w > 1500 0 5 0 20

 

Weight per Unit of Pure Titanium Plate
Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Buy Thin Titanium Mesh Sheet and Pay only for the sizes you buy of Titanium Metal Cold Rolled and Hot Rolled Plate

 

LDon't Forget to check our material supplied to Qatar, Malaysia and other countries in Europe and America
Indonesia, philippines, Dammam -KSA, Belgium 8K/Hairline/No. 4 Surface Elevator Decorative Titanium Plate
France, Europe, Qatar, Thailand Permanent Titanium Cathode Plates/ Ss Permanent Cathode Plate for Electrowinning/
Germany,  Thailand, Czechia, Malaysia Titanium Clad Tube Plate Machind and Drilled (E011)
 USA, Bangladesh, Malaysia, Finland Sea Water Desalination Removable Plate for Titanium Plate Heat Exchanger
Saudi Arabia (KSA), Kuwait, South Africa, Brazil Explosion Bonding/ Metallurgical Bond Ti Copper Clad Plate/ Titanium Clad Copper Sheet for Surface Treatment
South Africa, Singapore, Bahrain Titanium Sheet Titanium Plate Platinum Plated Anode Titanium Plate with Laser Cutting
Australia, UK, Philippines, Nigeria Titanium Alloy Plates and Sheets
Malaysia, Hong Kong, Oman, UAE Titanium Coated PVD Stainless Steel Colored Decorative Sheet and Plate
Italy, Iran, Chile, Singapore ASTM B265 Grade 12 Alloyed Titanium Plate
Turkey,  Norway, United Arab Emirates (UAE), Malaysia B265 /A516 Gr 70 Titanium/Steel Clad Plate (Explosion Bonded)
Malaysia, Russia, Netherlands, Dubai Titanium Clad Carbon Steel Two Metals Plate with Explosion Welding
Spain, Mexico, Egypt, UK Titanium Sheet Titanium Plate for Stamping

 

Dimensions chart of Titanium Plate

ASTM B265 Titanium Alloy Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

 

Titanium Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

Comparision Between Inconel and Titanium

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Composition of Inconel

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Titanium

Titanium metal might be a particularly strong metal for designing applications since this metal is corrosion-resistant furthermore this metal is incredibly strong and especially light. It is 40% lighter than steel however as strong as high-strength steel.

Titanium Compositions (percentages)

Grade C N O H Ti Fe
Titanium Gr 1 .08 max .03 max .18 max .015 max bal .20 max
Titanium Gr 4 .08 max .05 max .40 max .015 max bal .50 max
Titanium Gr 7 .08 max .03 max .25 max .015 max bal .30 max
Titanium Gr 9 .08 max .03 max .15 max .015 max - .25 max
Titanium Gr 12 .08 max .03 max .25 max 0.15 max - .30 max


Ready Stock of Titanium Alloy Plate
Types of Titanium Plate we stock:
ASTM B265 Ti ASTM B265 Chequered Plate Ti Quarto Plate
Ti Hot Rolled Plate ASTM B265 Ti Perforated Plate
Ti Alloy Cold Rolled Plate Ti Bbq Plate
Ti Alloy Plate Ti Rolling Plate
Ti Embossed Plate Ti Alloy Plasma Cutting Plate
Ti Custom Cut Plate Ti Sheet
Ti Plate Mill Finish Ti Thin Plate
Ti Alloy Checker Plate Ti Polished Plate
ASTM B265 Ti Plate 2b Finish Ti Diamond Plate
Pure Ti Superalloy 1/4 Inch Plate Ti Perforated Sheet
Ti Checkered Plate ASTM B265 Ti Laser Cut Plate
Ti Clad Plate Ti Alloy Tisco Plate
Ti Plate Brushed Finish Pure Ti Superalloy Hot Rolled Sheet
Ti Grade 10mm Plate Ti Alloy Cold Rolled Sheet
Ti Chequer Plate Ti Tread Plate
Ti alloy Plate Mirror Finish Ti Grade Chequered Plate

 

uses of CP Titanium plate
  • Architecture and Art
  • Laptop Computers
  • Aerospace Industry
  • Armor
  • Industrial

 

Features of ASTM B265 Titanium Plate
  • Very high strength
  • High strength at cryogenic temperatures
  • Good weldability
  • Good corrosion resistance
  • Excellent strength to weight ratio

 

hs code of ASTM B265 Titanium Plate
HS Code Description
76169990 50082854-003 FRONT PLATE ASSY 2G4M-MST FRONT PLATE ASSY 2G4M-METALLICS SATIN TITANIUM (MST) (ELECTRIC COMPONENTS FOR CAP
81089090 TITANIUM PLATE PT 38 - 4 X 1200 X 2000MM (2 PCS)
81089090 TITANIUM PLATE GR1 ASTM B265 SIZE 2.0 X 1220 X 2440 MM - QTY10 PCS
94036000 WINE CART (8129# WOOD STAINLESS STEEL PLATE TITANIUM)
81089090 TITANIUM PLATE GR1 ASTM B265 SIZE 2.0 X 1000 X 2000 MM - QTY4 PCS
81089090 TITANIUM PLATE GR1 ASTM B265 SIZE 4.0 X 1000 X 2000 MM - QTY2 PCS
81089090 TITANIUM PLATE GR1 ASTM B265 SIZE 3.0 X 1000 X 2000 MM QTY-2 PCS
81089090 TITANIUM PLATE GR1 ASTM B265 SIZE 6.0 X 1000 X 2000 MM - QTY1 PCS
81089090 TITANIUM PLATE GR1 ASTM B265 SIZE 2.5 X 1000 X 2000 MM - QTY1 PCS

 

Properties of Titanium Alloy Plate

Titanium Plate Chemical Composition

Titanium Grade 

 1 2 3 4 5 7 9 12

C Max

 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08

O Max

 0.18 0.25 0.35 0.40 0.20 0.25 0.15 0.25

N Max

 0.03 0.03 0.05 0.05 0.05 0.03 0.03 0.03

H Max

 0.015 0.015 0.015 0.015 0.015 0.015 0.015

0.015

Iron Max

 0.20 0.30 0.30 0.50 0.40 0.30 0.25 0.30

Al

 ... ... ... ... 5.5~6.75 ... 2.5~3.5 ...

V

 ... ... ... ... 3.5~4.5 ... 2.0~3.0 ...

Mo

 ... ... ... ... ... ... ... 0.6~0.9

Ni

 ... ... ... ... ... ... ... 0.2~0.4

Pd

 ... ... ... ... ... 0.12~0.25 ... ...

Other Max

 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1

Total

Max

 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4

 

CP Titanium Plate Mechanical Properties
Grade Tensisle Strength Yield Strength

Elogation in 2 in. or 50mm min.,%

 Bend Test
Min Min Min Min Max Max

Under 0.070 in. (1.8mm) Thickness

0.070 to 0.187 in. (1.8mm to 4.75mm) Thickness
Ksi Mpa Ksi Mpa Ksi Mpa
1 35 240 20 138  45 310   24  1.5T 2T 
2 50 345 40 275  65 450  20   2T 2.5T 
3 65 450 55 380  80 550  18   2T 2.5T 
4 80 550 70 483  95 655  15   2.5T 3T 
5 130 895 120  828 ... ...  10  4.5T 5T 
7 50 345 40 275  65 450   20  2T 2.5T 
9 90 620 70 483  ...  ...   15  2.5T 3T 
12 70 483 50  345  ... ...   18  2T 2.5T 

 

titanium Sheet/plate for sale, We Keep Bulk Stock of Ams 4901 Titanium Clad Plate at our stockyard, contact us for Free Sample & stock list
AMS Properties
4900L Sheet, Strip and Plate, C.P., Annealed, 55.0 ksi (379 MPa) Yield Strength
4901M Sheet, Strip, and Plate, C.P. Annealed, 70.0 ksi (485MPa)
4902G Sheet, Strip, and Plate, C.P. Annealed, 40.0 ksi (276 MPa) Yield Strength
4905B Damage-Tolerant Grade Plate 6AL – 4V, Beta, Annealed
4907F Sheet, Strip, and Plate 6AL-4V, Extra Low Interstitial Annealed
4908F Sheet and Strip, 8Mn, Annealed, 110,000 psi (760 MPa) Yield Strength
4909F Sheet, Strip, and Plate 5AL -2.5Sn, Extra Low Interstitial, Annealed
4910K Sheet, Strip and Plate 5AL – 2.5Sn Annealed
4911H Sheet, Strip, and Plate, 6AL – 4V, Annealed
4914A Cold Rolled Sheet and Strip, 15V - 3AL – 3Cr – 3Sn Solution Heat Treated
4915G Sheet, Strip, and Plate, 8AL – 1V – 1Mo, Single Annealed
4916F Sheet, Strip, and Plate, 8AL – 1Mo – 1V, Duplex Annealed
4917E Sheet, Strip, and Plate, 13.5V – 11Cr – 3.0AL, Solution Heat Treated
4918H Sheet, Strip, and Plate, 6AL – 6V- 2Sn Annealed
4919C Sheet, Strip, and Plate, 6AL– 2Sn – 4Zr – 2M0 – 0.08Si, Duplex Annealed

 

COMMERCIALLY PURE TITANIUM SHEET
GRADE BRITISH
STANDARD		 FRANCE GERMAN
AEROSPCE
GR.1 BS 2TA 1 T-35 3.7024
GR.2 BS 2TA 2 T-40 3.7034
GR.3 DTD5023 T-50 3.7054
GR.4 BS 2TA 6 T-60 3.7064

 

Equivalent of Titanium Plate
Titanium Sheet
Grade Specification
C.P.1, A70, 75A AMS-4901 / MIL-T 9046, TYPE 1 COMP. B / C.P.1, DMS 1536
C.P.3, A40, 55A AMS-4902 / MIL-T 9046, TYPE 1 COMP. A / C.P.3
6AL-4V ANN AMS-4911 / MIL-T 9046, TYPE 3 COMP.C / AB1, DMS 1592

 

Specification Equivalent Spec Equivalent Grade
British Standard Rolls Royce USA France Germany General Engineering
TA11 MSRR8652 AMS4928 AIR 9183 TA6V 3.7164-2 6AL-4V
TA12 MSRR8614 AMS4935 6AL-4V
MIL-T-9047 6AL-4V

 

2B/ BA/ HL/ NO.1 finish Cut to size grade .125 / .012/ 3mm Titanium Sheet available at lowest price in Mumbai, view Titanium Sheet Price/Cost

 

 

Our Products

Titanium Plate/Sheet Cutting

  Laser Cutting
  Plasma Cutting
  Oxy-propane Flame
  Cutting
  Waterjet cutting
  Bending and mechanical
  processing
  edge preparation
  sawing and shearing
  welding

© Copyright Jignesh Steel 2021. All Rights Reserved. Design and SEO by Mesotek