Ti Alloy Seamless Pipe manufcaturer in india at low price according to Astm B337 Standard, get Weight Calculator
Titanium Pipe
Ti Alloy Welded Pipe
Titanium Seamless Pipe
titanium pipe suppliers, Have difficulty to find Asme Sb337 Welded Titanium Pipe in tough sizes ? Call Jignesh Steel now
Ti Alloy Welded Pipe is a solid, lightweight, and corrosion-resistant material. ASTM B337 and ASTM B338 are the requirements for titanium pipes. The tensile strength of a Titanium Welded Pipe is usually equal to the strengths present in most alloy steel categories. Titanium Pipe has a density that is just 56% that of steel. Although the corrosion resistance of ASME SB337 Welded Titanium Pipe is comparable to metal platinum. Titanium and Ti Alloy Seamless Pipe have tensile strengths ranging from around 30,000 psi to 200,000 psi.
Titanium EFW Pipe produces a very thin, conductive oxide surface film when exposed to air and surface oxygen. Since titanium pipe is half the weight of steel, it can be almost as solid (as steel) while being half the weight. This thin film that forms on the Titanium pipe is known as a passivated oxide coating, and it covers the ASTM B337 Titanium seamless pipe. Titanium Seamless Pipe is distinguished by a high strength-to-weight ratio. In an oxygen-free area, it is very ductile and has a low density. Furthermore, the coating present on the titanium alloy drill pipe has the benefit of providing a rough, smooth surface, which limits foreign material adhesions on the titanium alloy pipe. We are one of India's leading manufacturers, retailers of titanium pipe suppliers.
Table Of Content
| ASTM Specification | ASTM B337/ASME SB B337 , ASTM B861/ASME SB861 |
|---|---|
| Standard | JIS, TOCT, GB, AMS, EN, ASTM, AISI, SAE, ASME, DS, NF, DTD, DIN |
| ASTM B861 Titanium Welded Pipe Size | 5.0 - 1219.2 mm |
| Titanium Alloy Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| Titanium EFW Pipe size | 5.0 - 1219.2 mm |
| Ti Alloy Pipes Schedule | SCH5, SCH140, SCH80, XS, SCH10, SCH10S, SCH80, XXS, SCH120, SCH60, SCH30, STD, SCH20, SCH40S, SCH160, SCH40 |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Finish | BA (Bright & Annealed), Polished, AP (Annealed & Pickled), NO.1, MF, 2B, NO.4, HL, BA, Mirror finish, 8K etc |
| Length | Single Random, Standard & Cut length , Double Random Pipe |
| Form | Titanium Pipes are available in form of Square, Round, Rectangular, Hollow, Coiled, Hydraulic, Straight Pipes, Pan Cake Coils, “U” Shape etc. |
| End of Titanium Alloy Pipes | Beveled End, Plain End, Screwed ends, Treaded Pipe |
| Type of Ti Pipes | ERW/ Seamless / Welded / EFW / CDW / Fabricated /CEW/ DOM Titanium Pipe |
| Application of Titanium Pipes | Oil Pipes, Dairy Pipes, Boiler Pipes, Fluid Pipes, Gas Pipes for Chemical Industry |
| Marking on ASTM B337 Titanium Pipes | All ASTM B337 Titanium Pipess are marked as follows: Grade, Standard, Thickness, OD, Heat No. (Or according to the customer’s request.), Length |
| Specialize in | Large Diameter Titanium Pipes |
| Value Added Service | Polish (Electro & Commercial) Annealed & Pickled Bending, Draw & Expansion as per required Size & Length, Machining Etc. |
| manufacturing Technique of Titanium Alloy Pipes | hot drawn, Cold drawn, solid solution, bright annealed, hot extruding |
| Test Certificate of Titanium Astm B861 Pipes |
|
| Our stockyard of Titanium Pipe | Port-of-Spain, Pimpri-Chinchwad, Abu Dhabi, New Delhi, Gimhae-si, Hyderabad, Mexico, Bangalore, India, Howrah, Surat, Calgary, Thiruvananthapuram, Mumbai, Lagos, Ernakulam, Chennai, Sydney, Kuwait, Ankara, Coimbatore, Dammam, Santiago, Perth, London, Nagpur,Indore, Muscat, Bogota, Baroda, Kolkata, Karachi, Rajkot, Noida, Tau, Melbourne, Gurgaon, Ahmedabad, Caracas, Montreal, Vadodara, Bengaluru, Khobar, Kanpur, Ludhiana, Courbevoie, Gujarat, Ahvaz, Jamshedpur, Manama, Janeiro, Ranchi, Tehran, Istanbul, Riyadh |
| Manufacturers of ASME SB861 Titanium Pipe |
|
| Material Test Certificates (MTC) |
|
| Titanium Pipe Dimension ANSI/ ASME B36.10, B36.19, B2.1 We can also thread, cut and groove Titanium Astm B861 Pipe to meet your specifications. | |
Seamless or Welded Titanium pipe as Per ASTM B861
- ASTM B861 or B862 Grade 9 Titanium Pipe
- ASTM B861 or B862 Grade 2 Titanium Pipe
- ASTM B861 or B862 Grade 1 Titanium Pipe
- ASTM B861 or B862 Grade 12 Titanium Pipe
- ASTM B861 or B862 Grade 5 Titanium Pipe
| Types | Out diameter | Wall thickness | Length |
|---|---|---|---|
| NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
| Titanium Seamless Pipe (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
| Titanium Welded Pipe (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
The ASME SB861 Titanium Pipe standard covers 34 grades of smooth titanium and titanium alloy pipe. The titanium astm b861 pipe has been designed in accordance with this standard with the planned usage of general corrosion resistance as well as elevated temperature operation in mind.
| HS Code | Description |
|---|---|
| 98010013 | PIPES, FITTINGS, PACKING FOR TITANIUM-ALLOY PIPELINES (PARTS OF NUCLEAR REACTOR) |
| 81089090 | SEAMLESS TITANIUM PIPE, ASTM B861, ANNEALED OD 48XWT(AVG)0.6MMXRANDOM LENGTH 2-3MTR |
| 81089090 | SEAMLESS TITANIUM PIPE, ASTM B861 ANNEALED OD 48XWT(AVG)1.0MMXRANDOM LENGTH 2-3MTR |
| 81089090 | TITANIUM WELDED PIPES SECONDARY |
| 81089090 | TITANIUM SEAMLESS PIPE |
| 81089090 | TITANIUM SEAMLESS PIPE |
| 81089090 | TITANIUM WELDED PIPE ASTM B 862 , 8 X SCH 10, 7 MTR, 3 PCS |
| 81089090 | TITANIUM WELDED PIPE ASTM B 862 , 6 X SCH 10, 7 MTR, 3 PCS |
| 81089090 | TITANIUM ALLOY DEFECTIVE PIPES |
| 81089090 | TITANIUM ALLOY DEFECTIVE PIPES |
titanium exhaust pipe for sale, Supply Cut to length Astm B861 Titanium Alloy Drill Pipe in all sizes and diameter as per Client requirement
| Description | Price list of Titanium Pipe in India |
|---|---|
| ASTM B861 Round Seamless Titanium Pipe for Industrial | US $ 30-60 / kg |
| Seamless Titanium Pipe ASME Sb861, ASME Sb338 | US $ 15-20 / Meter |
| ASTM-B338 ASTM-B861 Titanium Pipes | US $ 35000 / Ton |
| ASTM B338 Industrial Titanium Pipe | US $ 15-50 / kg |
| ASTM B338 Seamless Titanium Pipe for Air Conditioning | US $ 147-220 / kg |
| Titanium Exhaust Straight Pipe | US $ 16.9-45.2 / kg |
| Titanium Pipe for The Aerospace Industry | US $ 16.5-23.9 / kg |
| Titanium Universal Motorcycle Exhaust Modified Muffler Pipe for Most Motorcycles | US $ 10-15 / Piece |
| Bending Price List Titanium Pipe | US $ 22-28 / kg |
If it's not too much trouble, note This is an estimated Cost of Titanium pipe in India. Kindly don't hesitate to get in touch with us for Free Quote and most recent Titanium Alloy pipe Price List in India. Additionally contrast our Price and other ASME SB337 Titanium Pipe suppliers in India & China.
Quality Material Titanium Pipe Stocking Distributor
| Titanium grade Pipe | Description |
|---|---|
| Pipe Ti Grade 1 (CP Ti) | Relatively low-strength and high-ductility pure titanium (Cp). |
| Pipe Ti Grade 2 (CP Ti) | Medium-strength pure titanium (Cp). |
| Pipe Ti Grade 3 (CP Ti) | High strength pure titanium (Cp). |
| Pipe Ti Grade 5 | |
| Pipe Ti Grade 7 | Medium-strength Pd-alloyed titanium for enhanced corrosion properties. |
| Pipe Ti Grade 9 | High-strength titanium alloyed with 3% Al and 2.5% V. |
| Pipe Ti Grade 11 | Low-strength titanium plus 0.12-0.25% Pd for enhanced corrosion properties. |
| Pipe Ti Grade 12 | High-strength titanium alloy plus 0.3% Mo and 0.8% Ni for enhanced corrosion properties. |
| Pipe Ti Grade 16 | Medium-strength titanium plus 0.04-0.08% Pd for enhanced corrosion properties. |
| Pipe Ti Grade 17 | Low-strength titanium plus 0.04-0.08% Pd for enhanced corrosion properties. |
| Pipe Ti Grade 26 | Medium-strength titanium plus 0.08-0.14% Ru for enhanced corrosion properties. |
| Pipe Ti Grade 28 | High-strength titanium alloy plus 3% Al, 2.5% V and 0.08%-0.14% Ru for enhanced corrosion properties. |
ASTM B861 Titanium Seamless Pipes are supplied according to ANSI/ ASME B36.19.
OD = Titanium Pipe outside diameter
WT = Titanium Pipe wall thickness
ASTM B337 Titanium Pipe OD mm |
Pipe WT mm |
in. |
Sch |
Kg/m |
|---|---|---|---|---|
13.72 |
1.65 |
1/4 |
10S |
0.50 |
13.72 |
2.24 |
1/4 |
40S |
0.64 |
13.72 |
3.02 |
1/4 |
80S |
0.81 |
17.15 |
1.65 |
3/8 |
10S |
0.64 |
17.15 |
2.31 |
3/8 |
40S |
0.86 |
17.15 |
3.20 |
3/8 |
80S |
1.12 |
21.34 |
2.11 |
1/2 |
10S |
1.02 |
21.34 |
2.77 |
1/2 |
40S |
1.29 |
21.34 |
3.73 |
1/2 |
80S |
1.65 |
26.67 |
2.11 |
3/4 |
10S |
1.30 |
26.67 |
2.87 |
3/4 |
40S |
1.71 |
26.67 |
3.91 |
3/4 |
80S |
2.23 |
33.40 |
2.77 |
1 |
10S |
2.13 |
33.40 |
3.38 |
1 |
40S |
2.54 |
33.40 |
4.55 |
1 |
80S |
3.29 |
33.40 |
6.352) |
1 |
160 |
4.30 |
42.16 |
2.77 |
1¼ |
10S |
2.73 |
42.16 |
3.56 |
1¼ |
40S |
3.44 |
42.16 |
4.85 |
1¼ |
80S |
4.53 |
42.16 |
6.352) |
1¼ |
160 |
5.69 |
48.26 |
2.77 |
1½ |
10S |
3.16 |
48.26 |
3.68 |
1½ |
40S |
4.11 |
48.26 |
5.08 |
1½ |
80S |
5.49 |
60.33 |
2.77 |
2 |
10S |
3.99 |
60.33 |
3.91 |
2 |
40S |
5.52 |
60.33 |
5.54 |
2 |
80S |
7.60 |
60.33 |
8.742) |
2 |
160 |
11.29 |
73.03 |
3.05 |
2½ |
10S |
5.35 |
73.03 |
5.16 |
2½ |
40S |
8.77 |
73.03 |
7.01 |
2½ |
80S |
11.59 |
88.90 |
3.05 |
3 |
10S |
6.56 |
88.90 |
5.49 |
3 |
40S |
11.47 |
88.90 |
7.62 |
3 |
80S |
15.51 |
88.90 |
11.132) |
3 |
160 |
21.67 |
101.60 |
3.05 |
3½ |
10S |
7.53 |
101.60 |
5.74 |
3½ |
40S |
13.78 |
101.60 |
8.08 |
3½ |
80S |
18.92 |
114.30 |
3.05 |
4 |
10S |
8.50 |
114.30 |
6.02 |
4 |
40S |
16.32 |
114.30 |
8.56 |
4 |
80S |
22.67 |
114.30 |
13.492) |
4 |
160 |
34.05 |
141.30 |
6.55 |
5 |
40S |
22.10 |
141.30 |
9.53 |
5 |
80S |
31.44 |
141.30 |
15.882) |
5 |
160 |
49.87 |
168.28 |
3.4 |
6 |
10S |
14.04 |
168.28 |
7.11 |
6 |
40S |
28.69 |
168.28 |
10.97 |
6 |
80S |
43.21 |
168.28 |
14.27 |
6 |
120 |
54.75 |
168.28 |
18.262) |
6 |
160 |
68.59 |
219.08 |
8.18 |
8 |
40S |
43.20 |
219.08 |
12.7 |
8 |
80S |
65.63 |
219.08 |
18.23 |
8 |
120 |
91.30 |
219.08 |
23.012) |
8 |
160 |
112.97 |
prime quality ISO certified Titanium Pipe suppliers at low price.
- Positive Material Identification – PMI Testing
- Intergranular Corrosion (IGC) Test
- Flaring Test
- Micro and MacroTest
- Flattening Test
- Chemical Analysis – Spectro Analysis
- Hardness Test
- Pitting Resistance Test
- Mechanical Testing Such as Tensile of Area
1/8" IPS(.405"O. D.) |
3 1/2" IPS( 4.000"O. D.) |
|---|---|
SCH 40, 80 |
SCH 10, 40, 80, 160, XXH |
1/4" IPS(.540"O. D.) |
4" IPS(4.500"O. D.) |
SCH 10, 40, 80 |
SCH 10, 40, 80, 160, XXH |
3/8" IPS(.675"O. D.) |
5" IPS( 5.563"O. D.) |
SCH 10, 40, 80 |
SCH 10, 40, 80, 160, XXH |
1/2" IPS(.840"O. D.) |
6" IPS(6.625"O. D.) |
SCH 5, 10, 40, 80, 160, XXH |
SCH 5, 10, 40, 80, 120, 160, XXH |
3/4" IPS(1.050"O. D.) |
8 ” IPS(8.625"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH 5, 10, 40, 80, 120, 160, XXH |
1" IPS:(1.315′O. D.) |
10" IPS(10.750"O. D.) |
SCH 5, 10, 40, 80, 160, XXH |
SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
1-1/4" IPS(1.660"O. D.) |
12" IPS(12.750"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
1-1/2" IPS(1.900"O. D.) |
14" IPS(14.000"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH10 (.188), SCH40 (.375) |
2" IPS(2.375"O. D.) |
16" IPS(16.000"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH10(.188), SCH40(.375) |
2 1/2" IPS(2.875"O. D.) |
18" IPS (18.000"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH-40 (.375) |
3" IPS( 3.500"O. D.) |
|
SCH 5, 10, 40, 80, 160, XXH |
As Oldest Titanium Pipe suppliers offer these DIN 2.4858 Pipe in a wide range of sizes, from thin wall to thick wall Titanium Pipe in seamless or welded forms
| Titanium Pipe O.D. (in.) |
Wall Thickness of Titanium Pipe (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| .028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
| Working Pressure (psig) | ||||||||
| 1/8 | 7900 | 10100 | ||||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 3/8 | 3100 | 4400 | 6100 | |||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 3/4 | 2200 | 3000 | 4000 | 4600 | ||||
| 1 | 2200 | 2900 | 3400 | 3900 | 4300 | |||
Inconel
Inconel is a family of austenitic nickel-chromium-based superalloys.
Composition of Inconel
| Inconel | Element (% by mass) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ni | Cr | Fe | Mo | Nb | Co | Mn | Cu | Al | Ti | Si | C | S | P | B | |
| 601 | 72.0 | 14.0–17.0 | 6.0–10.0 | 1.0 | 0.5 | 0.5 | 0.15 | 0.015 | |||||||
| 617 | 44.2–56.0 | 20.0–24.0 | 3.0 | 8.0–10.0 | 10.0–15.0 | 0.5 | 0.5 | 0.8–1.5 | 0.6 | 0.5 | 0.15 | 0.015 | 0.015 | 0.006 | |
| 601 | 58.0 | 20.0–23.0 | 5.0 | 8.0–10.0 | 3.15–4.15 | 1.0 | 0.5 | 0.4 | 0.4 | 0.5 | 0.1 | 0.015 | 0.015 | ||
| 690 | 59.5 | 30 | 9.2 | 0.35 | 0.01 | 0.02 | 0.35 | 0.019 | 0.003 | ||||||
| 718 | 50.0–55.0 | 17.0–21.0 | balance | 2.8–3.3 | 4.75–5.5 | 1.0 | 0.35 | 0.2–0.8 | 0.65–1.15 | 0.3 | 0.35 | 0.08 | 0.015 | 0.015 | 0.006 |
| X-750 | 70.0 | 14.0–17.0 | 5.0–9.0 | 0.7–1.2 | 1.0 | 1.0 | 0.5 | 0.4–1.0 | 2.25–2.75 | 0.5 | 0.08 | 0.01 | |||
Titanium
Titanium metal might be a particularly strong metal for designing applications since this metal is corrosion-resistant furthermore this metal is incredibly strong and especially light. It is 40% lighter than steel however as strong as high-strength steel.
Titanium Compositions (percentages)
| Grade | C | N | O | H | Ti | Fe |
| Ti Gr 1 | .08 max | .03 max | .18 max | .015 max | bal | .20 max |
| Ti Gr 4 | .08 max | .05 max | .40 max | .015 max | bal | .50 max |
| Ti Gr 7 | .08 max | .03 max | .25 max | .015 max | bal | .30 max |
| Ti Gr 9 | .08 max | .03 max | .15 max | .015 max | - | .25 max |
| Ti Gr 12 | .08 max | .03 max | .25 max | 0.15 max | - | .30 max |
We Guarantee Fastest Delivery of Asme Sb861 Ti ERW Pipe with All Documents Including Mill Certificate
Titanium Pipe is regularly bent on ordinary pipe bending equipment. Mandrel benders are suggested especially for tight bends. Bends made without a mandrel require bigger radii. In the event that more modest radius bends are required, it very well might be important to bend the tubing at 400°-600°F (204°-316°C).
NPS |
Outside Diameter |
Wall Thickness |
Weight |
Weight |
|||
in |
mm |
in |
mm |
Sched |
kg/Mtr |
Lb/ft |
|
1/2″ |
0.840 |
21 |
0.109 |
2.769 |
40 STD |
1.268 |
0.851 |
0.147 |
3.734 |
80 STD |
1.621 |
1.088 |
|||
3/4″ |
1.050 |
27 |
0.113 |
2.870 |
40 STD |
1.684 |
1.131 |
0.154 |
3.912 |
80 STD |
2.195 |
1.474 |
|||
1″ |
1.315 |
33 |
0.133 |
3.378 |
40 STD |
2.501 |
1.679 |
0.179 |
4.547 |
80 STD |
3.325 |
2.172 |
|||
1 1/4″ |
1.660 |
42 |
0.140 |
3.556 |
40 STD |
3.385 |
2.273 |
0.191 |
4.851 |
80 STD |
4.464 |
2.997 |
|||
1 1/2″ |
1.900 |
48 |
0.145 |
3.683 |
40 STD |
4.048 |
2.718 |
0.200 |
5.080 |
80 STD |
5.409 |
3.361 |
|||
2″ |
2.375 |
60 |
0.154 |
3.912 |
40 STD |
5.441 |
3.653 |
0.218 |
5.537 |
80 STD |
7.480 |
5.022 |
|||
2 1/2″ |
2.875 |
73 |
0.203 |
5.516 |
40 STD |
8.629 |
5.793 |
0.276 |
7.010 |
80 STD |
11.411 |
7.661 |
|||
3″ |
3.500 |
89 |
0.216 |
5.486 |
40 STD |
11.284 |
7.576 |
0.300 |
7.620 |
80 STD |
15.272 |
10.253 |
|||
4″ |
4.500 |
114 |
0.237 |
6.020 |
16.073 |
10.790 |
|
0.337 |
8.560 |
22.318 |
14.983 |
||||
6″ |
6.625 |
168 |
0.188 |
4.775 |
19.252 |
12.924 |
|
0.203 |
5.516 |
20.739 |
13.923 |
||||
0.219 |
5.563 |
22.318 |
14.983 |
||||
0.250 |
6.350 |
25.354 |
17.021 |
||||
0.280 |
7.112 |
40 STD |
58.263 |
18.974 |
|||
0.312 |
7.925 |
31.334 |
21.036 |
||||
0.375 |
9.525 |
37.285 |
25.031 |
||||
0.432 |
10.973 |
80 XHY |
42.561 |
28.573 |
|||
0.500 |
12.700 |
48.719 |
32.708 |
||||
8″ |
8.625 |
219 |
0.188 |
4.775 |
25.233 |
16.940 |
|
0.203 |
5.156 |
27.198 |
18.259 |
||||
0.219 |
5.563 |
29.286 |
19.661 |
||||
0.250 |
6.350 |
20 |
33.308 |
22.361 |
|||
0.277 |
7.036 |
30 |
36.786 |
24.696 |
|||
0.322 |
8.179 |
40 |
42.352 |
28.554 |
|||
0.375 |
9.525 |
49.216 |
33.041 |
||||
0.406 |
10.312 |
60 |
53.085 |
35.638 |
|||
0.500 |
12.700 |
80 XHY |
64.627 |
43.388 |
|||
10″ |
10.750 |
273 |
0.188 |
4.775 |
31.588 |
21.207 |
|
0.219 |
5.563 |
36.689 |
24.631 |
||||
0.250 |
6.350 |
20 |
41.759 |
28.035 |
|||
0.307 |
7.798 |
30 |
51.002 |
34.240 |
|||
0.344 |
8.738 |
56.946 |
38.231 |
||||
0.365 |
9.271 |
40 STD |
63.301 |
40.483 |
|||
0.438 |
11.125 |
71.852 |
48.238 |
||||
0.500 |
12.700 |
60 XHY |
81.530 |
54.735 |
|||
0.594 |
15.088 |
80 |
95.969 |
64.429 |
|||
12″ |
12.750 |
324 |
0.188 |
4.775 |
37.570 |
25.222 |
|
0.219 |
5.563 |
43.657 |
29.309 |
||||
0.250 |
6.350 |
49.713 |
33.375 |
||||
0.281 |
7.137 |
55.739 |
37.420 |
||||
0.312 |
7.925 |
61.735 |
41.445 |
||||
0.375 |
9.525 |
73.824 |
49.562 |
||||
0.406 |
10.312 |
79.727 |
53.525 |
||||
0.500 |
12.700 |
97.438 |
65.415 |
||||
0.562 |
14.275 |
108.966 |
73.154 |
||||
14″ |
14.000 |
356 |
0.188 |
4.775 |
41.308 |
27.732 |
|
0.219 |
5.563 |
48.012 |
32.233 |
||||
0.250 |
6.350 |
20 |
54.685 |
36.713 |
|||
0.281 |
7.137 |
61.327 |
41.172 |
||||
0.312 |
7.925 |
67.939 |
45.611 |
||||
0.375 |
9.525 |
STD |
81.281 |
54.568 |
|||
0.438 |
11.125 |
40 |
94.498 |
63.441 |
|||
0.500 |
12.700 |
XHY |
107.381 |
72.090 |
|||
| 0.625 | 15.875 |
132.983 |
89.278 |
||||
16” |
16.000 |
406 |
0.188 |
4.775 |
47.290 |
21.748 |
|
0.219 |
5.563 |
54.980 |
36.910 |
||||
0.250 |
6.350 |
10 |
62.639 |
42.053 |
|||
0.281 |
7.137 |
70.268 |
47.174 |
||||
0.312 |
7.925 |
20 |
77.866 |
52.275 |
|||
0.344 |
8.738 |
85.677 |
57.519 |
||||
0.375 |
9.525 |
30 STD |
93.213 |
62.578 |
|||
0.438 |
11.125 |
108.433 |
72.797 |
||||
0.500 |
12.700 |
40 XHY |
123.289 |
82.770 |
|||
18″ |
18.000 |
457 |
0.219 |
5.563 |
61.948 |
41.588 |
|
0.250 |
6.350 |
70.593 |
47.393 |
||||
0.281 |
7.137 |
79.208 |
53.176 |
||||
0.312 |
7.925 |
20 |
87.792 |
58.939 |
|||
0.375 |
9.525 |
STD |
105.144 |
70.588 |
|||
0.438 |
11.125 |
30 |
122.369 |
82.152 |
|||
0.500 |
12.700 |
XHY |
139.198 |
93.450 |
|||
0.562 |
14.275 |
40 |
155.904 |
104.666 |
|||
0.625 |
15.875 |
172.754 |
115.978 |
||||
20″ |
20.000 |
508 |
0.250 |
6.350 |
78.547 |
52.733 |
|
0.282 |
7.163 |
88.458 |
59.386 |
||||
0.312 |
7.925 |
97.719 |
65.604 |
||||
0.375 |
9.525 |
20 STD |
117.075 |
78.598 |
|||
0.438 |
11.125 |
136.305 |
91.508 |
||||
0.500 |
12.700 |
30 XHY |
155.106 |
104.130 |
|||
0.594 |
15.088 |
40 |
183.378 |
123.110 |
|||
0.625 |
15.875 |
192.640 |
129.328 |
||||
0.688 |
17.475 |
211.368 |
141.901 |
||||
24″ |
24.000 |
610 |
0.250 |
6.350 |
94.456 |
63.413 |
|
0.281 |
7.137 |
106.029 |
71.183 |
||||
0.312 |
7.925 |
117.573 |
18.932 |
||||
0.375 |
9.525 |
20 STD |
140.938 |
64.618 |
|||
0.438 |
11.125 |
164.176 |
110.219 |
||||
0.500 |
12.700 |
XHY |
186.923 |
125.490 |
|||
0.625 |
15.875 |
232.410 |
156.028 |
||||
0.688 |
17.475 |
40 |
255.148 |
171.293 |
|||
0.750 |
19.050 |
277.401 |
186.233 |
||||
30″ |
30.000 |
762 |
0.250 |
6.350 |
118.318 |
79.433 |
|
0.281 |
7.137 |
132.851 |
89.189 |
||||
0.312 |
7.925 |
10 |
147.353 |
98.925 |
|||
0.375 |
9.525 |
STD |
176.731 |
118.648 |
|||
0.438 |
11.125 |
205.983 |
138.286 |
||||
0.500 |
12.700 |
20 XHY |
234.647 |
157.530 |
|||
0.625 |
15.875 |
30 |
292.066 |
196.078 |
|||
0.688 |
17.475 |
320.817 |
215.380 |
||||
0.750 |
19.050 |
348.988 |
234.293 |
||||
36″ |
36.000 |
914 |
0.250 |
6.350 |
142.180 |
95.453 |
|
0.281 |
7.137 |
159.672 |
107.196 |
||||
0.312 |
7.925 |
10 |
177.133 |
118.918 |
|||
0.375 |
9.525 |
STD |
215.525 |
142.678 |
|||
0.438 |
11.125 |
247.790 |
166.353 |
||||
0.500 |
12.700 |
20 XHY |
282.372 |
198.570 |
|||
0.625 |
15.875 |
351.723 |
236.128 |
||||
0.688 |
17.475 |
386.487 |
259.467 |
||||
0.750 |
19.050 |
420.576 |
282.353 |
||||
42″ |
42.000 |
1067 |
0.312 |
7.925 |
206.914 |
138.911 |
|
0.375 |
9.525 |
STD |
248.319 |
166.708 |
|||
0.500 |
12.700 |
XHY |
33.097 |
221.610 |
|||
0.750 |
19.050 |
492.163 |
330.413 |
||||
48″ |
48.000 |
1219 |
0.375 |
9.525 |
STD |
284.112 |
190.738 |
0.438 |
11.125 |
331.404 |
222.487 |
||||
0.500 |
12.700 |
XHY |
377.822 |
253.650 |
|||
0.750 |
19.050 |
563.750 |
378.473 |
||||
0.875 |
22.225 |
655.969 |
440.383 |
||||
| Pipe Size (in) |
Diameter (in) MM |
Nominal Thickness (in) MM |
Transverse Areas (in2) MM2 |
Length of Pipe (ft per sq. foot of surface) |
Volume (ft3/ft) |
Weight | Number of Threads per inch of Screw | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| External | Internal | External | Internal | Steel | External Surface (ft) |
Internal Surface (ft) |
(lb/ft) | (kg/m) | ||||
| 1/8 | 0.405 | 0.27 | 0.07 | 0.13 | 0.06 | 0.07 | 9.43 | 14.20 | 0.0004 | 0.24 | 0.36 | 27 |
| ¼ | 0.540 | 0.36 | 0.09 | 0.23 | 0.10 | 0.13 | 7.07 | 10.49 | 0.0007 | 0.42 | 0.63 | 18 |
| 3/8 | 0.675 | 0.49 | 0.09 | 0.36 | 0.19 | 0.17 | 5.66 | 7.75 | 0.0013 | 0.57 | 0.84 | 18 |
| ½ | 0.840 | 0.62 | 0.11 | 0.55 | 0.30 | 0.25 | 4.55 | 6.14 | 0.0021 | 0.85 | 1.26 | 14 |
| ¾ | 1.050 | 0.82 | 0.11 | 0.87 | 0.53 | 0.33 | 3.64 | 4.64 | 0.0037 | 1.13 | 1.68 | 14 |
| 1 | 1.315 | 1.05 | 0.13 | 1.36 | 0.86 | 0.49 | 2.90 | 3.64 | 0.0060 | 1.68 | 2.50 | 11 ½ |
| 1 ¼ | 1.660 | 1.38 | 0.14 | 2.16 | 1.50 | 0.67 | 2.30 | 2.77 | 0.0104 | 2.27 | 3.38 | 11 ½ |
| 1 ½ | 1.900 | 1.61 | 0.15 | 2.84 | 2.04 | 0.80 | 2.01 | 2.37 | 0.0141 | 2.72 | 4.04 | 11 ½ |
| 2 | 2.375 | 2.07 | 0.15 | 4.43 | 3.36 | 1.08 | 1.61 | 1.85 | 0.0233 | 3.65 | 5.43 | 11 ½ |
| 2 ½ | 2.875 | 2.47 | 0.20 | 6.49 | 4.79 | 1.70 | 1.33 | 1.55 | 0.0333 | 5.79 | 8.62 | 8 |
| 3 | 3.500 | 3.07 | 0.22 | 9.62 | 7.39 | 2.23 | 1.09 | 1.25 | 0.0513 | 7.58 | 11.27 | 8 |
| 3 ½ | 4.000 | 3.55 | 0.23 | 12.56 | 9.89 | 2.68 | 0.95 | 1.08 | 0.0687 | 9.11 | 13.56 | 8 |
| 4 | 4.500 | 4.03 | 0.24 | 15.90 | 12.73 | 3.17 | 0.85 | 0.95 | 0.0884 | 10.79 | 16.06 | 8 |
| 5 | 5.563 | 5.05 | 0.26 | 24.30 | 20.00 | 4.30 | 0.69 | 0.76 | 0.1389 | 14.61 | 21.74 | 8 |
| 6 | 6.625 | 6.07 | 0.28 | 34.47 | 28.89 | 5.58 | 0.58 | 0.63 | 0.2006 | 18.97 | 28.23 | 8 |
| 8 | 8.625 | 7.98 | 0.32 | 58.42 | 50.02 | 8.40 | 0.44 | 0.48 | 0.3552 | 28.55 | 42.49 | 8 |
| 10 | 10.750 | 10.02 | 0.37 | 90.76 | 78.85 | 11.90 | 0.36 | 0.38 | 0.5476 | 40.48 | 60.24 | 8 |
| 12 | 12.750 | 11.94 | 0.41 | 127.64 | 111.90 | 15.74 | 0.30 | 0.32 | 0.7763 | 53.60 | 79.77 | 8 |
| 14 | 14.000 | 13.13 | 0.44 | 153.94 | 135.30 | 18.64 | 0.27 | 0.28 | 0.9354 | 63.00 | 93.75 | 8 |
| 16 | 16.000 | 15.00 | 0.50 | 201.05 | 176.70 | 24.35 | 0.24 | 0.25 | 1.2230 | 78.00 | 116.08 | 8 |
| 18 | 18.000 | 16.88 | 0.56 | 254.85 | 224.00 | 30.85 | 0.21 | 0.23 | 1.5550 | 105.00 | 156.26 | 8 |
| 20 | 20.000 | 18.81 | 0.59 | 314.15 | 278.00 | 36.15 | 0.19 | 0.20 | 1.9260 | 123.00 | 183.05 | 8 |
| 24 | 24.000 | 22.63 | 0.69 | 452.40 | 402.10 | 50.30 | 0.16 | 0.17 | 2.7930 | 171.00 | 254.48 | 8 |
Do you know who are the best buyers of Titanium Pipe
| Chile, iran, Canada, Philippines | ASTM B337 Titanium Seamless Pipe |
| United Arab Emirates (UAE), Norway, Romania, Europe | ASTM B338 Best Quality Titanium Pipe Seamless Welded |
| Netherlands, Russia, Malaysia, Sweden | Black Titanium Welded Color Stainless Steel Pipe |
| Egypt, Mexico, Los Alamos -Mexico, Malaysia | Titanium Alloy Pipe by ASTM B338 Standard |
| United Kingdom -UK, Malaysia, NY 12203 (USA), Singapore | Titanium Exhaust Pipe |
| UK, Poland, Philippines, Dammam -KSA | Stainless Steel Pipes Plated with Titanium |
| Singapore, Malaysia, Europe, Qatar | Cold Drawn Titanium Alloy Pipe Used in Aviation Industry |
| Malaysia, Japan, Thailand, Czechia | Customized Ti Pipes |
| Malaysia, Bangladesh, Colombia, China | Pure Titanium Seamless Pipe |
| Taiwan, South Africa, Kuwait, Philippines | Universal Performance Titanium Exhaust Pipe |
| Malaysia, South Korea, Singapore, Bahrain | Titanium Material Nitinol Pipe |
| UK, Philippines, Indonesia, Belgium | Explosion Welded Titanium Alloy Pipe Petrochemical Industry |
| Thailand, France, Hong Kong, Oman | Acid Shell Tube Heat Exchanger Titanium Pipe in PP Evaporator |
| Malaysia, Turkey, Malaysia, Germany | Auto Titanium Pipe Flex with Flange Exhaust Pipe |
| Malaysia, USA, Dubai, Finland | Titanium Seamless Welded Steel Pipe |
| Brazil, Saudi Arabia (KSA), Spain, UK | High Precision Titanium Alloy Round Pipe |
| Singapore, South Africa, Europe, UAE | ASTM B337 Titanium Pipe |
- Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
- Packing List including net weight and gross weight, number of boxes, Marks and Numbers
- Test Certificates certifying NACE MR0103, NACE MR0175
- Heat Treatment Charts
- Guarantee Letter
- Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
- NABL approved Laboratory Test Reports
- Fumigation Certificates
- Quality Assurance Plan (QAP)
- Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
- Form A for the purposes of the Generalized System of Preferences (GSP)
- Material Traceability Records
- Commercial Invoice which includes HS Code
- Raw Material Test Reports
- Aerospace
- Power Generation
- Oil and gas
- Chemical Processing
Clean the outside of the titanium pipe by utilizing a stainless steel brush and when welding, it is prescribed to utilize the spot method to help support the mass of the pipe. When warmed, titanium turns out to be exceptionally receptive and promptly consolidates with oxygen, nitrogen, hydrogen and carbon to shape oxides. Oxidized employs can bring about a pointless part that should be rejected. To diminish the danger of oxidation, the warmed region of the piping should be safeguarded from air until the temperature dips under 800 degrees.
Titanium alloys and the recommended filler material Commonly used
| ASTM Grade | Composition | UTS (min) Mpa | Filler | Comments |
1 |
Ti-0.15O |
240 |
ERTi-1 |
Commercially pure |
2 |
Ti-0.20O |
340 |
ERTi-2 |
,, |
4 |
Ti-0.35O |
550 |
ERTi-4 |
,, |
7 |
Ti-0.20O -0.2Pd |
340 |
ERTi-7 |
,, |
9 |
Ti-3Al-2.5V |
615 |
ERTi-9 |
Tube components |
5 |
Ti-6Al-4V |
900 |
ERTi-5 |
'Workhorse' alloy |
23 |
Ti-6Al-4V ELI |
900 |
ERTi-5ELI |
Low interstitials |
25 |
Ti-6Al-4V-0.06Pd |
900 |
ERTi-25 |
Corrosion resistant grade |
| Grade | C | N | O | H | Ti | Fe |
| Ti Grade 1 | .08 Max | .03 Max | .18 Max | .015 Max | Bal | .20 Max |
| Ti Grade 4 | .08 Max | .05 Max | .40 Max | .015 Max | Bal | .50 Max |
| Ti Grade 7 | .08 Max | .03 Max | .25 Max | .015 Max | Bal | .30 Max |
| Ti Grade 9 | .08 Max | .03 Max | .15 Max | .015 Max | - | .25 Max |
| Ti Grade 12 | .08 Max | .03 Max | .25 Max | 0.15 Max | - | .30 Max |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 4.5 G/Cm3 | 1665 °C (3030 °F) | Psi – 39900 , MPa – 275 | Psi – 49900 , MPa – 344 | 20 % |
| 4.43 G/Cm3 | 1632 °C (2970 °F) | Psi – 128000 , MPa – 880 | Psi – 138000 , MPa – 950 | 14 % |
Titanium Astm B861 Pipe Equivalent Material Grades
| STANDARD | UNS | WERKSTOFF NR. |
| Titanium Gr 2 | R50400 | 3.7035 |
| Titanium Gr 5 | R56400 | 3.7165 |
| ASTM B337 Titanium Pipes | 4 inch Ti Pipes |
| Ti Alloy ERW Pipes | Schedule 5S ASME SB861 Titanium Pipes |
| Nickel Ti Seamless Pipes | Ti Alloy Thick Wall Pipes |
| Ti Hollow Pipes | Titanium Alloy Electropolished Pipes |
| Nickel Ti Welded Pipes | ASME SB337 Titanium Large Pipes |
| ASME SB861 Titanium SMLS Pipes | ASTM B861 Titanium Polished Pipes |
| Ti CDW Pipes | Cold Drawn Ti Alloy Seamless Pipes |
| ASME SB337 Titanium EFW Pipes | Schedule 40 Ti Pipes |
| ASTM B861 Ti Round Pipes | Ti Alloy Exhaust Pipes |
| Capillary ASTM B337 Ti Thin Pipes | High pressure Ti Astm B861 Pipes |
| ASTM B337 Ti Alloy Custom Pipes | ASTM B337 Ti Capillary Pipes |
| Ti Alloy Square Pipes | Ti Thin Wall Pipes |
| Ti Bush Hex Pipes | Ti Alloy Clad Pipes |
| Ti Alloy Rectangular Pipes | Small diameter Ti Pipes |
| Ti Hexagonal Pipes | Ti Pipes material |
| Ti Fabricated Pipes | ASTM B337 Ti Alloy Annealed Pipes |
| Ti Alloy Beveled End Pipes | Ti Rectangle Pipes |
| ASTM B861 Ti Cold Drawn Pipes | Cold Drawn ASTM B337 Ti Welded Pipes |
are you looking for Titanium ® Round Pipe bending, welding and Weight Chart