Astm B348 Ti Alloy Rod Suppliers in India, view Pure titanium round stock
Pure Titanium Round Bar
Ti Alloy Hex Bar
Titanium Alloy Rod
Ready stock of ASME SB348 Pure Titanium Flat Bar in 3mm Thickness x 25mm Width, see titanium round bar price
ASTM B348 is a standard that covers annealed Pure Titanium Round Bar and grills. Titanium Flat Bars are often used in applications requiring higher corrosion resistance in a variety of aggressive media. Both product grades, in this case the ASTM B348 Titanium Flat Bar, must meet the chemical composition specifications.
Titanium rods may be welded, hot and cold worked, and machined with ease. Ti Alloy Round Bars are used in applications where corrosion resistance is critical or where working temperatures prevent the use of aluminium. Ti Alloy Bars are used in a variety of manufacturing applications ranging from oil and gas to pharmaceutical and maritime. Commercially pure ASTM B348 Titanium Rod is commonly used in heat exchanger applications.
Titanium Threaded Bars are preferable in terms of power and formability between 1 and 3. Titanium Hollow Bars outperform aluminium in terms of corrosion tolerance and operating range.Elements that have been purposefully applied by the ASTM B348 Pure Titanium Round Bar Suppliers must be detected, analysed, and recorded in the material's chemical review. Specimens from the ASTM B348 Titanium Cold Drawn Bar must be machined before stress checks can be performed.
Furthermore, the tensile properties of the ASTM B348 Titanium Hot Rolled Bar must be measured using a given strain rate by the yield power, which must also be determined at a rate. Titanium bars come in a variety of shapes and sizes, including Titanium Alloy Square Bar, Titanium Alloy Hex Bar, Titanium Rectangular Bar, and Titanium Flat Bars.
Table Of Content
| Description | Price list of Titanium Round bar in India |
|---|---|
| ASTM B348 Titanium Alloy Round Bar | US $ 22-37 / kg |
| Titanium Alloy Rod Carbide Cermet Round Bar for Crusher Hammer Head | US $ 13.9-14.8 / kg |
| ASTM B348 Forged Round Titanium Bar | US $ 18-40 / kg |
| Medical Used Titanium Round Bar Dental Implant Titanium Bar | US $ 15-45 / kg |
| Nuclear Power Industry Titanium Round Bar | US $ 5-15 / kg |
| ASTM Pure Alloy Round Titanium Bar (Gr1, Gr2, Gr3, G4, G5, Gr7, Gr9) | US $ 3.5-3.8 / kg |
| Titanium Alloy Tial6V6sn2 Tial6sn2zr4mo2si Tial6V4 Tial6zr5mo Round Flat Wire Bar | US $ 20000 / Ton |
| ASTM B348 Dia 8mm Titanium Round Bar | US $ 24 / kg |
If it's not too much trouble, note This is an estimated Cost of ASTM B348 Ti Alloy Round Bar in India. Kindly don't hesitate to get in touch with us for Free Quote and most recent Titanium Round Bar price list in India. Additionally contrast our Price and other Titanium Round Bar supplier in India & China.
| Grade 2 Titanium Round bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Kilograms / Meter | Kilograms / Foot | Size | Kilograms / Meter | Kilograms / Foot | Size | Kilograms / Meter | Kilograms / Foot |
| 3 milimeter | 0.0055 | 0.0017 | 20 milimeter | 2.0470 | 0.0753 | 3" | 35.0762 | 10.0900 |
| 1/8" | 0.0062 | 0.0019 | 22 milimeter | 2.0979 | 0.0908 | 3 to 1/4" | 41.0996 | 12.0800 |
| 5/32" | 0.0095 | 0.0029 | 7/8" | 3.0038 | 0.0926 | 3 to 1/2" | 48.0772 | 14.0850 |
| 4 milimeter | 0.0098 | 0.0030 | 24 milimeter | 3.0543 | 1.0080 | 3 to 3/4" | 55.0780 | 17.0001 |
| 3/16" | 0.0141 | 0.0043 | 25 milimeter | 3.0871 | 1.0180 | 4" | 63.0340 | 19.0306 |
| 5 milimeter | 0.0154 | 0.0047 | 1" | 3.0970 | 1.0210 | 4 to 1/4" | 72.0249 | 21.0908 |
| 7/32" | 0.0190 | 0.0058 | 26 milimeter | 4.0170 | 1.0271 | 4 to 1/2" | 80.0340 | 24.04487 |
| 6 milimeter | 0.0223 | 0.0068 | 27 milimeter | 4.0490 | 1.0368 | 4 to 3/4" | 90.0249 | 27.0366 |
| 1/4" | 0.0249 | 0.0076 | 1 to 1/8" | 5.0033 | 1.0534 | 5" | 99.0940 | 30.0461 |
| 7 milimeter | 0.0298 | 0.0091 | 30 milimeter | 5.0548 | 1.0691 | 5 to 1/2" | 121.0000 | 36.0690 |
| 5/16" | 0.0387 | 0.0118 | 1 to 1/4" | 6.0349 | 1.0924 | 6" | 143.0900 | 43.0860 |
| 8 milimeter | 0.0398 | 0.0120 | 32 milimeter | 6.0314 | 1.0894 | 6 to 1/2" | 167.0630 | 51.0093 |
| 9 milimeter | 0.0498 | 0.0152 | 1 to 3/8" | 7.0550 | 2.0303 | 7" | 196.0000 | 59.0432 |
| 3/8" | 0.0557 | 0.0170 | 35 milimeter | 7.0553 | 2.0390 | 7 to 1/2" | 225.0000 | 68.0226 |
| 10 milimeter | 0.0620 | 0.0189 | 36 milimeter | 7.0999 | 2.0438 | 8" | 254.055 | 77.0586 |
| 11 milimeter | 0.0748 | 0.0228 | 38 milimeter | 8.0903 | 2.0792 | 10" | 397.0140 | 121.0048 |
| 7/16" | 0.0761 | 0.0232 | 1 to 1/2" | 8.0951 | 2.0715 | |||
| 12 milimeter | 0.0889 | 0.0271 | 40 milimeter | 9.0872 | 3.0009 | |||
| 1/2" | 0.0994 | 0.0303 | 1 to 5/8" | 10.0449 | 3.0200 | |||
| 13 milimeter | 1.0043 | 0.0318 | 1 to 3/4" | 12.0179 | 3.0712 | |||
| 14 milimeter | 1.0207 | 0.0368 | 45 milimeter | 12.0555 | 3.0807 | |||
| 9/16" | 1.0256 | 0.0383 | 1 to 7/8" | 13.0977 | 4.0260 | |||
| 15 milimeter | 1.0391 | 0.0424 | 48 milimeter | 14.0205 | 4.0330 | |||
| 5/8" | 1.0551 | 0.0473 | 50 milimeter | 15.0414 | 4.0698 | |||
| 16 milimeter | 1.0578 | 0.0481 | 2" | 15.0906 | 4.0848 | |||
| 17 milimeter | 1.0791 | 0.0543 | 2 to 1/8" | 17.0963 | 5.0475 | |||
| 11/16" | 1.0880 | 0.0573 | 2 to 1/4" | 20.0128 | 6.0135 | |||
| 18 milimeter | 2.0001 | 0.0610 | 60 milimeter | 22.0205 | 6.0768 | |||
| 3/4" | 2.0237 | 0.0682 | 2 to 3/8" | 22.0435 | 6.0838 | |||
| 2 to 1/2" | 24.0856 | 7.0576 | ||||||
| 2 to 5/8" | 27.0409 | 8.0354 | ||||||
| 2 to 3/4" | 30.0083 | 9.0169 | ||||||
Weight Calculation Formula To calculate the weight of Titanium Round bar:
- ROUND – dia.mm2 x 0.004143 = Weight in lbs. per foot
- ROUND – dia.mm2 x 0.006165 = Weight in kilograms per metre
- HEXAGON – size mm2 x 0.00457 = Weight in lbs. per foot
- HEXAGON – size mm2 x 0.006798 = Weight in kilograms per metre
- SQUARE – Size mm2 x 0.00527 = Weight in lbs. per foot
- SQUARE – Size mm2 x 0.000785 = Weight in kilograms per metre
- U.K. tons per sq. inch (tons f/in2) x 15.4443 = Mega Pascals (MPa)
- Newton per sq. milimeter (N/mm2) x 0.064749 = U.K. tons per sq. inch
- Metres to feet x 3.2809
- Feet to metres x 0.3048
- Mega Pascals (MPa) x 0.64749 = U.K. tons f per square inch
|
|
Titanium Alloy Round Bar Condition
| ANN | Annealed |
| H&T | Hardened and tempered. |
| PH | Precipitation hardened. |
Titanium Hexagonal Bars are the most widely used type of titanium due to their excellent corrosion resistance, formability, and moderate strength. Meanwhile, Titanium Triangular Bars are available in a variety of sizes and shapes.
Titanium bar:
- M/Engineering: forged and hot rolled.
- Specification: Outside Diameter 30 milimeter to 300 milimeter X L <4000 milimeter, Outside Diameter 6 milimeter to 30 milimeter XL <6000 milimeter
- Grade: Ti-6AL4V, Gr5, Gr7, Gr9, Ti-6AL4VELI, Gr12
- Standard: ASME SB 348, ASTM B348, AMS 4928, ASTM F136, ISO 5832-2
- Shape: round /square
- Surface treatment: peeled/ polished/ turned/ pickled
Stock range of Titanium round bar
- Standard sizes range from 8 mm (5/16 in) to 200 mm (8 in) diameter
- Many non-standards are available in both metric and imperial diameters and sizes
Aircraft Grade Titanium Bar Types
Cut to size Titanium round bar
- All Titanium Bars can be cut to size to tolerances of ± 1.0 mm (0.040 in)
| Common Name | pure titanium |
|---|---|
| Standard | ASTM B348 , MIL-T-9047G, ASTM F136, JIS, AMS4928, ISO-5832-2(3), ASTM F67 etc |
| Titanium Alloy Round bar Specification | ASTM B348 |
| size of Titanium Round bar | Dia 3-~800 milimeter |
| size of Titanium Hex Bar | 2-100 milimeter A/F |
| size of ASTM B348 Ti Alloy Flat bar | 10 to 500 milimeter Width |
| 2 to 100 milimeter Thickness | |
| size of Ti Alloy Square bar | 4.0 to 100 milimeter |
| size of ASTM B348 Titanium Alloy Angle bar | 3 milimeter*20 milimeter*20 milimeter~12 milimeter*100 milimeter*100 milimeter |
| ASTM B348 Ti Section | thickness 3.0 - 12.0 milimeter |
| Channel Bar | section; 5.00 to 6.00 milimeter thickness, 80 x 40 milimeter - 150 x 75 milimeter |
| Ti Alloy Hollow Bar | 32 milimeter Outside diameter x 16 milimeter Inside Diameter to 250 milimeter Outside diameter x 200 milimeter Inside Diameter) |
| Size Titanium Billet | 1/2" to 495 milimeter Diameter |
| Size of Pure Titanium Rectangles | 33 x 30 - 295 x 1066 milimeter |
| Finish of ASTM B348 Titanium Round Bar | Centreless Ground & Black, smooth turned, hot rolled, peeled, Rough Turned, Cold (bright) drawn, hot rolled annealed, Polish, Grinding, Bright, |
| ASTM B348 Ti Alloy Round Bar Tolerance | H9, K10, H8, K12, H10, H13K9, H12, H11, K11, or as per need |
| Surface of Round Bar | Bright, Cold Drawn, Hairline, Sand Blasting Finished, Polished, Hot Rolled Pickled |
Pure Titanium bar Condition |
tempered and Hardened, annealed |
| AMS Specificaton of Titanium Round Bar | ASTM B348 (Grade 5), ASTM B348 (Grade 2), ASTM B348 (Grade 4), ASTM B348 (Grade 23), ASTM F67 (Grade 2), ASTM F67 (Grade 4), AMS-T-9047 (CP-70 GR.4), AMS 4921, AMS-T-9047 (6AL-6V-2SN), AMS 4930, AMS 4928, AMS 4967, AMS 4965, AMS 4979, AMS 4978, AMS 6931, AMS 6930, DMS 1583, AMS 4971, DMS 1570, ASTM F1472, ASTM F136, MIL-T-9047 (6AL-4V ELI), MIL-T-9047 (6AL-4V), MIL-T-9047 (CP-70 GR.4), MIL-T-9047 (6AL-6V-2SN), AMS 6935, AMS-T-9047 (6AL-4V), AMS-T-9047 (6AL-4V ELI), AMS 6936 and More |
| Technique of Ti Alloy Bar | Cold Drawn, Forged Rod, Cold Rolled, Rod, Hot Rolled |
| ASTM B348 Titanium Bar Processing | cutting Bar to 650 milimeter |
| Our Alloy Titanium Round bar dealers & distributors are located in | Pimpri-Chinchwad, New Delhi, Abu Dhabi, Port-of-Spain, Gimhae-si, Ahmedabad, Kuwait, Bengaluru, Khobar, India, Riyadh, Surat, Chennai, Janeiro, Vadodara, Noida, Perth, Istanbul, Dammam, Lagos, Calgary, Hyderabad, Bangalore, Muscat, Kolkata, Karachi, Ahvaz, Santiago, Nagpur,Indore, Gurgaon, Mexico Manama, Tau, Jamshedpur, Ankara, Coimbatore, Howrah, Thiruvananthapuram, Caracas, Courbevoie, Ranchi, Rajkot, Kanpur, Ludhiana, Gujarat, Sydney, Ernakulam, Baroda, Tehran, Mumbai, Bogota, Melbourne, London, Montreal |
ASME SB348/ ASTM B348 Standard Specification
| UNS | Products |
Grade 2 - UNS R50400 |
Titanium Flat Bar Titanium Square Bar Titanium Round Bar Titanium Hex Bar Titanium Rod |
Check live price of Titanium Alloy Hot Rolled & cold rolled bar, wide stock of Titanium Hex Bar & Square Bar Ex Mumbai
| Titanium Round bar Type | ISO Tolerance | SIZES (Inches) | SIZES (milimeter) |
|---|---|---|---|
| Titanium Polish and Cold Drawn Round Bar | h9-h8-h11-h10 | 1/8" – 3.000" | 3.00 to 75.000 |
| Titanium Alloy Grade 2 Ground and Cold Drawn Bar | h9-h8-h11-h10 | 5/6" – 2.050" | 10.00 to 75.000 |
| Ti Polished and Peeled Round Bar | h11-DIN 1013, h11 | 1.50" – 6.000" | 40.00 to 150.000 |
| Titanium Ground and Peeled Bar | h10-h9-h11 | 3/4″ – 2.000" | 20.00 to 50.000 |
ASTM B348 Ti Alloy Bars Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).
| Dimensions and siz of Titanium Round bar | |||||||
|---|---|---|---|---|---|---|---|
| Metric | US Bar | ASTM/ Canadian | Japanese | ||||
| Diameter (milimeter) | Bar Size | Diameter (Inch) | Bar Size | Diameter (milimeter2) | Bar Size | Diameter (milimeter) | Bar Size |
| 5.0 | 5.0 | 0.0250 | #2 | 100 | 10M | 6.0 | 6.0 |
| 5.05 | 5.05 | 0.0375 | #3 | 200 | 15M | 10 .0 | 10.0 |
| 6.0 | 6.0 | 0.0500 | #4 | 300 | 20M | 13.0 | 13.0 |
| 7.0 | 7.0 | 0.0625 | #5 | 500 | 25M | 16.0 | 16.0 |
| 8.0 | 8.0 | 0.0750 | #6 | 700 | 30M | 19.0 | 19.0 |
| 9.0 | 9.0 | 0.0875 | #7 | 1000 | 35M | 22.0 | 22.0 |
| 10.0 | 10.0 | 1.0000 | #8 | 1500 | 45M | 25.0 | 25.0 |
| 11.0 | 11.0 | 1.0125 | #9 | 2500 | 55M | 29.0 | 29.0 |
| 12.0 | 12.0 | 1.0250 | #10 | 32.0 | 32.0 | ||
| 14.0 | 14.0 | 1.0375 | #11 | 35.0 | 35.0 | ||
| 16.0 | 16.0 | 1.0500 | #12 | 38.0 | 38.0 | ||
| 18.0 | 18.0 | 1.0625 | #13 | 41.0 | 41.0 | ||
| 20.0 | 20.0 | 1.0750 | #14 | 44.0 | 44.0 | ||
| 22.0 | 22.0 | 1.0875 | #15 | 48.0 | 48.0 | ||
| 25.0 | 25.0 | 2.0000 | #16 | 51.0 | 51.0 | ||
| 28.0 | 28.0 | 2.0250 | #18 | 57.0 | 57.0 | ||
| 32.0 | 32.0 | ||||||
| 36.0 | 36.0 | ||||||
| 40.0 | 40.0 | ||||||
| 44.0 | 44.0 | ||||||
| 50.0 | 50.0 | ||||||
- USA : 40 feet
- length is 9 to 12 metres
| HS Code | Description |
|---|---|
| 81089090 | BAR ROUND TITANIUM ALLOY. 06.00MM (C.EXCISE NO VGN(30)26/G.B.ADLER/RTN/T/2016/1015 DT 18.11.16 ITEM NO 1) |
| 81089090 | BAR ROUND TITANIUM ALLOY. DIA 20.00MM (C.EXCISE NO VGN(30)26/G.B.ADLER/RTN/T/2016/1015 DT 18.11.16 ITEM NO 3) |
| 81089090 | BAR ROUND TITANIUM ALLOY. 16.00MM (C.EXCISE NO VGN(30)26/G.B.ADLER/RTN/T/2016/1015 DT 18.11.16 ITEM NO 4) |
| 81089090 | BAR ROUND TITANIUM ALLOY. DIA 14.00MM (C.EXCISE NO VGN(30)26/G.B.ADLER/RTN/T/2016/885 DT 07.10.16 ITEM NO 2) |
| 81089090 | TITANIUM ROUND BAR 6AL-4V 4.53 DIAX12 R/L (7 PCS) |
| 81089090 | BAR ROUND TITANIUM ALLOY. 18.00MM (C.EXCISE NO VGN(30)26/G.B.ADLER/RTN/T/2016/1015 DT 18.11.16 ITEM NO 2) |
| 81089090 | BAR ROUND TITANIUM ALLOY. 20.00MM (C.EXCISE NO VGN(30)26/G.B.ADLER/RTN/T/2016/885 DT 07.10.16 ITEM NO1) |
| 81089090 | BAR ROUND TITANIUM ALLOY. DIA 10.00MM (C.EXCISE NO VGN(30)26/G.B.ADLER/RTN/T/2016/885 DT 07/10/16 ITEM NO 4) |
| 81089090 | BAR ROUND TITANIUM ALLOY. DIA 12.00MM (C.EXCISE NO VGN(30)26/G.B.ADLER/RTN/T/2016/885 DT 07/10/16 ITEM NO 3) |
| 81089090 | TITANIUM ROUND BARS |
| Size (inches) | Specification | Materila |
| 5/8 | AMS-T-9047, AMS 4921 | Commercially Pure Titanium Bar |
| 1/2 | ||
| 3/8 | ||
| 1 | ||
| 1 1/4 | ||
| 7/8 | ||
| 1 1/2 | ||
| 1 1/8 | ||
| 1 7/8 | ||
| 1 3/8 | ||
| 1 3/4 | ||
| 1 5/8 | ||
| 3/4 | ||
| 2 1/4 | ||
| 2 | ||
| 2 1/8 | ||
| 2 1/2 | ||
| 2 3/8 | ||
| 3 1/2 | ||
| 7 | ||
| 73 |
| Bright drawn | BD | Slit rolled edge | SRE |
| Cold drawn | CD | Polished | P |
| Peeled and turned | P&T | Rough turned/peeled | RT |
| Cold finished | CF | Hot rolled pickled and annealed | HRAP |
| Centreless ground | CG | Hot finished | HF |
| Smooth turned | ST | reeled and Peeled | PR |
Best Material supplied in following projects
| Philippines, Chile, Canada, Iran | Ti Clad Copper Bar, Titanium Alloy Round Bar |
| Europe, United Arab Emirates (UAE), Romania, Norway | Titanium Tungsten Alloy Bar |
| Sweden, Netherlands, Malaysia, Russia | Titanium 6mm Round Bar |
| Malaysia, Egypt, Los Alamos -Mexico, Mexico | Pure Titanium Round Bar |
| Singapore, United Kingdom -UK, NY 12203 (USA), Malaysia | 25mm Titanium Round Bar |
| Dammam -KSA, UK, Philippines, Poland | Bright Titanium Round Bar in Stock |
| Qatar, Singapore, Europe, Malaysia | Astm b348 Pure Titanium Ti Alloy Round Bar |
| Czechia, Malaysia, Thailand, Japan | Titanium Round Bar for Galvanizing Lines/ Titanium Clad Metal for Surface Treatment Processors |
| Malaysia, China, Bangladesh, Colombia | Titanium Bar in Round for Industrial Use |
| South Africa, Philippines, Kuwait, Taiwan | High Quality ASTM B348 Gr2 Gr5 Forged Round Titanium Bar |
| Bahrain, Malaysia, Singapore, South Korea | Titanium Alloy Round Bar |
| Philippines, Belgium, UK, Indonesia | Preservative Alloy Titanium Round Bar in Titanium Metal Stock |
| Oman, Thailand, Hong Kong, France | 14mm Titanium Round Bar |
| Malaysia, Turkey, Germany | Titanium Alloy Ta3 Ta4 Ta5 Ta6 Round Flat Wire Bar |
| Dubai, Finland, Malaysia, USA | Titanium Alloy Round Bar |
| UK, Brazil, Spain, Saudi Arabia (KSA) | Bright Titanium Round Bar in Stock |
| UAE, Singapore, Europe, South Africa | Ta2 Titanium Alloy ASTM F67 Ti-6al-7nb Titanium Bar Round |
titanium round bar grade
- Titanium Grade 3
- Titanium Grade 2
- Titanium Grade 1
- Titanium Grade 5
- Titanium Grade 4
Cold Drawn Titanium Alloy Round Bar Tolerance & Steel Flat, Hexagon Tolerance
| Shape / Section | Permitted variation | diameter, Size, or across flats width |
| milimeter | milimeter | |
| Flat (thickness) | + 0 to to 0.0110 + 0 to to 0.0250 0 to to 0.0130 + 0 to to 0.0350 |
< 18 > 30.0 ≦ 50.0 > 18 ≦ 30 > 50.0 ≦ 80.0 |
| Round | + 0 to to 0.0070 + 0 to to 0.0140 + 0 to to 0.0100 + 0 to to 0.0085 + 0 to to 0.0120 |
≥6 ≦ 18 > 80 ≦ 100 > 30.0 ≦ 50.0 > 18 ≦ 30 > 50.0 ≦ 80.0 |
| Square and hexagon |
+ 0 to to 0.0090 + 0 to to 0.0250 + 0 to to 0.0130 + 0 to to 0.0110 + 0 to to 0.0160 |
≥ 6.0 ≦ 18.0 > 80 ≦ 105 > 30.0 ≦ 50.0 > 18 ≦ 30 > 50.0 ≦ 80.0 |
| Flat (width) | + 0 to to 0.0110 + 1.000 to to 1.000 + 0 to to 0.0160 + 0 to to 0.0130 + 0 to to 0.0190 + 0 to to 0.0350 + 0 to to 0.0220 + 0 to to 1.000 |
< 18 > 160 ≦ 320 > 30.0 ≦ 50.0 > 18 ≦ 30 > 50.0 ≦ 80.0 > 100 ≦ 130 > 80 ≦ 100 > 130 ≦ 160 |
Tolerances of Turned Titanium Alloy Round Bar
| Permitted variation | |
|---|---|
| milimeter | milimeter |
+ 0 to to 0.0085 + 0 to to 0.0070 + 0 to to 0.0100 + 0 to to 0.0140 + 0 to to 0.0120 + 0 to to 0.0160 + 0 to to 0.0250 + 0 to to 0.0210 + 0 to to 0.0185 + 0 to to 0.0230 |
> 18 ≦ 30 ≧ 6 ≦ 18 > 30.0 ≦ 50.0 > 80 ≦ 120 > 50.0 ≦ 80.0 > 120 ≦ 180 > 400 > 250 ≦ 315 > 180 ≦ 250 > 315 ≦ 400 |
Precision Titanium Alloy Round Bar Tolerances
| Section | diameter , Size |
overall variation Permitted | |||
| Class B | Class A | Class C | |||
| milimeter | milimeter | milimeter | milimeter | ||
| Round | ≧ 6.0 <75.0 | 0.0025 | 0.005 | 00.013 | |
ASTM B348 Ti Alloy Bright Round Bar Tolerance
| ISO “H” Series in Milimeter Titanium Grade 5 Round Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| NOMINAL SIZE | h6 | h5 | h12 | h8 | h7 | H10 | h9 | H11 |
| DIAMETER milimeter | ||||||||
| ~ - 3 | +0.0006/0 | +0.0004/0 | +0.01/0 | +0.0014/0 | +0.001/0 | +0.004/0 | +0.0025/0 | +0.006/0 |
| over 6 - 10 | +0.0009/0 | +0.0006/0 | +0.015/0 | +0.0022/0 | +0.0015/0 | +0.0058/0 | +0.0036/0 | +0.009/0 |
| over 3 - 6 | +0.0008/0 | +0.0005/0 | +0.012/0 | +0.0018/0 | +0.0012/0 | +0.0048/0 | +0.003/0 | +0.0075/0 |
| over 18 - 30 | +0.0013/0 | +0.0009/0 | +0.021/0 | +0.0033/0 | +0.0021/0 | +0.0084/0 | +0.0052/0 | +0.013/0 |
| over 10 - 18 | +0.0011/0 | +0.0008/0 | +0.018/0 | +0.0027/0 | +0.0018/0 | +0.007/0 | +0.0043/0 | +0.011/0 |
| over 50 - 80 | +0.0019/0 | +0.0013/0 | +0.03/0 | +0.0046/0 | +0.003/0 | +0.012/0 | +0.0074/0 | +0.019/0 |
| over 30 - 50 | +0.0016/0 | +0.0011/0 | +0.025/0 | +0.0039/0 | +0.0025/0 | +0.01/0 | +0.0062/0 | +0.016/0 |
| over 120 - 180 | +0.0025/0 | +0.0018/0 | +0.04/0 | +0.0063/0 | +0.004/0 | +0.016/0 | +0.01/0 | +0.025/0 |
| over 80 - 120 | +0.0022/0 | +0.0015/0 | +0.035/0 | +0.0054/0 | +0.0035/0 | +0.014/0 | +0.0087/0 | +0.022/0 |
| over 180 - 250 | +0.0029/0 | +0.002/0 | +0.0046/0 | +0.0072/0 | +0.0046/0 | +0.0185/0 | +0.0115/0 | +0.029/0 |
Why to pay extra when we provide Astm B348 Ti Alloy Hollow, Forged and bright Bar in exact sizes, Get free quote Now!
Titanium Round Bar Composition Standard
| Grade | N | Ti | C | H | O | Fe |
| Gr 4 | .05 Max | Bal | .08 Max | .015 Max | .40 Max | .50 Max |
| Gr 12 | .03 Max | - | .08 Max | 0.15 Max | .25 Max | .30 Max |
| Gr 9 | .03 Max | - | .08 Max | .015 Max | .15 Max | .25 Max |
| Gr 1 | .03 Max | Bal | .08 Max | .015 Max | .18 Max | .20 Max |
| Gr 7 | .03 Max | Bal | .08 Max | .015 Max | .25 Max | .30 Max |
ASTM B348 Titanium Round Bar Mechnanical Behaviour
| Grade | Elogation In 2 In. Or 50mm Min.,% |
Tensisle Strength | Yield Strength | Bend Test | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Min | Min | Min | Min | Max | Max | 0.070 To 0.187 In. (1.8mm To 4.75mm) Thickness |
Under 0.070 In. (1.8mm) Thickness |
|||
| Mpa | Ksi | Mpa | Ksi | Mpa | Ksi | |||||
| 1 | 24 | 240 | 35 | 138 | 20 | 310 | 45 | 2T | 1.5T | |
| 2 | 20 | 345 | 50 | 275 | 40 | 450 | 65 | 2.5T | 2T | |
| 3 | 18 | 450 | 65 | 380 | 55 | 550 | 80 | 2.5T | 2T | |
| 4 | 15 | 550 | 80 | 483 | 70 | 655 | 95 | 3T | 2.5T | |
| 5 | 10 | 895 | 130 | 828 | 120 | ... | ... | 5T | 4.5T | |
| 7 | 20 | 345 | 50 | 275 | 40 | 450 | 65 | 2.5T | 2T | |
| 9 | 15 | 620 | 90 | 483 | 70 | ... | ... | 3T | 2.5T | |
| 12 | 18 | 483 | 70 | 345 | 50 | ... | ... | 2.5T | 2T | |
| CP Grades | Ti Alloys |
| Grade 2 | 6AL-4V ELI or Grade 23 |
| Grade 1 | 6Al-4V or Grade 5 |
| Grade 4 | 5Al-2.5Sn |
| Grade 3 | Grade 12 |
| Grade 11 | 15V-3Cr-3Sn-3Al |
| Grade 7 | 6Al-2Sn-4Zr-2Mo |
| 3Al-2.5V | |
| 8Al-1Mo-1V | |
| 3Al-8V-6Cr-4Mo-4Zr | |
| 6Al-6V-2Sn | |
| 13V-11Cr-3Al |
| UNS | Grades | UNS | Grades |
|---|---|---|---|
| R50550 | Commercially Pure Grade 3 | R50700 | Commercially Pure Grade 4 |
| R50350 | Commercially Pure Grade 1 | R50400 | Commercially Pure Grade 2 |
| R56320 | Titanium Grade 9 | R52252 | Commercially Pure Grade 11 |
| R54520 | Titanium Grade 6 | R52400 | Commercially Pure Grade 7 |
| R52252 | Commercially Pure Grade 17 | R52404 | Commercially Pure Grade 26 |
| R53400 | Commercially Pure Grade 12 | R52402 | Commercially Pure Grade 16 |
| R56404 | Titanium Grade 29 | R56410 | Ti-10V-2Fe-3Al |
| R52404 | Commercially Pure Grade 27 | R56323 | Titanium Grade 28 |
| – | Ti-3Al-8V-6Cr-4Mo-4Zr | – | Ti-4Al-4Mo-2Sn |
| R58010 | Ti-13V-11Cr-3Al3-8-6-44 | – | Ti-2.5Cu |
| – | Ti-5Al-1Sn-1Zr-1V-0.8Mo | R58650 | Ti-5Al-2Zr-2Sn-4Mo-4Cr |
| R54521 | Ti-5-2.5Sn ELI | – | Ti-5.8Al-4.0Sn-3.5Zr-0.7Nb-0.5Mo-0.35Si-0.06C |
| R56260 | Ti-6Al-2Sn-4Zr-6Mo | R56400 | Ti-6Al-4V |
| R56222 | Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.15Si | R54620 | Ti-6Al-2Sn-4Zr-2Mo |
| R56700 | Ti-6Al-7Nb | R56740 | Ti-7Al-4Mo |
| R56407 | Ti-6Al-4V ELI | R56620 | Ti-6Al-6V-2Sn |
| R54810 | Ti-8Al-1Mo-1V | – | TIMETAL 21S |
| ASTM B348 Ti Alloy Round Bar | ASTM B348 Ti Flat Bar |
| Pure Ti Bar | Ti Alloy Flat Bar Black |
| Ti Alloy Rounds | Alloy Ti Flat Bar Bright |
| Ti Bright Bar | Pure Ti Flat Bar Polished |
| Ti Alloy Rods | Alloy Ti Flat Bar Cold Drawn |
| ASTM B348 Alloy Ti Rod | ASTM B348 Ti Alloy Flat Bar Annealed |
| Ti Alloy Round Bars | Pure Ti Flat Bar stock |
| Ti Alloy Hex Bar | Ti Alloy Threaded Bar |
| ASTM B348 Ti Hex Black Bar | Ti Square Rod |
| Ti ASTM B348 Hex Bar Bright | Ti Alloy Hollow Bar |
| Pure Ti Hex Bar Polished | ASTM B348 Alloy Ti Hexagonal Bar |
| ASTM B348 Ti Hex Bar Cold Drawn | Ti Alloy Triangular Bar |
| Ti Alloy Hex Bar Annealed | Ti Alloy Cold Drawn Round Bar |
| Alloy Ti Forged Bar | ASTM B348 Ti Polished Bar |
| Pure Ti Square Bar | Ti ASTM B348 Polished Flat Bar |
| ASTM B348 Ti Alloy Square Bars Bright | Alloy Ti Bright Bars Cold Drawn |
| Pure Ti Square Bars Polished | ASTM B348 Ti Alloy Bright Bars Hot Rolled |
| Ti Alloy Square Bars Cold Drawn | Pure Ti Bright Bars material |
| Ti Square Bars Annealed | Ti Alloy Bright Bars Flat |
| Ti Alloy Rectangular Bars Black | Ti Bright Bars Hex |
| ASTM B348 Alloy Ti Rectangular Bars Bright | Ti Alloy Bright Bars Hollow |
| Ti Alloy Rectangular Bars Polished | Pure Ti Polished Round Bars |
| Ti Alloy Rectangular Bars Cold Drawn | ASTM B348 Ti Polished Square Bars |
| ASTM B348 Ti Rectangular Bars Annealed | Ti Alloy Polished Hex Bars |
| Ti ASTM B348 Rectangular Bars stock | Alloy Ti Polished Bars Stock |
| Pure Ti Rectangular Bars | Ti Alloy Threaded Bars Black |
| ASTM B348 Alloy Ti Threaded Bars M12 | ASTM B348 Ti Threaded Bars Stock |
| Alloy Ti Square Bar Black | Pure Ti Black Bar |
| Ti Alloy Threaded Bar M16 | ASTM B348 Ti Alloy Threaded Rods |
Manufacturer & exporter of ASTM B348 Titanium Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed round bars in India.
- Aerospace Applications
- Jet Engines
- Airframes
- Industrial Applications
- Power Generation
- Chemical Processing
- Petroleum
- Automotive Industry
Manufacturer of Titanium Cold drawn bar, Black Bar and pump shaft in India