Nickel 201 Plate

 

Get custom sizes from Hairline Mirror finish Pure Nickel Alloy 201 Sheet Suppliers in india

Nickel 201 Plate
Nickel 201 Plate
Ni 201 Strip
Ni 201 Strip
Pure Nickel 201 Sheet
Pure Nickel 201 Sheet

 

Looking for specific size in ASTM B162 UNS N02201 nickel Strip ? Check stock of DIN 2.4068 Foil and Coil , contact us to request a quote

 

Nickel is one of the most durable metals on the planet, and it is one of several commodities that allow us to survive and flourish in the modern world. Nickel 201 plate functions well in reducing conditions, but it may also be used in oxidising environments if a passive oxide film forms. Nickel 201 plate is used in applications such as aerospace, chemical and petrochemical manufacturing, food processing, and marine and water treatment.

While manufacturers warn that the UNS N02201 Coil can be severely corroded in oxidising salt solutions. Since the DIN 2.4068 Foil is immune to all dry gases at room temperature, it can be used in conditions containing dry chlorine and hydrogen chloride at temperatures up to 550 degrees Celsius. As a result, the No 2201 Ni 201 Strip may be used to make aniline hydrochloride. Furthermore, the Pure Nickel 201 Sheet can be used to chlorinate aliphatic hydrocarbons including methane, benzene, or ethane.

While the exposure of the Nickel Alloy 201 shim to chlorates must be restricted. Ni 201 Alloy Cold Rolled Plate has excellent corrosion tolerance to both acids and alkalis and is most effective under reducing conditions. This property is also useful in applications where the Nickel Alloy 201 Shim Sheet is to be used in the production and handling of sodium hydroxide, a strongly caustic foundation. Pure 201 Nickel Hot Rolled Plate demonstrates good tolerance in salt solutions that are not only acidic or alkaline in nature, but also neutral. As a result, the 201 Nickel Clad Plate could be used in the soap industry to make soap.

 

Table Of Content

 

Specification of Nickel 201 Plate
Type Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
Nickel Alloy 201 Plate Length 0-12mm or as required
UNS N02201 Plate Width 0-2500mm or as required
Alloy 201 Plate Thickness 0.3 to 1201 mm or as required
Nickel 201 Plate Process Hot/ Cold Rolled
ASTM B162 2.4068 Plate surface No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B162 Alloy 201 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.

 

Other Nickel 201 Plate Information for buyers

Nickel 201 Plate, Sheet and Strip

ASTM B 162/ ASME SB 162, DIN 17750, ISO 6208

Tolerances of width and thickness
  • EN 10258 (formerly DIN 59381)
  • EN 10151 ASTM B162 Alloy 201 strip for springs
  • EN 10088 ASTM B162 Alloy 201 strip (general)
ASTM B162 Alloy 201 Plate standards and approvals
  • EN ISO 18286
  • EN 10051
  • EN 10088-1
  • ISO 15510
  • EN ISO 9445
  • ASTM A 480
  • ASTM A 959
  • ASME IID
Standard 201 alloy Plate & Sheet Sizes

1000 x 2010 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2010 x 2010 mm, 2010 x 4000 mm

  • Cold rolled 201 Nickel Plate 0.5-6.4 mm
  • Hot rolled 201 Nickel Plate 3.0–10.0 mm
Nickel Alloy 201 Plate Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B162 Alloy 201 Sheet suppliers
Availability of UNS N02201 Foil sizes Thickness : 8-100 microns (0.00031-0.004 in)
Width: Up to 500 mm (19.5 in)
Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Plasma profiles As per customer's drawings
Value added services for Alloy 201 Plate Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.
Nickel 201 Plate Manufacturer in india
  • ASTM B162 Alloy 201 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • 201 Nickel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • Alloy Nickel 201 Clad plate: Alloy Nickel 201 Clad plate is a composite steel plate made by bonding UNS N02201 Nickel 201 plate, etc.
  • ASTM B162 Alloy 201 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
Nickel 201 Plate Origin Indian Origin, European Origin, Japanese Origin
Packing of Alloy 201 Plate Bundles with waterproof cloth outside or plywood box
services for ASTM B162 Alloy 201 Coil
  • Cut-to-length
  • Slitting
  • Polishing
  • Blanking
Test UT, SGS testing, TUV etc
dealers & distributors are located in Pimpri-Chinchwad, Abu Dhabi, Port-of-Spain, Gimhae-si, New Delhi, Ankara, Baroda, Vadodara, Coimbatore, Mumbai, Kanpur, Khobar, Courbevoie, Ahvaz, Ranchi, Sydney, Thiruvananthapuram, Chennai, Bangalore, Ahmedabad, Calgary, Janeiro, London, India, Hyderabad, Kolkata, Tehran, Melbourne, Tau, Karachi, Nagpur,Indore, Ernakulam, Gurgaon, Mexico Caracas, Rajkot, Howrah, Bengaluru, Bogota, Montreal, Santiago, Ludhiana, Dammam, Kuwait, Perth, Jamshedpur, Manama, Lagos, Muscat, Riyadh, Surat, Istanbul, Gujarat, Noida
Why buy Alloy 201 plate from Jignesh Steel ?
  • Free quote
  • Free sample
  • EN 10204 3.1
  • Mill Test Certificate is supplied with shipment.
  • NABL Approved Lab Reports
  • Any third party inspection is accepted.
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Minimum Nitrogen content and Ferrite Count Test

 

What is Nickel 201 Plate?

It is extremely ductile over a broad temperature spectrum and can be welded and processed using traditional shop fabrication techniques. Nickel 201 (UNS N02201) is a wrought nickel substance that is dual-certifiable.

 

Price of Alloy 201 Plate in India
Description Price list of Nickel 201 Plate in India
High Purity Ni 201 Nickel Sheet /plate /foil /strip $25.00/ Kilogram
Nickel Anode Plate Alloy Sheet 201 $100.00-$1,000.00/ Piece
ASTM SB 162 UNS2201 NICKEL 201 plate/sheet Price $2,700.00-$3,000.00/ Ton
Nickel 201 UNS N02201 DIN W. Nr. 2.4061, 2.4068 Nickle alloy plate 6x1500x6000mm $1,450.00-$1,500.00/ Ton
nickel 201 pure nickel plate sheets for make fashion jewelry $20.00-$38.00/ Kilogram
nickel wide plate with best price nickel 201 99Ni $18.80-$20.00/ Kilogram
99.9% pure nickel strip N4 N6 Nickel 201 sheet/plate $25.00-$35.00/ Kilogram
polished nickle ni201 99.9% pure nickel sheet/plate/Foil/Strip

$16.00-$36.00/ Kilogram

Nickel anode plate alloy sheet 201

$15.00-$40.00/ Kilogram

If it's not too much trouble, note This is an estimated Cost of 201 Nickel Sheet in India. For best Price purchase directly from Nickel 201 Plate Supplier In India, check latest ASTM B162 Alloy 201 Plate price list & stock sizes if it's not too much trouble, mail us.

 

melting range of ASTM B162 Alloy 201 Plate
ASTM B162 Alloy 201 Plate melting range
°F: 2615-2635
°C: 1435-1446

 

Nickel 201 Plate Types
ASTM B162 Alloy 201 Perforated Sheet
ASTM B162 Alloy 201 Perforated Sheet
Alloy Nickel 201 Shim Stock
Alloy Nickel 201 Shim Stock
Alloy 201 Nickel Clad Plate
Alloy 201 Nickel Clad Plate
Nickel 201 Din 2.4068 Cold Rolled Sheet
Nickel 201 Din 2.4068 Cold Rolled Sheet
ASTM B162 Alloy 201 Strip
ASTM B162 Alloy 201 Strip
201 Nickel Shim Sheet
201 Nickel Shim Sheet
Alloy Nickel 201 Strip Tape
Alloy Nickel 201 Strip Tape
UNS N02201 Nickel 201 Chequered Plate
UNS N02201 Nickel 201 Chequered Plate
ASTM B162 Alloy 201 Sheet
ASTM B162 Alloy 201 Sheet
201 Nickel Plate
201 Nickel Plate
Alloy Nickel 201 Coil
Alloy Nickel 201 Coil
UNS N02201 Nickel 201 Foil
UNS N02201 Nickel 201 Foil
Nickel 201 Superalloy Mesh Plate
Nickel 201 Superalloy Mesh Plate
Nickel Alloy 201 Checker Plate
Nickel Alloy 201 Checker Plate
2.4068 Nickel 201 Hot Rolled Plate
2.4068 Nickel 201 Hot Rolled Plate
Nickel Alloy 201 Cold Rolled Plate
Nickel Alloy 201 Cold Rolled Plate

 

Weight per Unit of Alloy 201 Nickel Plate
Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

density of UNS N02201 Nickel 201 Plate
UNS N02201 Nickel 201 Plate density
lb/in 3 : 0.321
g/cm 3: 8.89

 

Sizes of 201 Nickel Plate
Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.600"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2010/2500/3000 mm.

 

Features of Din 2.4068 Plate
  • Resistance to neutral and alkaline salt solutions
  • High electrical conductivity
  • Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations
  • Excellent resistance to caustic alkalies
  • Excellent resistance to dry fluorine
  • Excellent corrosion resistance to distilled and natural waters
  • Widely used to handle caustic soda
  • Good thermal, electrical and magnetostrictive properties
  • Highly resistant to various reducing chemicals

 

Ready Stock of Alloy Nickel 201 Plate
Types of Nickel 201 Plate we stock:
ASTM B162 Alloy 201 Chequered Plates Alloy 201 Quarto Plates
201 Nickel Plates UNS N02201 Rolling Plates
Alloy 201 Hot Rolled Plates ASTM B162 Alloy 201 Perforated Plates
UNS N02201 Nickel 201 Cold Rolled Plates Alloy 201 Bbq Plates
ASTM B162 Alloy 201 Plates 2b Finish Alloy 201 Nickel Diamond Plates
Alloy Nickel 201 Plates Mill Finish Din 2.4068 Thin Plates
Alloy 201 Nickel Clad Plates UNS N02201 Tisco Plates
Din 2.4068 Chequer Plates Nickel Alloy Tread Plates
UNS N02201 Checker Plates Din 2.4068 Polished Plates
Nickel Alloy Plates Mirror Finish Alloy 201 Chequered Plates
Din 2.4068 Plates Brushed Finish Nickel 201 Superalloy Hot Rolled Sheet
Alloy 201 10mm Plates Alloy 201 Cold Rolled Sheet
201 Superalloy 1/4 Inch Plates 2.4068 Perforated Sheet
Alloy 201 Custom Cut Plates Alloy 201 Sheet
2.4068 Checkered Plates ASTM B162 Alloy 201 Laser Cut Plates
Alloy 201 Embossed Plates 201 alloy Plasma Cutting Plates

 

Nickel Alloy 201 thickness tolerance chart

Tolerances on thickness of steel plates

                                              Tolerance over and under nominal thickness t (mm)
Width w (mm) 2.5<t <4.5 4.5<t <6.0 6.0<t <8.0 8.0<t <10.0 10.0<t <12.5 12.5<t <16.0 16.0<t <20.0  20.0<t <25.0 25.0<t <30.0 30<t <40.0
w < 1201 0.20  0.23 0.30 0.32 0.35 0.80 0.80 0.80 1.0 1.4
1201< w <1500 0.20 0.25 0.30 0.35 0.38 0.80 0.80 0.90 1.0 1.4
1500< w <1800 0.20 0.28 0.32 0.38 0.40 0.80 0.80 0.90 1.1 1.5
1800< w <2100 0.20     0.30      0.36     0.40     0.45      0.80      0.80      0.90      1.1         1.5        
2100< w <2400   0.80 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.5
2400< w <2700   0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.3 1.7
2700< w <3000   0.80 0.90 1.0 1.0 1.0 1.1 1.3 1.4 1.8

 

Tolerances on length of plates
                                                                                                     Tolerance(mm)                                 
Nominal length (mm)                                         Minus Plus
L < 2,000 0                                                   10                                                     
2,000 L < 8,000 0 0.005 times L
L > 8,000 0 40

  

Tolerances on width of plates
                                                                                                 Tolerance (mm)
  Trimmed edge                                                Mill edge                                              
Nominal width (mm) Minus Plus Minus Plus
w < 1201 0 3 0 20
1201 < w < 1500 0 5 0 20
w > 1500 0 5 0 20

 

 

Get Quick delivery of ASME SB 162 Ni 201 Nickel Hot Rolled Plate and Ni 201 Shim Stock at best price in india with certification

 

Dimensions chart of Nickel 201 Plate

ASTM B162 Alloy 201 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

 

ASTM B162 201 Alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

 Ready stocm of Nickel 2201 2D and JIS NW 2201 Polished Plate, Compare Our Price with other Ni 201 Alloy Cold Rolled Plate manufacturer in india

 

ASTM B162 Alloy 201 Sheet, Plate & Foil Difference
  • Thickness greater than 6.35 mm is called a Nickel 201 Plate.
  • Thickness less than 0.15mm is called a Nickel 201 Foil.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Nickel 201 Sheet.

 

AMS 5553 Nickel 201 Sheet Stock List
>
Alloy Product form Dimension
NICKEL 201 (99.0 Ni min) Strip; annealed 0.10x150 mm x coil, 0.13 kg/m
NICKEL 201 (99.0 Ni min) Strip; annealed 0.125x139 mm x coil, 0.154 kg/m
NICKEL 201 (99.4 Ni min) Strip; annealed 0.15x200 mm x coil, 0.27 kg/m
NICKEL 201 (99.0 Ni min) Strip; cold rolled, annealed 0.20x99.5 mm x coil, 0.177 kg/m
NICKEL 201 (99.0 Ni min) Strip; annealed 0.20x200 mm x coil, 0.36 kg/m
NICKEL 201 (99.0 Ni min) Strip; cold rolled, annealed 0.30x200 mm x coil, 0.54 kg/m
NICKEL 201 (99.0 Ni min) Sheet; cold rolled, annealed 0.5x1000x2000 mm, 9.0 kg/pc
NICKEL 201 (99.0 Ni min) Sheet; cold rolled, annealed 0.6x1000x2500 mm, 14.7 kg/pc
NICKEL 201 (99.0 Ni min) Sheet; cold rolled, annealed 0.7x1000x2500 mm, 17.0 kg/pc
NICKEL 201 (99.0 Ni min) Sheet; cold rolled, annealed 0.8x1000x2000 mm, 13.9 kg/pc
NICKEL 201 (99.0 Ni min) Sheet; cold rolled, annealed 1.0x1000x2000 mm, 18.0 kg/pc
NICKEL 201 (99.0 Ni min) Sheet; cold rolled, annealed 1.5x1000x2000 mm, 27.8 kg/pc
NICKEL 201 (99.0 Ni min) Sheet; cold rolled, annealed 2.0x1000x2000 mm, 36.3 kg/pc
NICKEL 201 (99.0 Ni min) Sheet; cold rolled, soft annealed, descaled, sheared 4.0x1200x3000 mm, 130 kg/pc
NICKEL 201 (99.0 Ni min) Plate; hot rolled, soft annealed, descaled, sheared 5.0x2000x4000 mm, 356 kg/pc
NICKEL 201 (99.0 Ni min) Plate; hot rolled, descaled, annealed 6.0x2000x4000 mm, 463 kg/pc
NICKEL 201 (99.0 Ni min) Plate; hot rolled, soft annealed, descaled 10.0x2000x3000 mm, 554 kg/pc
NICKEL 201 (99.0 Ni min) Blech; warmgewalzt, weichgegl¼ht, entzundert 10.0x1500x2000 mm
NICKEL 201 (99.0 Ni min) Plate; hot rolled, soft annealed, descaled 10.0x2000x6000 mm
NICKEL 201 (99.0 Ni min) Plate; hot rolled, soft annealed, descaled 10.0x935x6000 mm

 

Know which material supplied where
>
Belgium, Indonesia, Philippines, Dammam -KSA Electroplating High Pure Nickel Sheet Ni201 Plate
Europe, Qatar, France, Thailand Nickel 201 Sheet Pure Nickel Uns No2201 Plate 8*1200mm
Czechia, Germany, Malaysia, Thailand High Purity Ni 201 N4 N6 Nickel Sheet / Nickel Plate
USA, Bangladesh, Finland, Malaysia Ni201 Nickel Plate
Kuwait, South Africa, Brazil, Saudi Arabia (KSA) 201 Nickel Chrome Coating Pure Nickel Alloy Plate
Bahrain, Singapore, South Africa 99.99% Pure Battery Nickel 201 Plate
Nigeria, UK, Australia, Philippines Heat Exchangers Nickel 201 Plates
UAE, Hong Kong,  Malaysia, Oman Nickel 201 (Alloy 201/N02201) Stainless Steel Plate
Singapore, Iran, Italy, Chile Nickel 201 Sheet Pure Nickel Uns No2201 Plate 6*1200mm
Malaysia, Norway, Turkey, United Arab Emirates (UAE) Nickel 99.2 /Alloy 201 Pure Nickel Conductive Sheet/ Plate
Dubai, Netherlands,  Malaysia, Russia N4 Nickel 201 JIS 2.4061 Uns N02201 Pure Nickel Plate
Egypt, Spain, Mexico, UK High Pure Ni201 Nickel Charger Plate Price
UAE,  Malaysia, Europe, United Kingdom -UK Nickel Chromium Alloy Plate Nickel 201
Ellington -United States, Poland, Canada, UK Ni201, N4, N6 Customized Width Nichrome Nickel Plate
 Singapore, Canada, Malaysia, Philippines 8mm Nickel 201 Nickel Plate
Malaysia, Romania, Japan, Europe Sb162 N02201 99% Brushed Nickel 201 Plate
China,  Malaysia, Colombia, Sweden 0.2mm Pure Nickel 201 Sheet Plates

 

Equivalent of Nickel 201 Plate
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 201 N02201 2.4068 LC-Ni 99 NW 2201 NA 12 НП-2

 

Properties of Alloy 201 Plate

Alloy 201 Plate Chemical Composition
Nickel 201 Ni C Mo Mn Si Fe P S Cu Cr
Balance 0.15 max 0.35 max 0.35 max 0.40 max 0.01 max 0.25 max

 

Nickel 201 Plate Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %

 

ASTM B162 201 Nickel Plate hs code
HS Code Description
75062000 NICKEL 200/201 COIL 0.008X0.118, BEPO 4100039090
75061000 NICKEL 200/201 COIL ANNEALED (34.40 LBS)(FOR MFG)
75061000 NICKEL 200/201 COIL ANNEALED (44.4 LBS)(FOR MFG)
75062000 NICKEL ALLOY SHEET(RSN00048004000)(ALLOY NI201)(LENGTH: 1000,00MM)(1.200MM X 1219.000MM)
75062000 (MCR-009) NICKEL200/201 STRIPCOIL (CAPTIVE CONSUMPTION)
75062000 (MCR-009) NICKEL200/201 STRIPCOIL (CAPTIVE CONSUMPTION)
75062000 NICKEL ALLOY 200/201 SHEET3 MM ASTM B162 FOR CHEMICAL PLANT
75062000 NICKEL ALLOY 200/201 SHEET4.MM ASTM B162 FOR CHEMICAL PLANT

 

buy Cut to size N02201 Alloy 4mm Thick Clad and Flat Plate in Mumbai
Comparison Between Inconel and Nickel

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Composition of Inconel

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
601 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Nickel

Nickel could be a chemical component with symbol Ni and nuclear number 28. It could be a silvery-white brilliant metal with a slight golden tinge. Nickel has a place to the move metals and is difficult and bendable

Composition of Nickel

Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max 0.35 max 0.1 max 0.4 max 0.01 max 0.25 max
Nickel 201 Ni C Mo Mn Si Fe P S Cu Cr
Balance 0.15 max 0.35 max 0.35 max 0.40 max 0.01 max 0.25 max


uses of UNS N02201 plate
  • Salt production
  • Marine and offshore engineering
  • Reactors and vessels in which fluorine is generated and reacted with hydrocarbons
  • Manufacture and handling of sodium hydroxide, particularly at temperatures above 300° F
  • Caustic handling equipment
  • Food processing equipment