Monel K500 Plate

 

buy Cut to size ASTM B127 UNS N05500 Sheet & Coil stock from Supplier in india

Monel K500 Plate
Monel K500 Plate
UNS N05500 Strip
UNS N05500 Strip
Nickel Alloy K500 Sheet
Nickel Alloy K500 Sheet

 

Manufacturer of high quality No. 1 Finish DIN 2.4375 strip and Foil in Mumbai, india,

 

Because ASTM B127 covers rolled nickel-copper-based Monel 400, it can be used in the production of components such as plate, ASTM B127 Monel K500 Sheet, and strip. Similarly, the material used in the manufacture of DIN 2.4375 Strip, like Monel alloy 400, must not only adhere to the necessary mechanical properties of the standard, but also to the chemistry of the mentioned Alloy K500 B127 Coil.

Monel K500, also known as Monel UNS No5500 Sheet, is a nickel-copper-based alloy that has been age hardened. The alloy 2.4375 Monel K500 Shim Sheet blends the corrosion resistance properties of Alloy 400 with an improvement in its properties. This includes high intensity corrosion fatigue and erosion resistance.

Nickel Alloy K500 Shim Sheet is an alloy. It mixes the corrosion resistance properties of Alloy 400 with an improvement in properties This specifically includes high intensity corrosion fatigue and erosion resistance.Monel K500 Plate is made with the use of nickel copper alloy.It has 63% nickel and 28% copper minimum with other elemnts in its composition. These include carbon, manganese, silicon, sulfur and iron.

Monel Alloy K500 coils are available in thicknesses varying from 0.1 mm to 12 mm. Monel Alloy K500 coils are available in a variety of finishes, including hot rolled plate and cold rolled plate.

 

Table Of Content

 

Specification table of Monel K500 Plate
Type Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
Grade Alloy K500 (75 Ni/16 Cr) - UNS N05500 - Monel K500
Alloy K500 Plate Length 0-12mm or as required
Specification of Plate ASTM B127 UNS N05500, ASME SB127 sheet
K500 MonelPlate Width 0-2500mm or as required
UNS N05500 Plate Thickness 0.3 to 1200 mm or as required
ASTM B127 Alloy K500 Plate Process Hot/ Cold Rolled
UNS N05500 Plate surface No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B127 Alloy K500 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.

 

Other Monel K500 Plate Information for buyers

Alloy K500 Plate, Sheet and Strip
ASTM B127 UNS N05500, ASME SB127

DIN 17750 (Plate, Sheet and Strip), ISO 6208 (Plate, Sheet and Strip), BS3073NA18 (Strip), QQ-N-286 (Plate, Sheet and Strip), BS3072NA18 (Sheet and Plate)

 

Tolerances of width and thickness
  • EN 10258 (formerly DIN 59381)
  • EN 10151 ASTM B127 Alloy K500 strip for springs
  • EN 10088 ASTM B127 Alloy K500 strip (general)
Monel K500 Plate standards and approvals
  • EN ISO 18286
  • EN 10051
  • EN 10088-1
  • ISO 15510
  • EN ISO 9445
  • ASTM A 480
  • ASTM A 959
  • ASME IID
Standard ASTM B127 Alloy K500 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Cold rolled K500 Monel Plate 0.5-6.4 mm
  • Hot rolled K500 Monel Plate 3.0–10.0 mm
DIN 2.4375 Plate Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B127 Alloy K500 Sheet suppliers
Availability of UNS N05500 Foil sizes Thickness : 8-100 microns (0.00031-0.004 in)
Width: Up to 500 mm (19.5 in)
Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Plasma profiles As per customer's drawings
Value added services for 2.4375 Plate Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.
Nickel Alloy K500 Plate Manufacturer in india
  • ASTM B127 Alloy K500 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • K500 Monel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • Alloy Monel K500 Clad plate: Alloy Monel K500 Clad plate is a composite steel plate made by bonding UNS N05500 Monel K500 plate, etc.
  • ASTM B127 Alloy K500 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
Monel Alloy K500 Plate Origin Indian Origin, European Origin, Japanese Origin
Packing of UNS N05500 plate Bundles with waterproof cloth outside or plywood box
services for Monel K500 Coil
  • Cut-to-length
  • Slitting
  • Polishing
  • Blanking
Test UT, SGS testing, TUV etc
dealers & distributors are located in Abu Dhabi, Port-of-Spain, New Delhi, Pimpri-Chinchwad, Gimhae-si, Chennai, Montreal, Thiruvananthapuram, Sydney, Ahmedabad, Dammam, Bengaluru, Caracas, Howrah, London, India, Calgary, Perth, Ludhiana, Gujarat, Ernakulam, Rajkot, Riyadh, Surat, Courbevoie, Nagpur,Indore, Ahvaz, Santiago, Noida, Tau, Lagos, Tehran, Melbourne, Bangalore, Jamshedpur, Istanbul, Mexico Bogota, Coimbatore, Kuwait, Ankara, Mumbai, Kanpur, Khobar, Gurgaon Hyderabad, Muscat, Ranchi, Kolkata, Vadodara, Janeiro, Baroda, Manama, Ludhiana, Karachi
Why buy K500 Monel Plate from Jignesh Steel ?
  • Free quote
  • Free sample
  • EN 10204 3.1
  • Mill Test Certificate is supplied with shipment.
  • NABL Approved Lab Reports
  • Any third party inspection is accepted.
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Minimum Nitrogen content and Ferrite Count Test

 

Price of Alloy K500 Plate in India
Description Price list of Monel K500 Plate in India
Monel K500 Nickel Alloy Plate

US $1,000.00-$3,000.00/ Ton

Nickel copper alloy monel k500 plate US $18.00-$38.00/ Kilogram
Monel k500 Alloy plate

US $23.00-$68.00/ Kilogram

Nickel copper alloy ASTM B564 k500 sheet/plate

US $100.00-$1,000.00/ Piece

ASTM Nickel Alloy Monel K500 steel sheet N05500 2.4375 plate

US $28.00/ Kilogram

High Performance Nickel Based Alloy Monel K500 Sheet

US $12.00-$20.00/ Kilogram

Monel K500 nickel alloy steel sheet N05500 2.4375 plate

US $24.00/ Kilogram

High standard astm b127 monel k500 plate

US $18.00-$30.00/ Kilogram

Polished surface treatment nickel alloy Monel K500 plate

US $10.00-$35.00/ Kilogram

If it's not too much trouble, note This is an estimated Cost of K500 Monel Sheet in India. For best Price purchase directly from Monel K500 Plate Supplier In India, check latest ASTM B127 Alloy K500 Plate price list & stock sizes if it's not too much trouble, mail us.

 

What is Monel K500 Plate?

Monel Grade K500 Polished Plate is a precipitation hardened alloy formed by the adding of elements such as aluminium and titanium to the metal. Monel K500 Nickel Clad Plate maintains the outstanding corrosion resistance properties of Monel 400 as an alloy, with the inclusion of the alloy's improved tensile strength and toughness properties.

 

Monel K500 Plate Types
ASTM B127 Alloy K500 Sheet
ASTM B127 Alloy K500 Sheet
600  Inconel Plate
K500 Monel Plate
Alloy Monel K500 Coil
Alloy Monel K500 Coil
UNS N05500 Monel K500 Foil
UNS N05500 Monel K500 Foil
Monel K500 Superalloy Mesh Plate
Monel K500 Superalloy Mesh Plate
Nickel Alloy K500 Checker Plate
Nickel Alloy K500 Checker Plate
2.4375 Monel K500 Hot Rolled Plate
2.4375 Monel K500 Hot Rolled Plate
Nickel Alloy K500 Cold Rolled Plate
Nickel Alloy K500 Cold Rolled Plate
ASTM B127 Alloy K500 Strip
ASTM B127 Alloy K500 Strip
600  Inconel Shim Sheet
K500 Monel Shim Sheet
Alloy Monel K500 Strip Tape
Alloy Monel K500 Strip Tape
UNS N05500 Monel K500 Chequered Plate
UNS N05500 Monel K500 Chequered Plate
ASTM B127 Alloy K500 Perforated Sheet
ASTM B127 Alloy K500 Perforated Sheet
Alloy Monel K500 Shim Stock
Alloy Monel K500 Shim Stock
Alloy K500 Monel Clad Plate
Alloy K500 Monel Clad Plate
Monel K500 Din 2.4375 Cold Rolled Sheet
Monel K500 Din 2.4375 Cold Rolled Sheet

 

hs code of ASTM B127 K500 Monel Plate
HS Code Description
75062000 MONEL(NICKEL) SHEATH(PLATE) ALLOY K500 - 5.00 MM - [68 Nos] AS PER INV/P.LIST & P.O NO:4702000406
75062000 MONEL(NICKEL) SHEATH(PLATE) ALLOY K500 - 5.00 MM - [74 Nos] AS PER INV/P.LIST & P.O NO:4702000406
75062000 MONEL(NICKEL) SHEATH(PLATE) ALLOY K500 - 5.00 MM - [40 Nos] AS PER INV/P.LIST & P.O NO:4702000406
75062000 MONEL(NICKEL) SHEATH(PLATE) ALLOY K500 - 5.00 MM - [242 Nos] AS PER INV/P.LIST & P.O NO:4702000406

 

ASTM B127 Alloy K500 Sheet, Plate & Foil Difference
  • Thickness greater than 6.35 mm is called a Monel K500 Plate.
  • Thickness less than 0.15mm is called a Monel K500 Foil.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Monel K500 Sheet.

 

density of UNS N05500 Monel K500 Plate

ASTM B127 Alloy K500 Plate density
  • g/cm3 : 8.44
    lb/in.3 : .0.305

 

melting range of ASTM B127 Alloy K500 Plate
UNS N05500 Monel K500 Plate melting range
  • °F : 2400-2460
    °C : .1315-1350

 

Comparision Between Inconel and Monel

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Composition of Inconel

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Monel

Monel may be a gather of nickel alloys, basically composed of nickel (up to 67%) and copper, with little amounts of iron, manganese, carbon, and silicon.

Compositions (percentages) of Monel Alloys

Trade Name ASTM/AISI

Alloy type

UNS %Cu %Al %Ti %Fe %Mn %Si %Ni
Monel K500 B 127, B 164 N05500 28-34 2.5 max 2.0 max 0.5 max 63 min
Monel 401 N04401 28-34 2.5 max 2.0 max 63 min
Monel 404 N04404 Rem 0.05 max 0.5 max 0.1 max 0.1 max 52-57
Monel K-500 B 865 N05500 27-33 2.3-3.15 0.35-0.85 2.0 max 1.5 max 0.5 max 63 min
Monel 405 B 164 N04405 28-34 2.5 max 2.0 max 0.5 max 63 min


uses of UNS N05500 plate
  • Sour-gas service applications
  • Pump shafts and impellers in marine service
  • Oil and gas production safety lifts and valves
  • Oil well industry
  • Doctor blades and scrapers
  • Chains, cables, springs, valve trim, fasteners for marine service
  • Oil-well tools and instruments like drill collars

 

Dimensions chart of Monel K500 Plate

ASTM B127 Alloy K500 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

 

k500 alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

Monel K500 Plate Sizes
Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.600"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

thickness tolerance chart of Nickel Alloy K500 plate

Tolerances on thickness of steel plates

                                              Tolerance over and under nominal thickness t (mm)
Width w (mm) 2.5<t <4.5 4.5<t <6.0 6.0<t <8.0 8.0<t <10.0 10.0<t <12.5 12.5<t <16.0 16.0<t <20.0  20.0<t <25.0 25.0<t <30.0 30<t <40.0
w < 1200 0.20  0.23 0.30 0.32 0.35 0.80 0.80 0.80 1.0 1.4
1200< w <1500 0.20 0.25 0.30 0.35 0.38 0.80 0.80 0.90 1.0 1.4
1500< w <1800 0.20 0.28 0.32 0.38 0.40 0.80 0.80 0.90 1.1 1.5
1800< w <2100 0.20     0.30      0.36     0.40     0.45      0.80      0.80      0.90      1.1         1.5        
2100< w <2400   0.80 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.5
2400< w <2700   0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.3 1.7
2700< w <3000   0.80 0.90 1.0 1.0 1.0 1.1 1.3 1.4 1.8

 

Tolerances on length of plates
                                                                                                     Tolerance(mm)                                 
Nominal length (mm)                                         Minus Plus
L < 2,000 0                                                   10                                                     
2,000 L < 8,000 0 0.005 times L
L > 8,000 0 40

  

Tolerances on width of plates
                                                                                                 Tolerance (mm)
  Trimmed edge                                                Mill edge                                              
Nominal width (mm) Minus Plus Minus Plus
w < 1200 0 3 0 20
1200 < w < 1500 0 5 0 20
w > 1500 0 5 0 20

 

Call for small piece of ASME SB127 Monel Alloy K500 Shim Sheet to test before buying

 

Equivalent of Monel K500 Plate
STANDARD WERKSTOFF NR. UNS
Monel K500 2.4375 N05500

 

Properties of Alloy K500 Plate

Monel K500 Plate Chemical Composition
Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

 

UNS N05500 Plate Mechanical Properties

Ultimate Tensile

Yield Strength (0.2% OS)

Elong.

Hardness

Rockwell C, min.

Hardness Brinell 3000 kg, min.

Cold Worked/SR Over 1(25.4) to 3

Min

140 KSi

100 KSi

17.0

29

280

Max

         

Min

965 MPa

690 MPa

     

Max

         

Hot Worked/ Aged Hardened

Min

140 KSi

100 KSi

20.0

27

265

Max

         

Min

965 MPa

690 MPa

     

Max

 

 

Weight per Unit of Alloy K500 Plate
Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Following countries prefer to buy Monel K500 Plate material from India
Philippines, Iran, Chile, Canada Cupro Nickel Alloy Sheet Monel K500 Plate for Valve 5*200mm
Europe, Norway, United Arab Emirates (UAE), Romania Monel K500 Alloys Stainless Steel Plate Corrosion Resistant Alloy Steel Plate
Netherlands, Russia, Sweden, Malaysia Monel K500 Steel Plate
Malaysia, Mexico, Egypt, Los Alamos -Mexico Monel K500 (N05500) 2.4375/Corrosion-Resisting Alloy/Nickel Plate
Singapore, Malaysia, United Kingdom -UK, NY 12203 (USA) Nickel Alloy 2.4375 (monel K500) Seamless Steel /Plate
Dammam -KSA, Poland, UK, Philippines Corrosion Resistant Vessel Monel Alloy Bimetallic Clad Plate K500
Qatar, Singapore, Europe, Malaysia Nickel Alloy Monel K500 (UNS N05500) Plate
 Czechia, Japan, Malaysia, Jakarta, Thailand High Hardness DIN 2.4375 Monel K500 Nickel Based Alloy Plate for Sea Water Pump Shafts
Bangladesh, Malaysia, Colombia, China Nickel Copper Alloy Monel K500 Plate
South Africa, Taiwan, Philippines, Kuwait Monel K500/2.4375 Nickel Plate
 Bahrain, South Korea, Malaysia, Singapore Alloy Monel K500 (N05500 2.4375) Plate with High Quality
Philippines, Indonesia, Belgium, UK Heat-Resisting Monel K500/N05500 Stainless Steel Plate
Oman, France, Thailand, Hong Kong Monel K-500 K500 Plates/Sheets/Coils/Strips (UNS N05500, 2.4375, Alloy K-500 K500, NiCu30Al, NA18)
 Malaysia, Germany, Turkey N05500/Monel K500 Excellent Quality Cold Rolled Stainless Steel Sheet
Dubai,  USA, Finland, Malaysia Monel K500 Alloys Stainless Steel Sheet Corrosion Resistance Alloy Steel Sheet
UK, Saudi Arabia (KSA), Brazil, Spain Nickel Based Alloy Monel K-500 Iron Nickel Steel Strip Coil Sheet Plate
UAE, South Africa, Singapore, Europe 1219X2438X4.8mm, Monel k500 ASTM B127 CuNi Alloy Sheet Steel Plate

 

View latest price per kg & ready sizes of Monel Grade K500 Perforated Sheet and Chequered Plate Ex Mumbai

 

Features of Din 2.4375 Plate
  • Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
  • Non-magnetic alloy
  • Excellent resistance to high velocity sea water
  • Excellent mechanical properties from sub-zero temperatures up to about 480C
  • Resistant to a sour-gas environment

 

Ready Stock of Alloy Monel K500 Plate
Types of Monel K500 Plate we stock:
K500 Monel Plates UNS N05500 Rolling Plates
Din 2.4375 Chequer Plates Nickel Alloy K500 Tread Plates
UNS N05500 Monel K500 Cold Rolled Plates Alloy K500 Bbq Plates
Alloy K500 Hot Rolled Plates ASTM B127 Alloy K500 Perforated Plates
Alloy K500 Monel Clad Plates UNS N05500 Tisco Plates
ASTM B127 Alloy K500 Chequered Plates Alloy K500 Quarto Plates
Alloy K500 Embossed Plates k500 alloy Plasma Cutting Plates
Din 2.4375 Plates Brushed Finish Monel K500 Superalloy Hot Rolled Sheet
Alloy Monel K500 Plates Mill Finish Din 2.4375 Thin Plates
ASTM B127 Alloy K500 Plates 2b Finish Alloy K500 Monel Diamond Plates
Nickel Alloy K500 Plates Mirror Finish Alloy K500 Chequered Plates
UNS N05500 Checker Plates Din 2.4375 Polished Plates
Alloy K500 Custom Cut Plates Alloy K500 Sheet
Alloy K500 10mm Plates Alloy K500 Cold Rolled Sheet
400 Superalloy 1/4 Inch Plates 2.4375 Perforated Sheet
2.4375 Checkered Plates ASTM B127 Alloy K500 Laser Cut Plates

 

buy UNS N05500 Hot Rolled Plate and Cold Rolled Plate at low price, view material composition