Inconel 625 Plate

 

 

 

Inconel 625 Plate

 

inconel 625 Plate specification
Range 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Standard ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443, UNS N06625 / Werkstoff Nr. 2.4856
Type Sheet, Plates, Flat, Strips, Profile, Blank ,Circle, Ring etc.
Length Single Random, Double Random & Cut Length
End Plain End, Bevelled End, Threaded
Grade Inconel 625 Plates – UNS N06625

 

ASTM B443 Alloy 625 Plate melting range
ASTM B443 Alloy 625 Plate melting range
2350 - 2460°F (1280 - 1350°C)

 

Weight per Unit of AMS 5599 Alloy 625 Inconel Plate

Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Alloy 625 Plate Features
  • Salt, fresh water and alkaline chemical resistance
  • Chloride stress resistance
  • Stability during welding
  • Heat and cold resistance
  • Corrosion cracking resistance
  • Scaling and oxidization resistance

 

Difference between Inconel 625 Plate, Sheet, & Foil
  • Thickness greater than 6.35 mm is called a Inconel 625 Plate.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Inconel 625 Sheet.
  • Thickness less than 0.15mm is called a Inconel 625 Foil.

 

inconel 625 Plate Equivalent Grades
STANDARD WERKSTOFF NR. UNS JIS AFNOR BS GOST EN OR
Inconel 625 2.4856 N06625 NCF 625 NC22DNB4M NA 21 ХН75МБТЮ NiCr22Mo9Nb ЭИ602

 

inconel 625 Plate Chemical Composition
  Ni Cr Fe Mo Nb+Ta C Mn Si Ph S Al Ti Co
Min  Bal 20 - 8 3.15 - - - - - - - -
Max - 23 5 10 4.15 0.10 0.50 0.50 0.015 0.015 0.40 0.40 1.0

 

inconel 625 Plate Mechanical Properties
0.2% Proof Stress Tensile Strength Elongation Reduction of area Hardness
MPA MPA % % HRB
Min Min Min Min Min
414 827 30 40 145

 

inconel 625 plate Physical Properties

Property

Metric

Imperial

Density

8.44 g/cm3

0.305 lb/in3

Melting point

1350 °C

2460 °F

Co-Efficient of Expansion

12.8 µm/m.°C

(20-100°C)

7.1×10-6 in/in.°F

(70-212°F)

Modulus of rigidity

79 kN/mm2

11458 ksi

Modulus of elasticity

205.8 kN/mm2

29849 ksi