oldest Astm B444 Nickel Alloy 625 Seamless and UNS N06625 Welded Pipe supplier in india, find updated inconel pipe price

Inconel 625 Pipe

UNS N06625 Welded Pipe

Alloy 625 Seamless Pipe
inconel pipe suppliers used for heat exchangers and gas turbine , check DIN 2.4856 Clad and Hexagonal Pipe weight calculator/ schedule chart/ pressure rating.
The ASTM B444 listed Inconel Alloy 625 Round Pipe, like the ASME SB 517 welded Inconel 625 Pipe, must meet not only the chemical composition specifications, but also the mechanical property specifications.The Inconel 625 stainless steel pipe is almost impervious to assault in mild conditions such as the atmosphere, acidic salts, fresh water, and sea water, as well as in the presence of alkaline materials. The combination of nickel and chromium in the Alloy 625 Clad Pipe proves to be very useful in a more extreme corrosive environment situation. For example, Inconel 625 seamless pipe is considered to be very immune in aqueous mediums such as oxidising chemicals.
The properties of this specific defined inconel 625 EFW Pipe are based on the heat treatment used and the measurements, which involve the small diameter and light walled tubing. According to the ASTM B444 specification, each Inconel DIN NR. 2.4856 pipe or tube must be hydrostatically checked. Furthermore, the Nickel Alloy 625 Hollow Pipe must adhere to the permissible fibre stress while also being tested using a non-destructive electric test as specified by the specification.
Inconel 625 pipe is available in different materials ASTM B444 Inconel 625 Pipe, 625 Alloy Square Pipe, DIN 2.4856 Erw Pipe etc.Compare our prices with Inconel Pipe suppliers in India and contact us for any product/order related queries.
Description | Price list of Inconel 625 Pipe in India |
---|---|
Inconel 625 Alloy Pipe Cold Drawing Bright Surface | US $ 1500-1800 / Ton |
Manufacturer Special Nickel Alloy Inconel 625 Pipe Price Per Kg | US $ 47-56 / kg |
Nickel Based Alloy Seamless Pipe Inconel 625 | US $ 35000-60000 / Ton |
N06625 Inconel 625 Pipe | US $ 20-70 / kg |
Nickel Alloy Inconel 625 Pipe (UNS N06625, inconel625 2.4663) | US $ 2400-2600 / Ton |
Uns6625 Inconel 625 Seamless Pipe | US $ 30-60 / kg |
Fluid Seamless Alloy Steel Pipe Inconel 625 | US $ 10-20 / kg |
Inconel 625 Stainless Steel Seamless Pipe | US $ 500-20000 / Ton |
High Temperature Resistance Nickel Alloy Welded Tube Pipe Inconel 625 Price Per Kg | US $ 7.6-50 / kg |
If it's not too much trouble, note This is an estimated Cost of Inconel 625 pipe in India. Kindly don't hesitate to get in touch with us for Free Quote and most recent Alloy 625 pipe Price List in India. Additionally contrast our Price and other ASME SB444 Inconel 625 Pipe suppliers in India & China.
UNS N06625 Seamless Pipes are supplied according to ANSI/ ASME B36.19.
OD = Inconel 625 Pipe outside diameter
WT = Inconel 625 Pipe wall thickness
ASTM B444 Inconel 625 Pipe OD mm |
Pipe WT mm |
in. |
Sch |
Kg/m |
---|---|---|---|---|
13.72 |
1.65 |
1/4 |
10S |
0.50 |
13.72 |
2.24 |
1/4 |
40S |
0.64 |
13.72 |
3.02 |
1/4 |
80S |
0.81 |
17.15 |
1.65 |
3/8 |
10S |
0.64 |
17.15 |
2.31 |
3/8 |
40S |
0.86 |
17.15 |
3.20 |
3/8 |
80S |
1.12 |
21.34 |
2.11 |
1/2 |
10S |
1.02 |
21.34 |
2.77 |
1/2 |
40S |
1.29 |
21.34 |
3.73 |
1/2 |
80S |
1.65 |
26.67 |
2.11 |
3/4 |
10S |
1.30 |
26.67 |
2.87 |
3/4 |
40S |
1.71 |
26.67 |
3.91 |
3/4 |
80S |
2.23 |
33.40 |
2.77 |
1 |
10S |
2.13 |
33.40 |
3.38 |
1 |
40S |
2.54 |
33.40 |
4.55 |
1 |
80S |
3.29 |
33.40 |
6.352) |
1 |
160 |
4.30 |
42.16 |
2.77 |
1¼ |
10S |
2.73 |
42.16 |
3.56 |
1¼ |
40S |
3.44 |
42.16 |
4.85 |
1¼ |
80S |
4.53 |
42.16 |
6.352) |
1¼ |
160 |
5.69 |
48.26 |
2.77 |
1½ |
10S |
3.16 |
48.26 |
3.68 |
1½ |
40S |
4.11 |
48.26 |
5.08 |
1½ |
80S |
5.49 |
60.33 |
2.77 |
2 |
10S |
3.99 |
60.33 |
3.91 |
2 |
40S |
5.52 |
60.33 |
5.54 |
2 |
80S |
7.60 |
60.33 |
8.742) |
2 |
160 |
11.29 |
73.03 |
3.05 |
2½ |
10S |
5.35 |
73.03 |
5.16 |
2½ |
40S |
8.77 |
73.03 |
7.01 |
2½ |
80S |
11.59 |
88.90 |
3.05 |
3 |
10S |
6.56 |
88.90 |
5.49 |
3 |
40S |
11.47 |
88.90 |
7.62 |
3 |
80S |
15.51 |
88.90 |
11.132) |
3 |
160 |
21.67 |
101.60 |
3.05 |
3½ |
10S |
7.53 |
101.60 |
5.74 |
3½ |
40S |
13.78 |
101.60 |
8.08 |
3½ |
80S |
18.92 |
114.30 |
3.05 |
4 |
10S |
8.50 |
114.30 |
6.02 |
4 |
40S |
16.32 |
114.30 |
8.56 |
4 |
80S |
22.67 |
114.30 |
13.492) |
4 |
160 |
34.05 |
141.30 |
6.55 |
5 |
40S |
22.10 |
141.30 |
9.53 |
5 |
80S |
31.44 |
141.30 |
15.882) |
5 |
160 |
49.87 |
168.28 |
3.4 |
6 |
10S |
14.04 |
168.28 |
7.11 |
6 |
40S |
28.69 |
168.28 |
10.97 |
6 |
80S |
43.21 |
168.28 |
14.27 |
6 |
120 |
54.75 |
168.28 |
18.262) |
6 |
160 |
68.59 |
219.08 |
8.18 |
8 |
40S |
43.20 |
219.08 |
12.7 |
8 |
80S |
65.63 |
219.08 |
18.23 |
8 |
120 |
91.30 |
219.08 |
23.012) |
8 |
160 |
112.97 |
prime quality ISO certified Inconel 625 Pipe suppliers at low price.
ASTM Specification | ASTM B444 /ASME SB 444, ASTM B829, ASTM B751, ASTM B705, ASTM B775, AMS 5581, ASTM B704 |
---|---|
International Specifications | WERKSTOFF Nr 2.4856, VdTüV 499, ISO 6207, DIN 17751, BS 3074NA21, |
Standard | JIS, TOCT, GB, AMS, EN, ASTM, AISI, SAE, ASME, DS, NF, DTD, DIN |
625 Inconel Welded Pipe Size | 5.0 - 1219.2 mm |
WERKSTOFF NR. 2.4856 Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
Inconel 625 EFW Pipe size | 5.0 - 1219.2 mm |
Pipe Schedule | SCH5, SCH140, SCH80, XS, SCH10, SCH10S, SCH80, XXS, SCH120, SCH60, SCH30, STD, SCH20, SCH40S, SCH160, SCH40 |
Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
Finish | BA (Bright & Annealed), Polished, AP (Annealed & Pickled), NO.1, MF, 2B, NO.4, HL, BA, Mirror finish, 8K etc |
Length | Single Random, Standard & Cut length , Double Random Pipe |
Form | Inconel 625 Pipe are available in form of Square, Round, Rectangular, Hollow, Coiled, Hydraulic, Straight Pipes, Pan Cake Coils, “U” Shape etc. |
End of Alloy 625 Pipe | Beveled End, Plain End, Screwed ends, Treaded Pipe |
Type of 625 Alloy Pipe | ERW/ Seamless / Welded / EFW / CDW / Fabricated /CEW/ DOM Inconel 625 Pipe |
Application of Inconel 625 Pipe | Oil Pipe, Dairy Pipe, Boiler Pipe, Fluid Pipe, Gas Pipe for Chemical Industry |
Marking on AMS 5581 Pipe | All ASTM B444 Inconel 625 Pipes are marked as follows: Grade, Standard, Thickness, OD, Heat No. (Or according to the customer’s request.), Length |
Specialize in | Large Diameter Inconel 625 Pipe |
Value Added Service | Polish (Electro & Commercial) Annealed & Pickled Bending, Draw & Expansion as per required Size & Length, Machining Etc. |
manufacturing Technique of UNS N06625 Pipe | hot drawn, Cold drawn, solid solution, bright annealed, hot extruding |
Test Certificate of ASTM B444 Inconel 625 Pipe |
|
Our stockyard of Nickel Alloy 625 Pipe | Pimpri-Chinchwad, Gimhae-si, New Delhi, Abu Dhabi, Port-of-Spain, Gujarat, Lagos, Riyadh, Rajkot, Noida, Bangalore, Courbevoie, Bengaluru, Gurgaon, Nagpur,Indore, Kuwait, Manama, Ernakulam, London, India, Mumbai, Surat, Hyderabad, Karachi, Ludhiana, Montreal, Caracas, Kolkata, Santiago, Muscat, Kanpur, Ahvaz, Ranchi, Perth, Jamshedpur, Ahmedabad, Ankara, Istanbul, Janeiro, Tau, Bogota, Tehran, Vadodara, Howrah, Khobar, Dammam, Thiruvananthapuram, Calgary, Chennai, Sydney, Coimbatore, Melbourne, Mexico, Baroda |
Manufacturers of Inconel Pipe |
|
Material Test Certificates (MTC) |
|
Inconel 625 Pipe Dimension ANSI/ ASME B36.10, B36.19, B2.1 We can also thread, cut and groove UNS N06625 Pipe to meet your specifications. |
Types | Out diameter | Wall thickness | Length |
---|---|---|---|
NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
Inconel 625 Seamless Pipe (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
Inconel 625 Welded Pipe (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
Call for Material test certificate and sample of Inconel 625 Hollow/Round Pipe, view specification/size/dimensions
ASTM B444 Gr.625 Pipe materials are provided in two conditions: Grade 1 comprises annealed Inconel 625 pipe and Grade 2 of the stated pipes are supplied in a solution annealed state. The strong nickel content of UNS N06625 Welded Pipe alloying allows the metal to survive a broad range of extreme corrosive media containing conditions.
HS Code | Description |
---|---|
73049000 | NEW PIPE, 1-1/4 S/40, SB-444 GR.1 SEAMLESS, ANNEALED,INCONEL 625 [3 NOS] |
75071200 | NICKEL ALLOY PIPES INCONEL 625 |
75071200 | (NICKEL ALLOY PIPE) PIPE INCONEL 625 SS- NC22DNB-HYPERTREMPE -DE 25.4 X EP 0.71 LG COURANTE T063H2540X071/COU |
75071200 | (NICKEL ALLOY PIPE) PIPE INCONEL 625 SS- NC22DNB - HYPERTREMPE - DE 25.4 X EP 0.89 - LG COURANTE T063H2540X08 |
75071200 | INCONEL 625 SMLS PIPE SIZE:25NBxSCH.XXS,CONFIRMING TO ASTM B-444 UNS N06625,GRADE 1 (6.08 MTR) (NICKEL ALLOY PIPES) |
90318000 | 0600 7804 EXTENSION PIPE TO +1200 C, INCONEL 625 LENGTH PROBE SHAFT 1m, PROBE SHAFT 12 mm, CONNECTION SCREW SOCKET 20 mm |
90318000 | 0600 7804 EXTENSION PIPE TO +1200 C, INCONEL 625 LENGTH PROBE SHAFT 1m, PROBE SHAFT 12 mm, CONNECTION SCREW SOCKET 20 mm |
75071200 | NICKEL ALLOY DEFECTIVE WELDED PIPE GRADE INCONEL 625 |
75071200 | NICKEL ALLOY DEFECTIVE SEAMLESS PIPE GRADE INCONEL 625 |
75071200 | NICKEL ALLOY PIPES - INCONEL 625 (UNSN06625) |
75071200 | INCONEL ALLOY 625 (UNS N06625) SEAMLESS PIPE CONF.TO SPECN. ASME SB444 GR.2, 8NB SCH 80 (3.010 M) |
1/8" IPS(.405"O. D.) |
3 1/2" IPS( 4.000"O. D.) |
---|---|
SCH 40, 80 |
SCH 10, 40, 80, 160, XXH |
1/4" IPS(.540"O. D.) |
4" IPS(4.500"O. D.) |
SCH 10, 40, 80 |
SCH 10, 40, 80, 160, XXH |
3/8" IPS(.675"O. D.) |
5" IPS( 5.563"O. D.) |
SCH 10, 40, 80 |
SCH 10, 40, 80, 160, XXH |
1/2" IPS(.840"O. D.) |
6" IPS(6.625"O. D.) |
SCH 5, 10, 40, 80, 160, XXH |
SCH 5, 10, 40, 80, 120, 160, XXH |
3/4" IPS(1.050"O. D.) |
8 ” IPS(8.625"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH 5, 10, 40, 80, 120, 160, XXH |
1" IPS:(1.315′O. D.) |
10" IPS(10.750"O. D.) |
SCH 5, 10, 40, 80, 160, XXH |
SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
1-1/4" IPS(1.660"O. D.) |
12" IPS(12.750"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
1-1/2" IPS(1.900"O. D.) |
14" IPS(14.000"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH10 (.188), SCH40 (.375) |
2" IPS(2.375"O. D.) |
16" IPS(16.000"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH10(.188), SCH40(.375) |
2 1/2" IPS(2.875"O. D.) |
18" IPS (18.000"O. D.) |
SCH 10, 40, 80, 160, XXH |
SCH-40 (.375) |
3" IPS( 3.500"O. D.) |
|
SCH 5, 10, 40, 80, 160, XXH |
As Oldest Inconel 625 Pipe suppliers offer these DIN 2.4856 Pipe in a wide range of sizes, from thin wall to thick wall Inconel 625 Pipe in seamless or welded forms
Buy Astm B444 Gr.625 Pipe according to international Standard at lowest possible price
for Process piping American standard (ASME B31.3 : 2012)
Selected wall tolerance: ±10%
Wall Thickness and Outside Diameter (Mm)
Size mm |
Grade |
Maximum internal pressure, ksi
|
||||||||
---|---|---|---|---|---|---|---|---|---|---|
100°F |
200°F |
300°F |
400°F |
500°F |
600°F |
700°F |
||||
1.59 x 0.36 |
N06625 |
19.21 |
19.21 |
19.02 |
18.83 |
18.54 |
18.15 |
17.77 |
||
3 x 0.5 |
N06625 |
940 |
940 |
930 |
921 |
907 |
888 |
869 |
||
6 x1 |
N06625 |
940 |
940 |
930 |
921 |
907 |
888 |
869 |
||
8x1 |
N06625 |
681 |
681 |
675 |
668 |
658 |
644 |
630 |
||
8x2 |
N06625 |
1476 |
1476 |
1462 |
1447 |
1425 |
1395 |
1366 |
||
10x1 |
N06625 |
534 |
534 |
529 |
524 |
516 |
505 |
494 |
||
12x1 |
N06625 |
440 |
440 |
435 |
431 |
424 |
415 |
407 |
||
16x1 |
N06625 |
324 |
324 |
321 |
318 |
313 |
307 |
300 |
in pressure vessels and boilers it is important to consider standards For Inconel 625 pipe like:
- Machine Directive 2006/42/EG for European applications
- Pressure Equipment Directive 97/23/PG (PED)
- American standard ASME Boiler and Pressure Vessel Code Section VIII Division 1 and 2.
Pipe Size (in) |
Diameter (in) MM |
Nominal Thickness (in) MM |
Transverse Areas (in2) MM2 |
Length of Pipe (ft per sq. foot of surface) |
Volume (ft3/ft) |
Weight | Number of Threads per inch of Screw | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
External | Internal | External | Internal | Steel | External Surface (ft) |
Internal Surface (ft) |
(lb/ft) | (kg/m) | ||||
1/8 | 0.405 | 0.27 | 0.07 | 0.13 | 0.06 | 0.07 | 9.43 | 14.20 | 0.0004 | 0.24 | 0.36 | 27 |
¼ | 0.540 | 0.36 | 0.09 | 0.23 | 0.10 | 0.13 | 7.07 | 10.49 | 0.0007 | 0.42 | 0.63 | 18 |
3/8 | 0.675 | 0.49 | 0.09 | 0.36 | 0.19 | 0.17 | 5.66 | 7.75 | 0.0013 | 0.57 | 0.84 | 18 |
½ | 0.840 | 0.62 | 0.11 | 0.55 | 0.30 | 0.25 | 4.55 | 6.14 | 0.0021 | 0.85 | 1.26 | 14 |
¾ | 1.050 | 0.82 | 0.11 | 0.87 | 0.53 | 0.33 | 3.64 | 4.64 | 0.0037 | 1.13 | 1.68 | 14 |
1 | 1.315 | 1.05 | 0.13 | 1.36 | 0.86 | 0.49 | 2.90 | 3.64 | 0.0060 | 1.68 | 2.50 | 11 ½ |
1 ¼ | 1.660 | 1.38 | 0.14 | 2.16 | 1.50 | 0.67 | 2.30 | 2.77 | 0.0104 | 2.27 | 3.38 | 11 ½ |
1 ½ | 1.900 | 1.61 | 0.15 | 2.84 | 2.04 | 0.80 | 2.01 | 2.37 | 0.0141 | 2.72 | 4.04 | 11 ½ |
2 | 2.375 | 2.07 | 0.15 | 4.43 | 3.36 | 1.08 | 1.61 | 1.85 | 0.0233 | 3.65 | 5.43 | 11 ½ |
2 ½ | 2.875 | 2.47 | 0.20 | 6.49 | 4.79 | 1.70 | 1.33 | 1.55 | 0.0333 | 5.79 | 8.62 | 8 |
3 | 3.500 | 3.07 | 0.22 | 9.62 | 7.39 | 2.23 | 1.09 | 1.25 | 0.0513 | 7.58 | 11.27 | 8 |
3 ½ | 4.000 | 3.55 | 0.23 | 12.56 | 9.89 | 2.68 | 0.95 | 1.08 | 0.0687 | 9.11 | 13.56 | 8 |
4 | 4.500 | 4.03 | 0.24 | 15.90 | 12.73 | 3.17 | 0.85 | 0.95 | 0.0884 | 10.79 | 16.06 | 8 |
5 | 5.563 | 5.05 | 0.26 | 24.30 | 20.00 | 4.30 | 0.69 | 0.76 | 0.1389 | 14.61 | 21.74 | 8 |
6 | 6.625 | 6.07 | 0.28 | 34.47 | 28.89 | 5.58 | 0.58 | 0.63 | 0.2006 | 18.97 | 28.23 | 8 |
8 | 8.625 | 7.98 | 0.32 | 58.42 | 50.02 | 8.40 | 0.44 | 0.48 | 0.3552 | 28.55 | 42.49 | 8 |
10 | 10.750 | 10.02 | 0.37 | 90.76 | 78.85 | 11.90 | 0.36 | 0.38 | 0.5476 | 40.48 | 60.24 | 8 |
12 | 12.750 | 11.94 | 0.41 | 127.64 | 111.90 | 15.74 | 0.30 | 0.32 | 0.7763 | 53.60 | 79.77 | 8 |
14 | 14.000 | 13.13 | 0.44 | 153.94 | 135.30 | 18.64 | 0.27 | 0.28 | 0.9354 | 63.00 | 93.75 | 8 |
16 | 16.000 | 15.00 | 0.50 | 201.05 | 176.70 | 24.35 | 0.24 | 0.25 | 1.2230 | 78.00 | 116.08 | 8 |
18 | 18.000 | 16.88 | 0.56 | 254.85 | 224.00 | 30.85 | 0.21 | 0.23 | 1.5550 | 105.00 | 156.26 | 8 |
20 | 20.000 | 18.81 | 0.59 | 314.15 | 278.00 | 36.15 | 0.19 | 0.20 | 1.9260 | 123.00 | 183.05 | 8 |
24 | 24.000 | 22.63 | 0.69 | 452.40 | 402.10 | 50.30 | 0.16 | 0.17 | 2.7930 | 171.00 | 254.48 | 8 |
NPS |
Outside Diameter |
Wall Thickness |
Weight |
Weight |
|||
in |
mm |
in |
mm |
Sched |
kg/Mtr |
Lb/ft |
|
1/2″ |
0.840 |
21 |
0.109 |
2.769 |
40 STD |
1.268 |
0.851 |
0.147 |
3.734 |
80 STD |
1.621 |
1.088 |
|||
3/4″ |
1.050 |
27 |
0.113 |
2.870 |
40 STD |
1.684 |
1.131 |
0.154 |
3.912 |
80 STD |
2.195 |
1.474 |
|||
1″ |
1.315 |
33 |
0.133 |
3.378 |
40 STD |
2.501 |
1.679 |
0.179 |
4.547 |
80 STD |
3.325 |
2.172 |
|||
1 1/4″ |
1.660 |
42 |
0.140 |
3.556 |
40 STD |
3.385 |
2.273 |
0.191 |
4.851 |
80 STD |
4.464 |
2.997 |
|||
1 1/2″ |
1.900 |
48 |
0.145 |
3.683 |
40 STD |
4.048 |
2.718 |
0.200 |
5.080 |
80 STD |
5.409 |
3.361 |
|||
2″ |
2.375 |
60 |
0.154 |
3.912 |
40 STD |
5.441 |
3.653 |
0.218 |
5.537 |
80 STD |
7.480 |
5.022 |
|||
2 1/2″ |
2.875 |
73 |
0.203 |
5.516 |
40 STD |
8.629 |
5.793 |
0.276 |
7.010 |
80 STD |
11.411 |
7.661 |
|||
3″ |
3.500 |
89 |
0.216 |
5.486 |
40 STD |
11.284 |
7.576 |
0.300 |
7.620 |
80 STD |
15.272 |
10.253 |
|||
4″ |
4.500 |
114 |
0.237 |
6.020 |
16.073 |
10.790 |
|
0.337 |
8.560 |
22.318 |
14.983 |
||||
6″ |
6.625 |
168 |
0.188 |
4.775 |
19.252 |
12.924 |
|
0.203 |
5.516 |
20.739 |
13.923 |
||||
0.219 |
5.563 |
22.318 |
14.983 |
||||
0.250 |
6.350 |
25.354 |
17.021 |
||||
0.280 |
7.112 |
40 STD |
58.263 |
18.974 |
|||
0.312 |
7.925 |
31.334 |
21.036 |
||||
0.375 |
9.525 |
37.285 |
25.031 |
||||
0.432 |
10.973 |
80 XHY |
42.561 |
28.573 |
|||
0.500 |
12.700 |
48.719 |
32.708 |
||||
8″ |
8.625 |
219 |
0.188 |
4.775 |
25.233 |
16.940 |
|
0.203 |
5.156 |
27.198 |
18.259 |
||||
0.219 |
5.563 |
29.286 |
19.661 |
||||
0.250 |
6.350 |
20 |
33.308 |
22.361 |
|||
0.277 |
7.036 |
30 |
36.786 |
24.696 |
|||
0.322 |
8.179 |
40 |
42.352 |
28.554 |
|||
0.375 |
9.525 |
49.216 |
33.041 |
||||
0.406 |
10.312 |
60 |
53.085 |
35.638 |
|||
0.500 |
12.700 |
80 XHY |
64.627 |
43.388 |
|||
10″ |
10.750 |
273 |
0.188 |
4.775 |
31.588 |
21.207 |
|
0.219 |
5.563 |
36.689 |
24.631 |
||||
0.250 |
6.350 |
20 |
41.759 |
28.035 |
|||
0.307 |
7.798 |
30 |
51.002 |
34.240 |
|||
0.344 |
8.738 |
56.946 |
38.231 |
||||
0.365 |
9.271 |
40 STD |
63.301 |
40.483 |
|||
0.438 |
11.125 |
71.852 |
48.238 |
||||
0.500 |
12.700 |
60 XHY |
81.530 |
54.735 |
|||
0.594 |
15.088 |
80 |
95.969 |
64.429 |
|||
12″ |
12.750 |
324 |
0.188 |
4.775 |
37.570 |
25.222 |
|
0.219 |
5.563 |
43.657 |
29.309 |
||||
0.250 |
6.350 |
49.713 |
33.375 |
||||
0.281 |
7.137 |
55.739 |
37.420 |
||||
0.312 |
7.925 |
61.735 |
41.445 |
||||
0.375 |
9.525 |
73.824 |
49.562 |
||||
0.406 |
10.312 |
79.727 |
53.525 |
||||
0.500 |
12.700 |
97.438 |
65.415 |
||||
0.562 |
14.275 |
108.966 |
73.154 |
||||
14″ |
14.000 |
356 |
0.188 |
4.775 |
41.308 |
27.732 |
|
0.219 |
5.563 |
48.012 |
32.233 |
||||
0.250 |
6.350 |
20 |
54.685 |
36.713 |
|||
0.281 |
7.137 |
61.327 |
41.172 |
||||
0.312 |
7.925 |
67.939 |
45.611 |
||||
0.375 |
9.525 |
STD |
81.281 |
54.568 |
|||
0.438 |
11.125 |
40 |
94.498 |
63.441 |
|||
0.500 |
12.700 |
XHY |
107.381 |
72.090 |
|||
0.625 | 15.875 |
132.983 |
89.278 |
||||
16” |
16.000 |
406 |
0.188 |
4.775 |
47.290 |
21.748 |
|
0.219 |
5.563 |
54.980 |
36.910 |
||||
0.250 |
6.350 |
10 |
62.639 |
42.053 |
|||
0.281 |
7.137 |
70.268 |
47.174 |
||||
0.312 |
7.925 |
20 |
77.866 |
52.275 |
|||
0.344 |
8.738 |
85.677 |
57.519 |
||||
0.375 |
9.525 |
30 STD |
93.213 |
62.578 |
|||
0.438 |
11.125 |
108.433 |
72.797 |
||||
0.500 |
12.700 |
40 XHY |
123.289 |
82.770 |
|||
18″ |
18.000 |
457 |
0.219 |
5.563 |
61.948 |
41.588 |
|
0.250 |
6.350 |
70.593 |
47.393 |
||||
0.281 |
7.137 |
79.208 |
53.176 |
||||
0.312 |
7.925 |
20 |
87.792 |
58.939 |
|||
0.375 |
9.525 |
STD |
105.144 |
70.588 |
|||
0.438 |
11.125 |
30 |
122.369 |
82.152 |
|||
0.500 |
12.700 |
XHY |
139.198 |
93.450 |
|||
0.562 |
14.275 |
40 |
155.904 |
104.666 |
|||
0.625 |
15.875 |
172.754 |
115.978 |
||||
20″ |
20.000 |
508 |
0.250 |
6.350 |
78.547 |
52.733 |
|
0.282 |
7.163 |
88.458 |
59.386 |
||||
0.312 |
7.925 |
97.719 |
65.604 |
||||
0.375 |
9.525 |
20 STD |
117.075 |
78.598 |
|||
0.438 |
11.125 |
136.305 |
91.508 |
||||
0.500 |
12.700 |
30 XHY |
155.106 |
104.130 |
|||
0.594 |
15.088 |
40 |
183.378 |
123.110 |
|||
0.625 |
15.875 |
192.640 |
129.328 |
||||
0.688 |
17.475 |
211.368 |
141.901 |
||||
24″ |
24.000 |
610 |
0.250 |
6.350 |
94.456 |
63.413 |
|
0.281 |
7.137 |
106.029 |
71.183 |
||||
0.312 |
7.925 |
117.573 |
18.932 |
||||
0.375 |
9.525 |
20 STD |
140.938 |
64.618 |
|||
0.438 |
11.125 |
164.176 |
110.219 |
||||
0.500 |
12.700 |
XHY |
186.923 |
125.490 |
|||
0.625 |
15.875 |
232.410 |
156.028 |
||||
0.688 |
17.475 |
40 |
255.148 |
171.293 |
|||
0.750 |
19.050 |
277.401 |
186.233 |
||||
30″ |
30.000 |
762 |
0.250 |
6.350 |
118.318 |
79.433 |
|
0.281 |
7.137 |
132.851 |
89.189 |
||||
0.312 |
7.925 |
10 |
147.353 |
98.925 |
|||
0.375 |
9.525 |
STD |
176.731 |
118.648 |
|||
0.438 |
11.125 |
205.983 |
138.286 |
||||
0.500 |
12.700 |
20 XHY |
234.647 |
157.530 |
|||
0.625 |
15.875 |
30 |
292.066 |
196.078 |
|||
0.688 |
17.475 |
320.817 |
215.380 |
||||
0.750 |
19.050 |
348.988 |
234.293 |
||||
36″ |
36.000 |
914 |
0.250 |
6.350 |
142.180 |
95.453 |
|
0.281 |
7.137 |
159.672 |
107.196 |
||||
0.312 |
7.925 |
10 |
177.133 |
118.918 |
|||
0.375 |
9.525 |
STD |
215.525 |
142.678 |
|||
0.438 |
11.125 |
247.790 |
166.353 |
||||
0.500 |
12.700 |
20 XHY |
282.372 |
198.570 |
|||
0.625 |
15.875 |
351.723 |
236.128 |
||||
0.688 |
17.475 |
386.487 |
259.467 |
||||
0.750 |
19.050 |
420.576 |
282.353 |
||||
42″ |
42.000 |
1067 |
0.312 |
7.925 |
206.914 |
138.911 |
|
0.375 |
9.525 |
STD |
248.319 |
166.708 |
|||
0.500 |
12.700 |
XHY |
33.097 |
221.610 |
|||
0.750 |
19.050 |
492.163 |
330.413 |
||||
48″ |
48.000 |
1219 |
0.375 |
9.525 |
STD |
284.112 |
190.738 |
0.438 |
11.125 |
331.404 |
222.487 |
||||
0.500 |
12.700 |
XHY |
377.822 |
253.650 |
|||
0.750 |
19.050 |
563.750 |
378.473 |
||||
0.875 |
22.225 |
655.969 |
440.383 |
Inconel
Inconel is a family of austenitic nickel-chromium-based superalloys.
Composition of Inconel
Inconel | Element (% by mass) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ni | Cr | Fe | Mo | Nb | Co | Mn | Cu | Al | Ti | Si | C | S | P | B | |
601 | 72.0 | 14.0–17.0 | 6.0–10.0 | 1.0 | 0.5 | 0.5 | 0.15 | 0.015 | |||||||
617 | 44.2–56.0 | 20.0–24.0 | 3.0 | 8.0–10.0 | 10.0–15.0 | 0.5 | 0.5 | 0.8–1.5 | 0.6 | 0.5 | 0.15 | 0.015 | 0.015 | 0.006 | |
601 | 58.0 | 20.0–23.0 | 5.0 | 8.0–10.0 | 3.15–4.15 | 1.0 | 0.5 | 0.4 | 0.4 | 0.5 | 0.1 | 0.015 | 0.015 | ||
690 | 59.5 | 30 | 9.2 | 0.35 | 0.01 | 0.02 | 0.35 | 0.019 | 0.003 | ||||||
718 | 50.0–55.0 | 17.0–21.0 | balance | 2.8–3.3 | 4.75–5.5 | 1.0 | 0.35 | 0.2–0.8 | 0.65–1.15 | 0.3 | 0.35 | 0.08 | 0.015 | 0.015 | 0.006 |
X-750 | 70.0 | 14.0–17.0 | 5.0–9.0 | 0.7–1.2 | 1.0 | 1.0 | 0.5 | 0.4–1.0 | 2.25–2.75 | 0.5 | 0.08 | 0.01 |
incoloy
Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies.
Compositions (percentages) of Incoloy
Alloy name | Balance metal |
Chro mium |
Alu minum |
Tita nium |
Carbon | Yttrium oxide | Copper | Man ganese |
Cobalt | Nickel | Phos phorus |
Silicon | Sulphur | Moly bdenum |
Nb +Ti |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
020 | Fe (~40%) | 20 | n/p | n/p | <0.07 | n/p | 3.5 | <2.0 | n/p | 35 | <0.045 | <1.0 | <0.035 | 2.5 | about 1 |
DS | Fe (~40%) | 18 | n/p | 0.2 | 0.1 | nil | 0.5 | 0.8-1.5 | 18 (Co+ Ni 38) |
18 (Co+ Ni 38) |
n/p | 2.3 | 0.03 | ||
MA956 | Fe (~75%) | 20 | 4.75 | 0.4 | <0.1 | 0.5 | <0.15 | <0.3 | <0.3 | <0.5 | <0.02 | n/p | n/p |
inconel 625 Pipe is a nickel-chromium composites which is used very surprising welding structures. inconel 625 Pipe is most normally used in systems where high heat tolerance is required. Welding Inconel can be or perhaps troublesome in light of the fact that the welds that are made tend to part. There are many compounds of Inconel that were especially made arrangements for use in welding like TIG.
- Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
- Packing List including net weight and gross weight, number of boxes, Marks and Numbers
- Test Certificates certifying NACE MR0103, NACE MR0175
- Heat Treatment Charts
- Guarantee Letter
- Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
- NABL approved Laboratory Test Reports
- Fumigation Certificates
- Quality Assurance Plan (QAP)
- Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
- Form A for the purposes of the Generalized System of Preferences (GSP)
- Material Traceability Records
- Commercial Invoice which includes HS Code
- Raw Material Test Reports
Alloy | Product form | Dimension |
---|---|---|
INCONEL 625 (61 Ni/22 Cr/9 Mo) | Pipe; seamless, annealed | 4.50 x 0.75 mm |
INCONEL 625 (61 Ni/22 Cr/9 Mo) | Pipe; seamless, pickled, annealed | 33.40 x 3.38 mm (1"nb sch40s) |
INCONEL 625 (61 Ni/22 Cr/9 Mo) | Pipe; welded, bright solution annealed | 60.33 x 2.77 mm (2"nb sch10s) |
INCONEL 625 (61 Ni/22 Cr/9 Mo) | Pipe; seamless, cold drawn, ground, annealed | 60.33 x 3.91 mm (2"nb Sch40s) |
Belgium, Dammam -KSA, Indonesia, Philippines | Nickel Alloy Pipe Inconel 625 |
Finland, Malaysia, USA, Bangladesh | Inconel 625 Seamless Pipe |
Malaysia, Czechia, Germany, Thailand | Inconel 625 Nickel Alloy Seamless Pipes |
Brazil, South Africa, Saudi Arabia (KSA), Kuwait | High Quality Inconel 625 Pipe |
Thailand, Qatar, France, Europe | Alloy Grade Inconel 625 Alloy Steel Pipes |
Singapore, Bahrain, South Africa | Seamless W. Nr 2.4856 Alloy Pipe Inconel 625 Good Work in Chloride |
UAE, Oman, Malaysia, Hong Kong | Inconel 625 /Alloy 625/2.4856/ Excellent Corrosion Resistance Stainless Steel Pipe |
Nigeria, Philippines, Australia, UK | Inconel 625 Stainless Steel Seamless Pipe |
Singapore, Chile, Italy, Iran | Nickel Alloy Welded Pipe for Heater Element Inconel 625 |
Dubai, Netherlands, Malaysia, Russia | Inconel 625 Nickel Based Alloy Pipe with High Quality |
Malaysia, United Arab Emirates (UAE), Turkey, Norway | Inconel 625 ASTM B444 Seamless Pipe |
UK, Egypt, Spain, Mexico | Nickle Alloy Inconel 625 Pipe |
Ellington -United States, UK, Canada, Poland | Nickle Alloy Inconel 625 Seamless Pipe |
UAE, United Kingdom -UK, Europe, Malaysia | Inconel 625 Alloy Steel Pipe |
- Motor racing exhaust systems
- Aerospace equipment
- Chimney Linings
- Nuclear waste reprocessing equipment
- Chemical Processing
- Jet Engine exhaust systems
- Sour gas production tubes
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
625 | Psi – 1,35,000 , MPa -930 | Psi – 75,000 , MPa – 517 | 42.5 | – | – |
Grade | C | Mn | Si | Fe | S | Cr2 | Al-Ti | Ni | |
625 | min. | – | – | – | – | – | 20.0 | – | 58.0 |
max. | 0.10 | 0.50 | 0.50 | 5.0 | 0.015 | 23.0 | 0.40 | – |
Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
BS | En | No | AFNOR | ||||
Inconel 625 | N06625 | NA 21 | NiCr22Mo9Nb | 2.4856 | NC22DNB4M | ХН75МБТЮ | NCF 625 |
Property |
Metric |
Imperial |
Density |
8.44 g/cm3 |
0.305 lb/in3 |
Melting point |
1350 °C |
2460 °F |
Co-Efficient of Expansion |
12.8 µm/m.°C (20-100°C) |
7.1×10-6 in/in.°F (70-212°F) |
Modulus of rigidity |
79 kN/mm2 |
11458 ksi |
Modulus of elasticity |
205.8 kN/mm2 |
29849 ksi |
ASTM B444 Inconel 625 Pipes | 4 inch Nickel WERKSTOFF NR. 2.4856 Pipes |
625 Inconel ERW Pipes | Schedule 5S Inconel Pipes |
Nickel WERKSTOFF NR. 2.4856 Seamless Pipes | 625 Inconel Thick Wall Pipes |
Nickel Alloy 625 Hollow Pipes | 625 Alloy Electropolished Pipes |
Nickel WERKSTOFF NR. 2.4856 Welded Pipes | ASME SB444 Inconel 625 Large Pipes |
Inconel SMLS Pipes | Alloy 625 UNS N06625 Polished Pipes |
Nickel Alloy 625 CDW Pipes | Cold Drawn 625 Inconel Seamless Pipes |
ASME SB444 Inconel 625 EFW Pipes | Schedule 40 Nickel Alloy 625 Pipes |
Alloy 625 UNS N06625 Round Pipes | Alloy 625 Exhaust Pipes |
Capillary ASTM B444 Inconel 625 Thin Pipes | High pressure UNS N06625 Pipes |
ASTM B444 625 Inconel Custom Pipes | ASTM B444 Inconel 625 Capillary Pipes |
625 Alloy Square Pipes | Inconel 625 Thin Wall Pipes |
Inconel 625 Bush Hex Pipes | 2.4856 Alloy 625 Clad Pipes |
Alloy 625 Rectangular Pipes | Small diameter Inconel 625 Pipes |
Inconel 625 Hexagonal Pipes | Nickel Alloy 625 Pipes material |
Nickel Alloy 625 Fabricated Pipes | ASTM B444 625 Inconel Annealed Pipes |
2.4856 Alloy 625 Beveled End Pipes | Nickel Alloy 625 Rectangle Pipes |
UNS N06625 Cold Drawn Pipes | Cold Drawn ASTM B444 Inconel 625 Welded Pipes |
Get Inconel 625 Efw Pipe Chemical Composition and yeild chart online, refer UNS N06625 Pipe Material Equivalent
- Positive Material Identification – PMI Testing
- Intergranular Corrosion (IGC) Test
- Flaring Test
- Micro and MacroTest
- Flattening Test
- Chemical Analysis – Spectro Analysis
- Hardness Test
- Pitting Resistance Test
- Mechanical Testing Such as Tensile of Area