Alloy 600 Seamless tube suppliers in india, check ASTM B516 UNS N06600 Welded Tubing Price

Inconel 600 Tube

Tubi Inconel 600

Inconel 600 Seamless Tube
See 600 Inconel exhaust Tube sizes, WERKSTOFF NR. 2.4816 Coiled Tubing available for online order, buy at dealer price in India
The ASTM B516 specification also specifies that the material, in this case, the welded 600 Inconel exhaust Tube, be cold worked. This cold working procedure is to be conducted on the inconel NCF 600 Tube on either the weld metal only or on the Alloy 600 ERW Tube in both the weld and base metal after the welding activity and prior to the final annealing treatment done on the inconel 600 tubing.
Inconel 600 tube suppliers also draw attention to ASTM B516 standard for the production of 600 Inconel Welded Tube . This nickel chromium iron-based ASTM B516 tube inconel 600 is intended for use in boiler, heat exchanger, and condenser tubes for applications including general corrosion resistance as well as low or high temperature facilities. The flat rolled alloy must be used to manufacture the ASTM B516 Inconel 600 Welded Tube.
The ASTM B516 required Inconel WERKSTOFF NR. 2.4816 Tubing is produced using an automated welding method. The welding process is carried out on an inconel 600 exhaust heat exchange without the use of a filler metal. Furthermore, according to the specification, the Inconel UNS N06600 Tubing must be supplied with the oxide extracted. Inconel alloy 600 tubing is recommended for high-temperature applications of corrosive media.
Inconel 600 Seamless Tubes is a nickel – chromium alloy with high temperature oxidation tolerance and resistance to chloride – ion tension – corrosion breaking, corrosion by high – purity water, and caustic corrosion.
| Description | Price list of Inconel 600 Tube in India |
|---|---|
| Inconel 600 Nickel Alloy Welded Electric Heating Tube | US $ 7.6-50 / kg |
| N06600 Inconel 600 Tube with ASTM Certificate | US $ 19.58-51.47 / kg |
| Inconel 600 Seamless Nickel Alloy Tube | US $ 20-30 / Meter |
| Nickel Based Alloy Seamless Tube (Inconel 600) | US $ 35000-60000 / Ton |
| Soft Magnetic Alloy Inconel 600 Tube | US $ 9.47-11.85 / kg |
| En 2.4816 Uns N06600 Nickel UNS N06600 Seamless Tube | US $ 800 / Ton |
| Bright Annealed Inconel 600 Nickel Tubes in Coils | US $ 0.8-1.6 / Meter |
| Inconel Seamless Alloy Tube Named Ncf 600 Nas 600 Nicrofer 7216 Large Sizes for High Temperature Application | US $ 50 / kg |
| Nickel Based Alloy Inconel 600 Tube | US $ 7.6-50 / kg |
If it's not too much trouble, note This is an estimated Price of Alloy 600 tube in India. Kindly don't hesitate to get in touch with us for most recent Inconel 600 tube Price List in India. Additionally contrast our Price and other ASME SB163 Inconel 600 tube suppliers in India & worldwided
ASTM B163 has a standard for Inconel as an alloy. The ASTM B163 Inconel 600 Tube specification includes seamless nickel and nickel alloys-based materials such as Inconel 600 tubes.
| Standards of Alloy 600 Tubing | ASTM B167, ASTM B517, AMS 5580, ASTM B829, ASTM B163, ASTM B775, ASTM B751, ASTM B516, |
|---|---|
| International Specification | DIN 17750, BS 3072-3076 (NA14), DIN 17742, AFNOR-NC 15 Fe, TÜV 305, WERKSTOFF Nr 2.4816, DIN 17754 |
| ASTM B516 Alloy 600 Welded Tube Size | 6.35 mm To 152 mm Outside Diameter |
| ASTM B163 Inconel 600 Seamless Tube Size | 3.35- 101.6 mm Outside Diameter |
| Inconel 600 tube wall thickness | 00.020" to 00.220", (as per client need) |
| WERKSTOFF NR. 2.4816 Tubing Bwg and Swg | 12 , 10 , 16, 14 , 20 , 18 Swg |
| NCF 600 Tube Length | Cut length, Double and Single Random Tube |
| Types of UNS N06600 Tubing | ERW, Seamless, Welded, Fabricated, EFW Tube / Tubing |
| Form | ‘ Hollow, U’ bent, LSAW, Hydraulic, Straight Tube, Boiler, Round, Tube Coil, Square, Rectangular Etc |
| Inconel 600 Tubing Finish | AP (Annealed & Pickled), Polished, MF, BA (Bright & Annealed) |
| Marking | All inconel 600 Tubing marking : Grade, Standard, Thickness, OD, Heat No., Length |
| Inconel 600 tube End | Beveled End, Plain End, Treaded Tube |
| Value Added Service | Machining, Polish ( Commercial & Electro), As per your need Draw & Expansion , Annealed & Pickled Bending Etc. |
| Suppliers of 600 Alloy Tube |
|
| Application & uses of Inconel WERKSTOFF NR. 2.4816 Tube | Gas Tube, Oil Tube, Heat exchanger Tube, Boiler Tube, Fluid Tube |
| Test Certificate | from Govt. Approved Lab Test Certificate Test Certificate of Manufacturer Under TPI |
| Specialize in |
|
| ANSI/ ASME B36.10, B36.19, B2.1 Inconel 600 Tube Dimension , We can also thread, groove and cut inconel to suit your 600 Alloy Tubing specifications. | |
For gas administration, better outcomes can be acquired by utilizing Alloy 600 Tubing admirably beneath this greatest hardness.
| Material | Condition | Maximum Hardness | ASTM | grade |
|---|---|---|---|---|
| Inconel Alloy 600 Tube |
Fully Annealed | 90 Rb | ASTM B-167 | 600 |
| Tubing | Recommended Temperature Range | General Application |
|---|---|---|
| Inconel Alloy 600 Tube | (-130°C to 650°C) 205°F - 1200°F | with Generally Corrosive Media Recommended for High Temperature Applications |
Don't forget to check our latest price of ASTM B163 600 Inconel boiler/condenser Tube as per ASME SB163 / SB516
| ( Outside Diameter) Inconel 600 Tubing Sizes | Thickness of Wall |
|---|---|
| 1/16" , 1/8" , 1/4" 3/16" , 3/8", 5/16" | 0.020 |
| 1/8" | 0.012 |
| 1/16" , 1/8" , 3/16" | 0.010 |
| 1/8" , 3/16" | 0.016 |
| 1/8" , 1/4" 3/16" , 3/8", 5/16" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/2" , 1 1/4" , 1 5/8" , 2" , 2 1/4" | 0.035 |
| 1/8" , 1/4" 3/16" , 3/8", 5/16" , 1/2" , 3/4" , 1" , 1 1/2" , 2" | 0.028 |
| 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/2" , 1 1/4" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" | 0.065 |
| 1/4" 3/16" , 3/8", 5/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/2" , 1 1/4" , 1 5/8" , 2" , 2 1/4" | 0.049 |
| 1/2" , 5/8" , 1 1/4" , 1" , 1 1/2" , 2" | 0.095 |
| 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/2" , 1 1/4" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" | 0.083 |
| 1/2" , 5/8" , 3/4" , 7/8" , 1 1/4" , 1" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" | .120 |
| 1/2" , 3/4" , 1 1/4" , 1" , 1 1/2" , 2" | .109 |
| 3/4" , 1 1/4" , 1" , 1 1/2" , 2" , 3" , 3 1/4" | .125 |
| 3" | .250 |
| 1" | .134 |
| 3 1/2" | .375 |
| Grade 600 Tube OD | Length of Inconel 600 tubing | Types of Inconel 600 Tube | Wall thickness | |
|---|---|---|---|---|
| 1/8” ~ 8” | Upto 6 Meters | NB Sizes(Ready stock) | SCH 10 / SCH 5 / SCH 80 / SCH 40 / SCH 160 | |
| 5.0 millimeter ~ 203.2 millimeter | Seamless (As Per need) | As per need | ||
| 5.0millimeter ~ 1219.2millimeter | Welded (Ready stock + As Per need) | 1.0 ~ 15.0 millimeter | ||
| 5.0millimeter ~ 203.2millimeter | Sanitary C276 tubing | As per need | ||
| The material test report (MTR) will be given with the inconel 600 tubing | ||||
Inconel 600 Tube might be a nickel-chromium alloys which is used in various welding structures. Inconel 600 Tube is most regularly used in techniques where high heat tolerance is required. Welding Inconel can be or possibly troublesome on the grounds that the welds that are made tendency to split, There are some alloys of Inconel that were especially anticipated use in welding like TIG.
| HS Code | Description |
|---|---|
| 75071200 | (NICKEL ALLOY SEAMLESS TUBES) INCONEL ALLOY 600 SEAMLESS COLD DRAWN TUBES BRIGHT ANNEALED ASME SB167 UNS N06600 |
| 75071200 | NICKEL ALLOY SEAMLESS TUBE INCONEL 600 (NI-74.30%, CR-15.69%) |
| 75071200 | NICKEL ALLOY TUBE AND PIPE - INCONEL ALLOY 600 CD PIPE -4.0 NB SCH 40 IN RANDOM |
| 75071200 | ANN 4.0 NB SCH 40 IN RANDOM NICKEL ALLOY TUBE AND PIPE -INCONEL ALLOY 600 CD PIPE PKL |
| 73012090 | UNSN06600 (8040 MM)- INCONEL 600 TUBE DIMENSIONS OD 0.125 *WALL THK 0.035, |
| 75071200 | INCONEL ALLOY 600 EXT TUBE OD 146MM,BORE 133MM,L 4590MM(2 PCS) (NICKEL ALLOY TUBE) |
| 75071200 | NICKEL ALLOY TUBE AND PIPE - INCONEL ALLOY 600 CD PIPE - 4.0 NB SCH 40 IN RANDOM |
| 75071200 | ANN 19.05 OD X 2.11 MINWA X 2250 MM CUT INCONEL ALLOY 600 CD TUBE (NICKEL ALLOY) |
| 75072000 | INCONEL 600 OD-25X WT-2MM (SEAMLESS INCONEL 600 TUBES) (NICKEL BASED TUBE) |
| 75071200 | ANN 25.4 ODX2.11 AVWA X 2005 MM CUT INCONEL ALLOY 600 CD TUBE (NICKEL ALLOY) |
| 75071200 | ANN 25.4 ODX2.11 MINWA X 1505 MM CUT INCONEL ALLOY 600 CD TUBE (NICKEL ALLOY) |
| 75071200 | ANN 25.4 ODX2.11 MINWA X 3005 MM CUT INCONEL ALLOY 600 CD TUBE (NICKEL ALLOY) |
| 75071200 | ANN 25.4 ODX2.11 AVWA X 2005 MM CUT INCONEL ALLOY 600 CD TUBE (NICKEL ALLOY) |
| 75071200 | ANN 25.4 ODX2.11 AVWA X 2005 MM CUT INCONEL ALLOY 600 CD TUBE (NICKEL ALLOY) |
Buy alloy 600 tubing in various shape like Round, Square & Rectangular in custom length at best price
| OD inches | Ave. Wall inches | D/t Ratio | ID inches | Tube Cross Sectional Area (in2) | Internal Area (in2) |
|---|---|---|---|---|---|
| 0.250 | 0.020 | 12.50 | 0.210 | 0.0145 | 0.0346 |
| 0.250 | 0.028 | 8.93 | 0.194 | 0.0195 | 0.0296 |
| 0.250 | 0.035 | 7.14 | 0.180 | 0.0236 | 0.0254 |
| 0.250 | 0.049 | 5.10 | 0.152 | 0.0309 | 0.0181 |
| 0.250 | 0.065 | 3.85 | 0.120 | 0.0378 | 0.0113 |
| 0.375 | 0.020 | 18.75 | 0.335 | 0.0223 | 0.0881 |
| 0.375 | 0.028 | 13.39 | 0.319 | 0.0305 | 0.0799 |
| 0.375 | 0.035 | 10.71 | 0.305 | 0.0374 | 0.0731 |
| 0.375 | 0.049 | 7.65 | 0.277 | 0.0502 | 0.0603 |
| 0.375 | 0.065 | 5.77 | 0.245 | 0.0633 | 0.0471 |
| 0.500 | 0.020 | 25.00 | 0.460 | 0.0302 | 0.1662 |
| 0.500 | 0.028 | 17.86 | 0.444 | 0.0415 | 0.1548 |
| 0.500 | 0.035 | 14.29 | 0.430 | 0.0511 | 0.1452 |
| 0.500 | 0.049 | 10.20 | 0.402 | 0.0694 | 0.1213 |
| 0.500 | 0.065 | 7.69 | 0.370 | 0.0888 | 0.1075 |
| 0.500 | 0.083 | 6.02 | 0.334 | 0.1087 | 0.0876 |
| 0.625 | 0.020 | 31.25 | 0.585 | 0.0380 | 0.2688 |
| 0.625 | 0.028 | 22.32 | 0.569 | 0.0525 | 0.2543 |
| 0.625 | 0.035 | 17.86 | 0.555 | 0.0649 | 0.2419 |
| 0.625 | 0.049 | 12.76 | 0.527 | 0.0887 | 0.2181 |
| 0.625 | 0.065 | 9.62 | 0.495 | 0.1144 | 0.1924 |
| 0.625 | 0.083 | 7.53 | 0.459 | 0.1413 | 0.1655 |
| 0.625 | 0.095 | 6.58 | 0.435 | 0.1582 | 0.1486 |
| 0.625 | 0.109 | 5.73 | 0.407 | 0.1767 | 0.1301 |
| 0.750 | 0.028 | 26.79 | 0.694 | 0.0635 | 0.3783 |
| 0.750 | 0.035 | 21.43 | 0.680 | 0.0786 | 0.3632 |
| 0.750 | 0.049 | 15.31 | 0.652 | 0.1079 | 0.3339 |
| 0.750 | 0.065 | 11.54 | 0.620 | 0.1399 | 0.3019 |
| 0.750 | 0.083 | 9.04 | 0.584 | 0.1739 | 0.2679 |
| 0.750 | 0.095 | 7.89 | 0.560 | 0.1955 | 0.2463 |
| 0.750 | 0.109 | 6.88 | 0.532 | 0.2195 | 0.2223 |
| 0.750 | 0.120 | 6.25 | 0.510 | 0.2375 | 0.2043 |
| 0.875 | 0.020 | 43.75 | 0.835 | 0.0537 | 0.5476 |
| 0.875 | 0.028 | 31.25 | 0.819 | 0.0745 | 0.5268 |
| 0.875 | 0.035 | 25.00 | 0.805 | 0.0924 | 0.5090 |
| 0.875 | 0.049 | 17.86 | 0.777 | 0.1272 | 0.4742 |
| 0.875 | 0.065 | 13.46 | 0.745 | 0.1654 | 0.4359 |
| 0.875 | 0.083 | 10.54 | 0.709 | 0.2065 | 0.3948 |
| 0.875 | 0.095 | 9.21 | 0.685 | 0.2328 | 0.3685 |
| 0.875 | 0.109 | 8.03 | 0.657 | 0.2623 | 0.3390 |
| 0.875 | 0.120 | 7.29 | 0.635 | 0.2846 | 0.316L7 |
| 1.000 | 0.028 | 35.71 | 0.944 | 0.0855 | 0.6999 |
| 1.000 | 0.035 | 28.57 | 0.930 | 0.1061 | 0.6793 |
| 1.000 | 0.049 | 20.41 | 0.902 | 0.1464 | 0.6390 |
| 1.000 | 0.065 | 15.38 | 0.870 | 0.1909 | 0.5945 |
| 1.000 | 0.083 | 12.05 | 0.834 | 0.2391 | 0.5463 |
| 1.000 | 0.095 | 10.53 | 0.810 | 0.2701 | 0.5153 |
| 1.000 | 0.109 | 9.17 | 0.782 | 0.3051 | 0.4803 |
| 1.000 | 0.120 | 8.33 | 0.760 | 0.3318 | 0.4536 |
| 1.000 | 0.134 | 7.46 | 0.732 | 0.3646 | 0.4208 |
| 1.250 | 0.035 | 35.71 | 1.180 | 0.1336 | 1.0936 |
| 1.250 | 0.049 | 25.51 | 1.152 | 0.1849 | 1.0423 |
| 1.250 | 0.065 | 19.23 | 1.120 | 0.2420 | 0.9852 |
| 1.250 | 0.083 | 15.06 | 1.084 | 0.316L3 | 0.9229 |
| 1.250 | 0.095 | 13.16 | 1.060 | 0.3447 | 0.8825 |
| 1.250 | 0.109 | 11.47 | 1.032 | 0.3907 | 0.8365 |
| 1.250 | 0.120 | 10.42 | 1.010 | 0.4260 | 0.8012 |
| 1.250 | 0.134 | 9.33 | 0.982 | 0.4698 | 0.7574 |
| 1.500 | 0.035 | 42.86 | 1.430 | 0.1611 | 1.6061 |
| 1.500 | 0.049 | 30.61 | 1.402 | 0.2234 | 1.5438 |
| 1.500 | 0.065 | 23.08 | 1.370 | 0.2930 | 1.4741 |
| 1.500 | 0.083 | 18.07 | 1.334 | 0.3695 | 1.3977 |
| 1.500 | 0.095 | 15.79 | 1.310 | 0.4193 | 1.3478 |
| 1.500 | 0.109 | 13.76 | 1.282 | 0.4763 | 1.2908 |
| 1.500 | 0.120 | 12.50 | 1.260 | 0.5202 | 1.2469 |
| 1.500 | 0.134 | 11.19 | 1.232 | 0.5750 | 1.1921 |
| 1.500 | 0.148 | 10.14 | 1.204 | 0.6286 | 1.1385 |
| 1.750 | 0.035 | 50.00 | 1.680 | 0.1886 | 2.2167 |
| 1.750 | 0.049 | 40.82 | 1.902 | 0.3003 | 2.8413 |
| 1.750 | 0.065 | 26.92 | 1.620 | 0.3441 | 2.0612 |
| 1.750 | 0.083 | 21.08 | 1.584 | 0.4347 | 1.9706 |
| 1.750 | 0.095 | 18.42 | 1.560 | 0.4939 | 1.9113 |
| 1.750 | 0.109 | 16.06 | 1.532 | 0.5619 | 1.8433 |
| 1.750 | 0.120 | 14.58 | 1.510 | 0.6145 | 1.7908 |
| 1.750 | 0.134 | 13.06 | 1.482 | 0.6803 | 1.7250 |
| 1.750 | 0.148 | 11.82 | 1.454 | 0.7449 | 1.6604 |
| 1.750 | 0.165 | 10.61 | 1.420 | 0.8216 | 1.5837 |
| 2.000 | 0.035 | 57.14 | 1.930 | 0.2161 | 2.9255 |
| 2.000 | 0.049 | 40.82 | 1.902 | 0.3003 | 2.8413 |
| 2.000 | 0.065 | 30.77 | 1.870 | 0.3951 | 2.7465 |
| 2.000 | 0.083 | 24.10 | 1.834 | 0.4999 | 2.6417 |
| 2.000 | 0.095 | 21.05 | 1.810 | 0.5685 | 2.5730 |
| 2.000 | 0.109 | 18.35 | 1.782 | 0.6475 | 2.4941 |
| 2.000 | 0.120 | 16.67 | 1.760 | 0.7087 | 2.4328 |
| 2.000 | 0.134 | 14.93 | 1.732 | 0.7855 | 2.3561 |
| 2.000 | 0.148 | 13.51 | 1.704 | 0.8611 | 2.2805 |
| 2.000 | 0.165 | 12.12 | 1.670 | 0.9512 | 2.1904 |
| Philippines, Iran, Chile, Canada | Nickel Based Alloy Inconel 600 Tube |
| United Arab Emirates (UAE), Europe, Norway, Romania | Inconel 600 Seamless Nickel Alloy Steel Tube |
| Netherlands, Sweden, Russia, Malaysia | Nickel Based Alloy Inconel 600 Nickel-Chromium Steel Round Tube |
| Malaysia, Mexico, Los Alamos -Mexico, Egypt | En 2.4816 Uns N06600 Nickel UNS N06600 Seamless Tube |
| United Kingdom -UK, Singapore, Malaysia, NY 12203 (USA) | Nickel Base Capillary Tube Inconel 600 5X0.1mm |
| UK, Dammam -KSA, Poland, Philippines | Metal Gas Drilling Inconel Alloy 600 Tube |
| Singapore, Malaysia, Qatar, Europe | N06600 / Inconel 600 Stainless Seamless Steel Tubes |
| Malaysia, Czechia, Japan, Thailand | Nickel Alloy Tube Inconel 600 (CE DNV PED BV SGS) |
| Colombia, Bangladesh, China, Malaysia | N06600 Inconel 600 Tube with ASTM Certificate |
| Philippines, South Africa, Taiwan, Kuwait | Inconel 600 Welding Tube |
| Malaysia, Bahrain, South Korea, Singapore | Inconel 600 High Temperature Nichrome Alloy Tube |
| Belgium, Philippines, Indonesia, UK | Nickel Base Capillary Tube Inconel 600 Seamless Tube Werkstoff Nr. Wr. 2.4816 MOQ 30m Acceptable. |
| Thailand, Oman, France, Hong Kong | Inconel 600 2.4816 Uns N06600 Alloy 600 Steel Tube |
| Malaysia, Germany, Turkey | Inconel 600 Heat Corrosion Resistant Nickel Alloy Tube |
| Finland, Dubai, USA, Malaysia | Inconel 600 Nickel Alloy Seamless Tube |
| Brazil, UK, Saudi Arabia (KSA), Spain | ASME Sb 167 Inconel 600 Seamless Steel Tube |
| Singapore, UAE, South Africa, Europe | 2.4816 Alloy 600 Uns N06600 Seamless Inconel 600 Tube |
| Nigeria, Ellington -United States, Australia, Canada | 4*0.25mm Inconel 600 Tube |
for Process piping American standard (ASME B31.3 : 2012)
wall tolerance Selected : ±10%
Wall Thickness and Outside Diameter (Mm): 1.59 X 0.36
| Material | ksi, Max internal pressure |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 200°F | 100°F | 400°F | 300°F | 500°F | 700°F | 600°F | Comments | ||||
| N06600 :2 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | OD>5" and cold worked + ASTM B167 OD<=5" and hot worked | |||
| N06600 :3 | 11.19 | 11.19 | 11.19 | 11.19 | 11.19 | 11.19 | 11.19 | cold worked and B167 OD<=5" | |||
| N06600 :1 | 8.02 | 8.02 | 8.02 | 8.02 | 8.02 | 8.02 | 8.02 | hotworked and B167 OD>5" | |||
wall tolerance Selected : ±10%
Wall Thickness and Outside Diameter (Mm): 6 X 1
| Material | ksi, Max internal pressure |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 200°F | 100°F | 400°F | 300°F | 500°F | 700°F | 600°F | Comments | ||||
| N06600 :2 | 470 | 470 | 470 | 470 | 470 | 470 | 470 | + OD>5" and cold worked + B167 OD<=5" and hot worked | |||
| N06600 :3 | 547 | 547 | 547 | 547 | 547 | 547 | 547 | cold worked and B167 OD<=5" | |||
| N06600 :1 | 392 | 392 | 392 | 392 | 392 | 392 | 392 | hot worked and B167 OD>5" | |||
wall tolerance Selected : ±10%
Wall Thickness and Outside Diameter (Mm): 8 X 1
| Material | ksi, Max internal pressure |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 200°F | 100°F | 400°F | 300°F | 500°F | 700°F | 600°F | Comments | ||||
| N06600 :2 | 340 | 340 | 340 | 340 | 340 | 340 | 340 | OD>5" and cold worked + B167 OD<=5" and hot worked | |||
| N06600 :1 | 284 | 284 | 284 | 284 | 284 | 284 | 284 | hot worked and B167 OD>5" | |||
Inconel 600 Tube is regularly bent on ordinary tube bending equipment. Mandrel benders are suggested especially for tight bends. Bends made without a mandrel require bigger radii. In the event that more modest radius bends are required, it very well might be important to bend the tubing at 400°-600°F (204°-316°C).
Inconel
Inconel is a group of austenitic nickel-chromium-based superalloys.
Composition of Inconel
| Inconel | Element (% by mass) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ni | Cr | Fe | Mo | Nb | Co | Mn | Cu | Al | Ti | Si | C | S | P | B | |
| 601 | 72.0 | 14.0–17.0 | 6.0–10.0 | 1.0 | 0.5 | 0.5 | 0.15 | 0.015 | |||||||
| 617 | 44.2–56.0 | 20.0–24.0 | 3.0 | 8.0–10.0 | 10.0–15.0 | 0.5 | 0.5 | 0.8–1.5 | 0.6 | 0.5 | 0.15 | 0.015 | 0.015 | 0.006 | |
| 601 | 58.0 | 20.0–23.0 | 5.0 | 8.0–10.0 | 3.15–4.15 | 1.0 | 0.5 | 0.4 | 0.4 | 0.5 | 0.1 | 0.015 | 0.015 | ||
| 690 | 59.5 | 30 | 9.2 | 0.35 | 0.01 | 0.02 | 0.35 | 0.019 | 0.003 | ||||||
| 718 | 50.0–55.0 | 17.0–21.0 | balance | 2.8–3.3 | 4.75–5.5 | 1.0 | 0.35 | 0.2–0.8 | 0.65–1.15 | 0.3 | 0.35 | 0.08 | 0.015 | 0.015 | 0.006 |
| X-750 | 70.0 | 14.0–17.0 | 5.0–9.0 | 0.7–1.2 | 1.0 | 1.0 | 0.5 | 0.4–1.0 | 2.25–2.75 | 0.5 | 0.08 | 0.01 | |||
incoloy
Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies.
Compositions (percentages) of Incoloy
| Alloy name | Balance metal |
Chro mium |
Alu minum |
Tita nium |
Carbon | Yttrium oxide | Copper | Man ganese |
Cobalt | Nickel | Phos phorus |
Silicon | Sulphur | Moly bdenum |
Nb +Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 020 | Fe (~40%) | 20 | n/p | n/p | <0.07 | n/p | 3.5 | <2.0 | n/p | 35 | <0.045 | <1.0 | <0.035 | 2.5 | about 1 |
| DS | Fe (~40%) | 18 | n/p | 0.2 | 0.1 | nil | 0.5 | 0.8-1.5 | 18 (Co+ Ni 38) |
18 (Co+ Ni 38) |
n/p | 2.3 | 0.03 | ||
| MA956 | Fe (~75%) | 20 | 4.75 | 0.4 | <0.1 | 0.5 | <0.15 | <0.3 | <0.3 | <0.5 | <0.02 | n/p | n/p |
Carbon |
0.15 max |
Chromium |
14 – 17 |
Copper |
0.5 max |
Iron |
6 – 10 |
Manganese |
1 max |
Nickel |
Balance |
Silicon |
0.5 max |
Sulphur |
0.015 max |
Alloy and state |
tensile strength Rm N/mm2 |
Yield Strength RPO.2N/mm2 |
Extensibility A5% |
Brinell hardness HB |
annealing treatment |
550 |
240 |
30 |
=195 |
solid solution treatment |
500 |
180 |
35 |
=185 |
Density (lb / cu. in.) |
0.306 |
Specific Gravity |
8.47 |
Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) |
0.106 |
Electrical Resistivity (microhm-cm (at 68 Deg F)) |
620 |
Melting Point (Deg F) |
2550 |
Thermal Conductivity |
103 |
Mean Coeff Thermal Expansion |
5.8 |
Magnetic Permeability |
1.01 |
Modulus of Elasticity Tension |
31.1 |
Reduction of Area |
60 |
| STANDARD | WERKST OFF NR. |
UNS | JIS | AFNOR | BS | GOST | EN | OR |
| Inconel 600 | 2.4816 | N06600 | NCF 600 |
NC15F E11M |
NA 13 | МНЖ Мц 28-2,5-1,5 |
NiCr 15Fe |
ЭИ868 |
2.4816 Alloy 600 Tubes |
n06600 nickel alloy Tubes |
Inconel alloy 600 tubing |
Tube alloy 600 |
N06600 alloy tubing |
N06600 alloy tube |
Alloy 600 Tube |
Alloy 600 Tubing |
SB167 N06600 Seamless Tubing |
SB 167 UNS N06600 Tubes |
N06600 tubing |
Nickel alloy uns N06600 Exhaust Tubing |
Nickel alloy 600 tubing |
Inconel alloy 600 tube |
Alloy 600 Seamless Tubing |
Alloy 600 Seamless Tube |
600 alloy Tubes |
600 inconel tubing |
Why to pay extra if you have choice to get exact sizes and wall thickness in NCF 600 Heat Exchanger Tube
- Jet Engine exhaust systems
- Sour gas production tubes
- Motor racing exhaust systems
- Nuclear waste reprocessing equipment
- Chemical Processing
- Chimney Linings
- Aerospace equipment



















