Inconel 600 Round Bar

 

 

 

Inconel 600 Round Bar

 

specification
Range 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75.
Standard ASTM / ASME SB 166, ASTM / ASME B 446 , ASTM / ASME B 637, ASTM B 511, ASTM B 408.
Length 100 mm To 3000 mm Long & Above
Finish Bright, Polish & Black
Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.
Grade Inconel 600 Bars – UNS N06600, Inconel 601 Rods – UNS N06601, Inconel 625 Wire – UNS N06625, Incoloy 800 Bars – UNS N08800, Incoloy 800H / HT Rods – UNS N08810, Incoloy 825 Round Bars– UNS N08825

 

STANDARD WERKST
OFF NR.
UNS JIS AFNOR BS GOST EN OR
Inconel / Incoloy 2.4816 N06600 NCF 600 NC15
FE11M
NA 13 МНЖМц 28-2,5-1,5 NiCr
15Fe
ЭИ
868


 

Click Here For Video Of Inconel 600 Round Bar

 

Inconel Grade Specification
CES Name USA UK France Germany
Alloy Name UNS ASTM AMS BSand DTH AFNOR DIN Werkstoff Nr.
Incoloy INCOLOY 800 N08800 B407-409 5766, 5871 BS3072-76: NA15 25NC35-20 X10 NiCr Al Ti
1.4876
INCOLOY 801 N08801
INCOLOY 825 N08825 B423-425 BS3072-76: NA16 WFe32C20DU 17744, 17750-52 2.4858
Inconel INCONEL 600 N06600 B166-168, B564 5540, 7232 BS3072-76: NA14 NC 15Fe 17742:NiCr 15Fe 2.4816
INCONEL 601 N06601 5715, 5870
17742
2.4851
INCONEL 617 N06617
INCONEL 625 N06625 B443-4, B446 5581, 5837 BS3076: NA21 17744, 17750-52 2.4856
INCONEL 671
INCONEL 690 N06690
INCONEL 706 N09706
INCONEL 713C N07713
INCONEL 713LC
INCONEL 718 N07718 B637, B670 NC19FeNb 2.4668
INCONEL X-750 N07750 B637 5542, 5582/3 HR 505 NC 15Fe-T 2.4669

 

inconel 600 Round Bar Chemical Composition
Carbon
0.15 max
Chromium
14 – 17
Copper
0.5 max
Iron
6 – 10
Manganese
1 max
Nickel
Balance
Silicon
0.5 max
Sulphur
0.015 max

 

inconel 600 Round Bar Physical Properties
Density (lb / cu. in.)
0.306
Specific Gravity
8.47
Specific Heat (Btu/lb/Deg F – [32-212 Deg F])
0.106
Electrical Resistivity (microhm-cm (at 68 Deg F))
620
Melting Point (Deg F)
2550
Thermal Conductivity
103
Mean Coeff Thermal Expansion
5.8
Magnetic Permeability
1.01
Modulus of Elasticity Tension
31.1
Reduction of Area
60

 

inconel 600 Round Bar Mechanical Properties
Alloy and state

tensile strength

Rm N/mm2

Yield Strength

RPO.2N/mm2

Extensibility

A5%

Brinell hardness

HB

annealing treatment
550
240
30
=195
solid solution treatment
500
180
35
=185