Inconel 600 Plate

 

 

 

Inconel 600 Plate

 

inconel 600 plate specification
Range 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Standard ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443, UNS N06600 / Werkstoff Nr. 2.4816
Type Sheet, Plates, Flat, Strips, Profile, Blank ,Circle, Ring etc.
Length Single Random, Double Random & Cut Length
End Plain End, Bevelled End, Threaded
Grade Incoloy 600 – UNS N06600

 

Inconel 600 Plate density
UNS N06600 Inconel 600 Plate density
304 lb/in3

Specific Heat Btu/lb °F
0.11

 

Alloy 600 Plate melting range
ASTM B168 Alloy 600 Plate melting range
2470-2575°F

 

Dimensions of Inconel 600 Plate

 ASTM B168 Alloy 600 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

 

ASTM B168 600 Alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

Difference between Inconel 600 Plate, Sheet, & Foil
  • Thickness greater than 6.35 mm is called a Inconel 600 Plate.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Inconel 600 Sheet.
  • Thickness less than 0.15mm is called a Inconel 600 Foil.

 

inconel 600 Plate Chemical Composition
Carbon
0.15 max
Chromium
14 – 17
Copper
0.5 max
Iron
6 – 10
Manganese
1 max
Nickel
Balance
Silicon
0.5 max
Sulphur
0.015 max

 

inconel 600 Plate Physical Properties
Density (lb / cu. in.)
0.306
Specific Gravity
8.47
Specific Heat (Btu/lb/Deg F – [32-212 Deg F])
0.106
Electrical Resistivity (microhm-cm (at 68 Deg F))
620
Melting Point (Deg F)
2550
Thermal Conductivity
103
Mean Coeff Thermal Expansion
5.8
Magnetic Permeability
1.01
Modulus of Elasticity Tension
31.1
Reduction of Area
60

 

inconel 600 Plate Mechanical Properties
Alloy and state

tensile strength

Rm N/mm2

Yield Strength

RPO.2N/mm2

Extensibility

A5%

Brinell hardness

HB

annealing treatment
550
240
30
=195
solid solution treatment
500
180
35
=185

 

inconel 600 plate Equivalent Grade
STANDARD WERKST
OFF
NR.
UNS JIS AFNOR BS GOST EN OR
Inconel 600 2.4816 N06600 NCF
600
NC15F
E11M
NA 13 МНЖ
Мц
28-2,5-1,5
NiCr
15Fe
ЭИ868