incoloy 825 round bar specification
| Range | 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75. |
| Standard | ASTM / ASME SB 166, ASTM / ASME B 446 , ASTM / ASME B 637, ASTM B 511, ASTM B 408. |
| Length | 100 mm To 3000 mm Long & Above |
| Finish | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
| Grade | Inconel 600 Bars – UNS N06600, Inconel 601 Rods – UNS N06601, Inconel 625 Wire – UNS N06625, Incoloy 800 Bars – UNS N08800, Incoloy 800H / HT Rods – UNS N08810, Incoloy 825 Round Bars– UNS N08825 |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
inconel 825 Round Bar Chemical Composition
Incoloy 825 |
|
Ni |
38.0 – 46.0 |
Cr |
19.5 – 23.5 |
Fe |
22.0 min |
Mb |
2.5 – 3.5 |
Ti |
0.6 – 1.2 |
Cu |
1.5 – 3.0 |
Mn |
1.0 max |
C |
0.05 max |
S |
0.03 max |
Al |
0.2 max |
Si |
0.5 max |
incoloy 825 Round Bar Mechanical Properties
Density |
8.14 g/cm3 |
Melting Point |
1400 °C (2550 °F) |
Tensile Strength |
Psi – 80,000 , MPa – 550 |
Yield Strength (0.2%Offset) |
Psi – 32,000 , MPa – 220 |
Elongation |
30 % |
Inconel 825 Round Bar Surface finish
| CD | Cold drawn | P | Polished |
| BD | Bright drawn | SRE | Slit rolled edge |
| CG | Centreless ground | HF | Hot finished |
| CF | Cold finished | HRAP | Hot rolled annealed and pickled |
| P&T | Peeled and turned | RT | Rough turned/peeled |
| ST | Smooth turned | PR | Peeled and reeled |
Inconel Alloy 825 Round Bar Tolerances
| Tolerances for Cold Drawn Inconel 825 Round Bar | ||
|---|---|---|
| Shape / Section | Size, diameter or width across flats | Permitted variation |
| mm | mm | |
| Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
| Flat (thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
| Flat (width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
| Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |