Incoloy 825 Plate

 

inconel alloy 825 Sheet Supplier in india

Incoloy 825 Plate
Incoloy 825 Plate
Nickel Alloy 825 Sheet
Nickel Alloy 825 Sheet
Inconel 825 Plate
Inconel 825 Plate

 

Specialized in DIN 2.4858 Coil/Foil and ASTM B424 N08825 Strip up to 12 mm thickness at lowest price in India

 

The alloy's nickel content is adequate for tolerance to chloride ion and stress corrosion cracking. The anti-oxidation and non-oxidizing heat acid efficiency of alloy 825 is excellent. After fabrication and pitting, the titanium content of the alloy continues to withstand intergranular assault. All traditional mechanics demonstrate the alloy 825 has strong weldability.Inconel alloy 825 Sheet has strong mechanical durability at room temperature and up to 550 degrees Celsius. These Incoloy 825 Sheets are stabilised and annealed at the mill to prevent intergranular corrosion when welded.

Nickel Alloy 825 Coil is widely used in process piping, heat exchangers, carburizing devices, heating-element sheathing, and nuclear steam generator tubing.Types of Inconel Alloy 825 plates Hot Rolled Incoloy 825 Plates with a 2B finish Incoloy 825 board, Inconel WERKSTOFF NR. 2.4858 foils, ASTM B424 UNS N08825 steel plate, Incoloy 825 cold rolled plates, and other products are accessible.

The highest corrosion tolerance to stress corrosion cracking is Inconel N08825 Strip. Nickel content up to 46 percent, Chromium content up to 23.50 percent, and Ferrite content up to 22 percent are all possible in Inconel 825 UNS N08825 Strips. The strongest corrosion resistance properties are found in Inconel 825 Strip. It is best to process Inconel 825 alloy at temperatures ranging from 196 degrees Celsius to 450 degrees Celsius.

 

Table Of Content

 

Price of Alloy 825 Plate in India
Description Price list of Incoloy 825 Plate in India
Special Nickel Alloy Incoloy 825 Plate US $ 800-1500 / Ton
Metal Copper Incoloy 825 Steel Plate US $ 12.32-15.35 / KG
Incoloy 825 Alloys Stainless Steel Plate Corrosion Resistant Alloy Steel Plate US $ 1299-1899 / Ton
Nickel Based Alloy Incoloy 825 High Temperature Alloy Steel Sheet Plate US $ 30000 / Ton
Inconel 825 Nickel Alloy Plate US $ 47-56 / kg
Alloy Inconel 825 Plate US $ 20-70 / kg
N08825 High Quality Nickel Sheet /Plate 2.4858 US $ 15000-40000 / Ton
High Temperature Alloy Material Incoloy 825 Plate US $ 20-70 / kg
Inconel 825 High Quality Alloy Thin Plate US $ 10 / Piece

If it's not too much trouble, note This is an estimated Cost of 825 Incoloy Sheet in India. For best Price purchase directly from Incoloy 825 Plate Supplier In India, check latest ASTM B424 Alloy 825 Plate price list & stock sizes if it's not too much trouble, mail us.

 

Specification table of Incoloy 825 Plate
Type Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
Grade ASTM B424 UNS N08825, INCOLOY 825 (42 Ni/22 Cr/3 Mo) , ASME SB424, AMS, MSRR, BS
UNS N08825 Plate Length 0-12mm or as required
Specification of Alloy 825 Plate ASTM B424 UNS N08825, ASME SB424, MSRR, BS, AMS 4544 sheet
ASTM B424 Alloy 825 Plate Width 0-2500mm or as required
Plate Thickness 0.3 to 1200 mm or as required
825 Incoloy Plate Process Hot/ Cold Rolled
Plate surface No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B424 Alloy 825 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.

 

Other Incoloy 825 Plate Information for buyers

ASTM B424 Alloy 825 Plate, Sheet and Strip
BS 3073NA16, ASTM B 424, ASME SB 424, DIN 17750, ASME SB 906, ISO 6208, VdTÜV 432, BS 3072NA16 , ASTM B 906
Tolerances of width and thickness
  • EN 10258 (formerly DIN 59381)
  • EN 10151 ASTM B424 Alloy 825 strip for springs
  • EN 10088 ASTM B424 Alloy 825 strip (general)
Incoloy 825 Plate standards and approvals
  • EN ISO 18286
  • EN 10051
  • EN 10088-1
  • ISO 15510
  • EN ISO 9445
  • ASTM A 480
  • ASTM A 959
  • ASME IID
Standard 2.4858 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Cold rolled 825 Incoloy Plate 0.5-6.4 mm
  • Hot rolled 825 Incoloy Plate 3.0–10.0 mm
Alloy 825 Plate Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B424 Alloy 825 Sheet suppliers
Availability of Nickel Alloy 825 Foil sizes Thickness : 8-100 microns (0.00031-0.004 in)
Width: Up to 500 mm (19.5 in)
Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Plasma profiles As per customer's drawings
Value added services for Incoloy 825 Plate Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.
UNS N08825 Plate Manufacturer in india
  • ASTM B424 Alloy 825 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • 825 Incoloy Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • Alloy Incoloy 825 Clad plate: Alloy Incoloy 825 Clad plate is a composite steel plate made by bonding UNS N08825 Incoloy 825 plate, etc.
  • ASTM B424 Alloy 825 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
DIN 2.4858 Plate Origin Indian Origin, European Origin, Japanese Origin
Packing of 825 Alloy plate Bundles with waterproof cloth outside or plywood box
services for Incoloy Alloy 825 Coil
  • Cut-to-length
  • Slitting
  • Polishing
  • Blanking
Test UT, SGS testing, TUV etc
dealers & distributors are located in Port-of-Spain, Abu Dhabi, New Delhi, Pimpri-Chinchwad, Gimhae-si, Mumbai, London, Tehran, Jamshedpur, Hyderabad, Ernakulam, Melbourne, Vadodara, Kolkata, Karachi, Kuwait, Rajkot, Ahmedabad, Sydney, Dammam, Howrah, Ranchi, Bogota, Ludhiana, Noida, Nagpur,Indore, Tau, Ahvaz, India, Thiruvananthapuram, Manama, Janeiro, Perth, Mexico Ludhiana, Calgary, Bengaluru, Caracas, Baroda, Istanbul, Coimbatore, Chennai, Gurgaon Courbevoie, Riyadh, Lagos, Santiago, Muscat, Bangalore Montreal, Ankara, Surat, Gujarat, Khobar, Kanpur
Why buy UNS N08825 Plate from Jignesh Steel ?
  • Free quote
  • Free sample
  • EN 10204 3.1
  • Mill Test Certificate is supplied with shipment.
  • NABL Approved Lab Reports
  • Any third party inspection is accepted.
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Minimum Nitrogen content and Ferrite Count Test

 

What is Incoloy 825 Plate?

A nickel, chromium, and iron alloy with added molybdenum, copper, and titanium is known as Inconel 825 plate. It is also known as Incoloy 825 plate.The alloy 825 was created to have outstanding tolerance to a variety of corrosive and reducing conditions that absorb sulphuric acid and phosphoric acid.

 

Incoloy 825 Plate Types
ASTM B424 Alloy 825 Sheet
ASTM B424 Alloy 825 Sheet
600  Inconel Plate
825 Incoloy Plate
Alloy Incoloy 825 Coil
Alloy Incoloy 825 Coil
UNS N08825 Inconel 825 Foil
UNS N08825 Inconel 825 Foil
Inconel 825 Superalloy Mesh Plate
Inconel 825 Superalloy Mesh Plate
Nickel Alloy 825 Checker Plate
Nickel Alloy 825 Checker Plate
2.4858 Incoloy 825 Hot Rolled Plate
2.4858 Incoloy 825 Hot Rolled Plate
Nickel Alloy 825 Cold Rolled Plate
Nickel Alloy 825 Cold Rolled Plate
ASTM B424 Alloy 825 Strip
ASTM B424 Alloy 825 Strip
600  Inconel Shim Sheet
825 Incoloy Shim Sheet
Alloy Incoloy 825 Strip Tape
Alloy Incoloy 825 Strip Tape
UNS N08825 Incoloy 825 Chequered Plate
UNS N08825 Incoloy 825 Chequered Plate
ASTM B424 Alloy 825 Perforated Sheet
ASTM B424 Alloy 825 Perforated Sheet
Alloy Incoloy 825 Shim Stock
Alloy Incoloy 825 Shim Stock
Alloy 825 inconel Clad Plate
Alloy 825 inconel Clad Plate
Incoloy 825 Din 2.4858 Cold Rolled Sheet
Incoloy 825 Din 2.4858 Cold Rolled Sheet

 

melting range of Alloy 825 Plate
UNS N08825 Incoloy 825 Plate melting range
  • °F : 2500-2550
  • °C :1370-1400

 

ASTM B424 Alloy 825 Sheet, Plate & Foil Difference
  • Thickness greater than 6.35 mm is called a Incoloy 825 Plate.
  • Thickness less than 0.15mm is called a Incoloy 825 Foil.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Incoloy 825 Sheet.

 

density of Incoloy 825 Plate

ASTM B424 Alloy 825 Plate density
  • lb/in3 : 0.294
  • Mg/m3 : 8.14

 

thickness tolerance chart of Nickel Alloy 825 plate

Tolerances on thickness of steel plates

                                              Tolerance over and under nominal thickness t (mm)
Width w (mm) 2.5<t <4.5 4.5<t <6.0 6.0<t <8.0 8.0<t <10.0 10.0<t <12.5 12.5<t <16.0 16.0<t <20.0  20.0<t <25.0 25.0<t <30.0 30<t <40.0
w < 1200 0.20  0.23 0.30 0.32 0.35 0.80 0.80 0.80 1.0 1.4
1200< w <1500 0.20 0.25 0.30 0.35 0.38 0.80 0.80 0.90 1.0 1.4
1500< w <1800 0.20 0.28 0.32 0.38 0.40 0.80 0.80 0.90 1.1 1.5
1800< w <2100 0.20     0.30      0.36     0.40     0.45      0.80      0.80      0.90      1.1         1.5        
2100< w <2400   0.80 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.5
2400< w <2700   0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.3 1.7
2700< w <3000   0.80 0.90 1.0 1.0 1.0 1.1 1.3 1.4 1.8

 

Tolerances on length of plates
                                                                                                     Tolerance(mm)                                 
Nominal length (mm)                                         Minus Plus
L < 2,000 0                                                   10                                                     
2,000 L < 8,000 0 0.005 times L
L > 8,000 0 40

  

Tolerances on width of plates
                                                                                                 Tolerance (mm)
  Trimmed edge                                                Mill edge                                              
Nominal width (mm) Minus Plus Minus Plus
w < 1200 0 3 0 20
1200 < w < 1500 0 5 0 20
w > 1500 0 5 0 20

 

Inconel 825 Plate suppliers, Find your choice of sizes from our Alloy 825 Hot Rolled Plate stock, available in types of Clad/Flat/ Polish and Thick Plate

 

Equivalent of Incoloy 825 Plate
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

 

Properties of Alloy 825 Plate

Incoloy 825 Plate Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20

  

UNS N08825 Plate Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

 

hs code of ASTM B424 825 Incoloy Plate
HS Code Description
75062000 INCOLOY ALLOY 825 HOT ROLLED PLATE (NI-41.8%, CR-23.2%, MO-3.20% FE-27.5%) 2000MM X 6000MM X 10MM THICK
72109090 CLAD PLATES IN GRADE AP X-60 PSL -2 (BASE METAL)+INCOLOY 825 OF API 5LD GRADE LC2242: UNS NO. : NO8825 DIMESION NOMINAL
72109090 CLAD PLATES IN GRADE AP X-60 PSL -2 (BASE METAL)+INCOLOY 825 OF API 5LD GRADE LC2242: UNS NO. : NO8825 DIMESION NOMINAL
72109090 CLAD PLATES - SA265 (SA 516 GR.70 + INCOLOY 825) SIZE: LEGTH: 6560 X WIDTH: 1630 X THK: (48.00 + 3.50) MM (QTY: 1 PC.)
72109090 CLAD PLATES - SA265 (SA 516 GR.70 + INCOLOY 825) SIZE: LENGTH: 8700 X WIDTH: 2500 X THK: (16.00 + 3.00) MM (QTY: 2 PCS.)
72109090 CLAD PLATES - SA265 (SA 516 GR.70 + INCOLOY 825) SIZE: LENGTH: 8250 X WIDTH: 2500 X THK: (14.00 + 3.00)MM (QTY: 4 PCS.)
72109090 CLAD PLATES - SA265 (SA 516 GR.70 + INCOLOY 825) SIZE: LEGTH:11200 X WIDTH: 2500 X THK: (14.00 + 3.00)MM (QTY: 2 PCS)
72109090 CLAD PLATES - SA265 (SA 516 GR.70 + INCOLOY 825) SIZE: LEGTH: 11565 X WIDTH: 1600 X THK: (16.00 + 3.00)MM (QTY: 2 PCS)
72109090 CLAD PLATES - SA265 (SA 516 GR.70 + INCOLOY 825) SIZE: LEGTH: 8350 X WIDTH: 2500 XTHK: (40.00 + 3.00)MM (QTY: 4 PCS)
72109090 CLAD PLATES - SA265 (SA 516 GR.70 + INCOLOY 825) SIZE: LEGTH: 9200 X WIDTH: 2500 X THK: (18.00 + 3.00)MM (QTY: 2 PCS)

 

Incoloy 825 Plate Sizes
Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.600"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

Stock List of AMS 5542 Incoloy Alloy 825 Hot and Cold Rolled Sheet/Plate
Alloy Product form Dimension
ALLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, hard 0.40x5 mm x coil, 0.016 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, hard rolled, special temper 0.40x25 mm x coil, 0.007 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, hard 0.50x5 mm x coil, 0.02 kg/m
ALLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, bright anneal, clean spool 0.60x5 mm x spool, 0.02 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, hard rolled, special temper 0.60x25 mm x coil, 0.011 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, annealed 0.5x914.4 mm x coil, 3.587 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, annealed 0.6x1219 mm x coil, 5.95 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, annealed, bellows quality 0.7x1219 mm x coil, 6.70 kg/m
INCOLOY 825 (42 Ni /22Cr/3 Mo) Sheet; cold rolled, annealed 0.8x1220 mm x coil, 7.76 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, annealed 1.0x1219 mm x coil, 9.5 kg/m
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, pickled, annealed 1.6x1200x3000 mm, 46.4 kg/pc
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, pickled, annealed 2.0x1200x3000 mm, 60.15 kg/pc
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Sheet; cold rolled, soft annealed,descaled, sheared 3.0x1200x3000 mm, 88.5 kg/pc
ALLOY 825 (42 Ni/22 Cr/3 Mo) Plate; hot rolled, soft annealed, descaled, sheared 4.0x2440x6000 mm, 482 kg/pc
INCOLOY 825 (42 Ni/22 Cr/3 Mo) Plate; hot rolled, descaled, annealed 5.0x2000x6000 mm, 539 kg/pc
ALLOY 825 (42 Ni/22 Cr/3 Mo) Strip; cold rolled, hard 1.0x5 mm x coil, 0.039 kg/m
ALLOY 825 (42 Ni/22 Cr/3 Mo) Plate; hot rolled, descaled, annealed 18.0x260x260 mm, 9.9 kg/pc

 

Dimensions chart of Incoloy 825 Plate

ASTM B424 Alloy 825 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

 

825 Alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

Weight per Unit of Alloy 825 Plate
Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Our Clients in Following countries and states of Incoloy 825 Plate
Philippines, Indonesia, Dammam -KSA, Belgium 8825 Alloy Steel Plate 2.4858 Nicr21mo
Europe, France, Qatar, Thailand ASTM B424 General Engineering Alloy Incoloy 825 Nickel Sheet for Air Heat Exchanger
Thailand, Germany, Czechia, Malaysia Incoloy 825 Nickel Alloy Sheet
 Bangladesh, USA, Malaysia, Finland Nickel Alloy Inconel 825 / Incoloy 825 Sheet
Kuwait, Saudi Arabia (KSA), South Africa, Brazil Incoloy 825 Nickel Alloy Discs for Tubesheets
Singapore, South Africa, Bahrain Incoloy 825 Plates/Sheets/Coils/Strips (UNS N08825, 2.4858, Alloy 825)
UK, Australia, Philippines, Nigeria Nickel Based Alloy Inconel 825 High Temperature Alloy Steel Coil Strip Sheet Plate
Hong Kong,  Malaysia, Oman, UAE Nickel Alloy Plate Astm B424 / Uns No8825 Incoloy 825 Sheet
Iran, Italy, Chile, Singapore Special nickel alloy incoloy 825 plate
Norway,  Turkey, United Arab Emirates (UAE), Malaysia nickel special alloy Incoloy 825 sheet/plate heating element
Russia,  Malaysia, Netherlands, Dubai incoloy 825 UNS NO8825 W.Nr.2.4858 nickel alloy sheet /plate
Mexico, Spain, Egypt, UK Incoloy Alloy 825 (UNS N08825) Corrosion Resistant Nickel Alloy Plate Sheet
Malaysia, Europe, United Kingdom -UK, UAE ASTM B423 Incoloy 825 UNS N08825 plate sheet for heater exchange
Poland, Canada, UK, Ellington -United States Incoloy 825 UNS NO8825 High Temperature Resistant Nickel Alloy Steel Plate / Sheet
 Canada, Malaysia, Philippines, Singapore Incoloy 825 Nickel Alloy Plate
Romania,  Japan, Europe, Malaysia Incoloy 825 Heat Corrosion Resistant Nickel Alloy Plate
Malaysia, Colombia, Sweden, China Heat Resistant Nickel Alloy Incoloy 825 Plate Chrome Nickel Nichrome Alloy Sheet
 Los Alamos -Mexico, Taiwan, Malaysia, Philippines Incoloy 825 Hot Dipped Galvanized Steel Coil
NY 12203 (USA), South Korea,  Singapore, Malaysia Incoloy 825 nickel sheet and plate

 

Shortest delivery time in Din 2.4858 Shim Sheet, View updated Nickel Alloy 825 Cold Rolled Plate Price in Mumbai

 

Comparision Between Inconel and Incoloy

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Composition of Inconel

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Incoloy

Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies.

Incoloy Compositions (percentages)

Alloy name Balance
metal
Chro
mium
Alu
minum
Tita
nium
Carbon Yttrium oxide Copper Man
ganese
Cobalt Nickel Phos
phorus
Silicon Sulphur Moly
bdenum
Nb
+Ti
020 Fe (~40%) 20 n/p n/p <0.07 n/p 3.5 <2.0 n/p 35 <0.045 <1.0 <0.035 2.5 about 1
DS Fe (~40%) 18 n/p 0.2 0.1 nil 0.5 0.8-1.5 18 (Co+
Ni
38)
18 (Co+
Ni
38)
n/p 2.3 0.03
MA956 Fe (~75%) 20 4.75 0.4 <0.1 0.5 <0.15 <0.3 <0.3 <0.5 <0.02 n/p n/p


Ready Stock of Alloy Incoloy 825 Plate
Types of Incoloy 825 Plate we stock:
825 Incoloy Plates UNS N08825 Rolling Plates
Din 2.4858 Chequer Plates Nickel Alloy 825 Tread Plates
UNS N08825 Incoloy 825 Cold Rolled Plates Alloy 825 Bbq Plates
Alloy 825 Hot Rolled Plates ASTM B424 Alloy 825 Perforated Plates
Alloy 825 inconel Clad Plates UNS N08825 Tisco Plates
ASTM B424 Alloy 825 Chequered Plates Alloy 825 Quarto Plates
Alloy 825 Embossed Plates 825 Alloy Plasma Cutting Plates
Din 2.4858 Plates Brushed Finish Incoloy 825 Superalloy Hot Rolled Sheet
Alloy Incoloy 825 Plates Mill Finish Din 2.4858 Thin Plates
ASTM B424 Alloy 825 Plates 2b Finish Alloy 825 inconel Diamond Plates
Nickel Alloy 825 Plates Mirror Finish Alloy 825 Chequered Plates
UNS N08825 Checker Plates Din 2.4858 Polished Plates
Alloy 825 Custom Cut Plates Alloy 825 Sheet
Alloy 825 10mm Plates Alloy 825 Cold Rolled Sheet
825 Superalloy 1/4 Inch Plates 2.4858 Perforated Sheet
2.4858 Checkered Plates ASTM B424 Alloy 825 Laser Cut Plates

 

Features of Din 2.4858 Plate
  • Permission for pressure-vessel use at wall temperatures up to 800°F
  • Good mechanical properties at both room and elevated temperatures up to approximately 1000°F
  • Good resistance to stress-corrosion cracking
  • Satisfactory resistance to localized attack like pitting and crevice corrosion
  • Very resistant to sulfuric and phosphoric acids
  • Excellent resistance to reducing and oxidizing acids

 

uses of UNS N08825 plate
  • Radioactive waste handling
  • Oil and gas recovery
  • Hot vessels for food, water, and seawater
  • Nuclear fuel reprocessing
  • Pickling tank heaters, tanks, and equipment
  • Calorifiers
  • Pollution control
  • Chemical processing
  • Marine exhaust systems
  • Acid production

 

Call for small piece of 825 Inconel Strip Tape and Slitting Coil Material to test before buying