incoloy 800 Plate specification
| Range | 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH |
| Standard | ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443, UNS N06600 / Werkstoff Nr. 2.4816 |
| Type | Sheet, Plates, Flat, Strips, Profile, Blank ,Circle, Ring etc. |
| Length | Single Random, Double Random & Cut Length |
| End | Plain End, Bevelled End, Threaded |
| Grade | Incoloy 800 Sheets – UNS N08800, Incoloy 800H / HT Plates – UNS N08810 |
| STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN | OR |
|---|---|---|---|---|---|---|---|---|
| Incoloy 800 | 1.4876 | N08800 | ЭИ670 | Z8NC32-21 | NCF 800 | NA 15 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | ЭИ670 | Z8NC33-21 | NCF 800H | NA 15(H) | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | ЭИ670 | - | NCF 800HT | NA 15(HT) | X8NiCrAlTi32-21 | XH32T |
inconel 800 Plate Chemical Composition
Incoloy |
800 |
800H |
800HT |
Ni |
30-35 |
30-35 |
30-35 |
Fe |
39.5 min |
39.5 min |
39.5 min |
Cr |
19-23 |
19-23 |
19-23 |
Cu |
0.75 max |
0.75 max |
0.75 max |
Ti |
0.15-0.60 |
0.15-0.60 |
0.25-0.60 |
Al |
0.15-0.60 |
0.15-0.60 |
0.85-1.20 |
C |
0.1 max |
0.05-0.1 |
0.06-0.1 |
Mn |
1.5 max |
1.5 max |
1.5 max |
S |
0.015 max |
0.015 max |
0.015 max |
Si |
1.0 max |
1.0 max |
1.0 max |
incoloy 800 Plate Mechanical Properties
Density |
7.94 g/cm3 |
Melting Point |
1385 °C (2525 °F) |
Tensile Strength |
Psi – 75,000 , MPa – 520 |
Yield Strength (0.2% Offset) |
Psi – 30,000 , MPa – 205 |
Elongation |
30 % |
Size chart of Incoloy 800 Plate
Stocked Sizes |
|
|---|---|
Size (in inches) |
Size (in mm) |
.125" |
3.18mm |
.134" |
3.40mm |
.156" |
3.96mm |
.187" |
4.75mm |
.250" |
6.35mm |
.312" |
7.92mm |
.375" |
9.53mm |
.500" |
12.7mm |
.600" |
15.9mm |
.750" |
19.1mm |
.875" |
22.2mm |
1" |
25.4mm |
1.125" |
28.6mm |
1.250" |
31.8mm |
1.500" |
38.1mm |
1.750" |
44.5mm |
2" |
50.8mm |
2.500" |
63.5mm |
3" |
76.2mm |
Dimensions of Incoloy 800 Plate
ASTM B409 Alloy 800 Plate Imperial Dimensions
| Plate Surface finish | Gauge (in) | Width (max in) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Polished plate (not brushed) | 11–24 | 60 |
| Temper rolled plate Mexinox only | 13–29 | 48 |
ASTM B409 800 Alloy Plate Metric Dimensions
| Plate Surface finish | Thickness (mm) | Width (max mm) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
| 2D – Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| Polished, brushed plate | 0.5–4.0 | 1524 |