Hastelloy C276 Plate

 

ASTM B575 UNS N10276 Sheet & Strip Suppliers in India

Hastelloy C276 Plate
Hastelloy C276 Plate
ASTM B575 UNS N10276 Strip
ASTM B575 UNS N10276 Strip
Nickel Alloy C276 Sheet
Nickel Alloy C276 Sheet

 

hastelloy plate suppliers, we supply custom sizes Duplex Steel DIN 2.4819 Foil, Don't spend extra for size of ASME SB575 Nickel Alloy C276 Coil

 

Despite the fact that there are many Hastelloy versions of the nickel-based element. Hastelloy C276 SB575 4mm Thick Plate is by far the most commonly used alloy in different industries. The 2.4819 Alloy C276 Flat Plate is typically used in areas with extreme conditions. . As a consequence, the Haynes Alloy C276 N10276 Polished Plate is used in sectors such as pulp and paper manufacturing, chemical refining, emissions management, industrial and residential waste disposal, and sour natural gas recovery in sour wells.

ASTM B575 UNS N10276 Hastelloy C276 Sheet is widely used in a variety of sectors, which include petrochemicals, chemical oil and gas, power production, pharmaceuticals, pulp and paper processing, and wastewater treatment. Hastelloy C276 Coil has a high tolerance to matching, stress degradation, and oxidising conditions. ASME SB 575 UNS N10276 content is often resistant to salt water corrosion in crevice environments, which may trigger aggressive assault in other products which are used on a large scale. UNS N10276 plate is normally remedy heat-treated at 2050 degrees Fahrenheit and easily quenched.

 

Table Of Content

 

Price of Alloy C276 Plate in India
Description Price list of Hastelloy C276 Plate in India
Hastelloy C276 Sheet Plate US $ 9.85-11.52 / KG
Hastelloy C276 Nickle-Based Alloy Steel Plate Excellent Corrosion Resistance US $ 1000-2500 / Ton
Hastelloy C276 Nickel Alloy Plate US $ 100-400 / Ton
Plate Heat Exchanger Plate N35 for Hydrochloric Acid Hastelloy C276 US $ 3-100 / Piece
Nickel Based Alloy Hastelloy C276 Uns N10276 W. Nr 2.4819 High Temperature Alloy Steel Sheet Plate US $ 30000 / Ton
0.1mm Hastelloy C276 Strip US $ 80 / KGS
Nickel Alloy Hastelloy C276 0.1mm Thickness Strip Coil Foil Steel Plate  US $ 2 / Piece
Corrosion-Resistant Hastelloy C276 Nickel Alloy Plate for Flue Gas Equipment US $ 16-26 / Ton
Steel Plate/Steel Hastelloy C276 (ALLoy C276/N10276/2.4819) Cdfl1077 US $ 23 / Piece

If it's not too much trouble, note This is an estimated Cost of C276 Hastelloy Sheet in India. For best Price purchase directly from Hastelloy C276 Plate Suppliers In India, check latest ASTM B575 Alloy C276 Plate price list & stock sizes if it's not too much trouble, mail us.

 

Manufacturing Process of Hastelloy C276 Plate

 

Specification table of Hastelloy C276 Plate
Type Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
Grade Hastelloy C276 - ALLOY C-276 (Ni/ 15Cr/ 16Mo/ 4W)-UNS N10276 , ASTM B575 UNS N10276
UNS N10276 Plate Length 0-12mm or as required
Specification of Alloy C276 Plate ASTM B575 UNS N10276, ASME SB575, MSRR, BS, AMS 4544 sheet
ASTM B575 Alloy C276 Plate Width 0-2500mm or as required
Plate Thickness 0.3 to 1200 mm or as required
C276 Hastelloy Plate Process Hot/ Cold Rolled
Plate surface No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B575 Alloy C276 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.

 

Other Hastelloy C276 Plate Information for buyers

ASTM B575 Alloy C276 Plate, Sheet and Strip
ISO 6208, ASTM B 575/B 906 & ASME SB 575/SB 906, VdTÜV 400/12.98, DIN 17750,
Tolerances of width and thickness
  • EN 10258 (formerly DIN 59381)
  • EN 10151 ASTM B575 Alloy C276 strip for springs
  • EN 10088 ASTM B575 Alloy C276 strip (general)
Hastelloy C276 Plate standards and approvals
  • EN ISO 18286
  • EN 10051
  • EN 10088-1
  • ISO 15510
  • EN ISO 9445
  • ASTM A 480
  • ASTM A 959
  • ASME IID
Standard 2.4819 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Cold rolled C276 Hastelloy Plate 0.5-6.4 mm
  • Hot rolled C276 Hastelloy Plate 3.0–10.0 mm
Alloy C276 Plate Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B575 Alloy C276 Sheet suppliers
Availability of Nickel Alloy C276 Foil sizes Thickness : 8-100 microns (0.00031-0.004 in)
Width: Up to 500 mm (19.5 in)
Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Plasma profiles As per customer's drawings
Value added services for Hastelloy C276 Plate Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.
UNS N10276 Plate Manufacturer in india
  • ASTM B575 Alloy C276 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • C276 Hastelloy Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • Alloy Hastelloy C276 Clad plate: Alloy Hastelloy C276 Clad plate is a composite steel plate made by bonding UNS N10276 Hastelloy C276 plate, etc.
  • ASTM B575 Alloy C276 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
DIN 2.4819 Plate Origin Indian Origin, European Origin, Japanese Origin
Packing of C276 Alloy plate Bundles with waterproof cloth outside or plywood box
services for Hastelloy Alloy C276 Coil
  • Cut-to-length
  • Slitting
  • Polishing
  • Blanking
Test UT, SGS testing, TUV etc
dealers & distributors are located in Abu Dhabi, Port-of-Spain, Pimpri-Chinchwad, New Delhi, Gimhae-si, Jamshedpur, Howrah, Kolkata, Tehran, Gurgaon Surat, Caracas, Istanbul, Thiruvananthapuram, Hyderabad, Santiago, Melbourne, Lagos, Calgary, Manama, Bogota, Janeiro, Ahvaz, Courbevoie, Sydney, India, Baroda, Ernakulam, Noida, Ludhiana, Mexico Rajkot, Ranchi, Bengaluru, Riyadh, Ankara, Vadodara, Montreal, Ahmedabad, London, Chennai, Tau, Perth, Karachi, Kuwait, Kanpur, Gujarat, Muscat, Dammam, Ludhiana, Mumbai, Khobar, Nagpur,Indore, Coimbatore, Bangalore
Why buy UNS N10276 Plate from Jignesh Steel ?
  • Free quote
  • Free sample
  • EN 10204 3.1
  • Mill Test Certificate is supplied with shipment.
  • NABL Approved Lab Reports
  • Any third party inspection is accepted.
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Minimum Nitrogen content and Ferrite Count Test

 

What is Hastelloy C276 Plate?

The materials used to make Hastelloy C-276 UNS N10276 Cold Rolled Plate must meet not only the chemical specifications, but also the mechanical requirements which have been stated in the ASTM B575 norm. When it comes to the mechanical properties of Hastelloy c276 Plate, this alloy must meet the requisite tensile properties. Various forms such as foils, sheets, strips, clad plate, coils, and other shapes and sizes.

 

Hastelloy C276 Plate Suppliers
ASTM B575 Alloy C276 Sheet
ASTM B575 Alloy C276 Sheet
600  Inconel Plate
C276 Hastelloy Plate
Alloy Hastelloy C276 Coil
Alloy Hastelloy C276 Coil
UNS N10276 Hastelloy C276 Foil
UNS N10276 Hastelloy C276 Foil
Hastelloy C276 Superalloy Mesh Plate
Hastelloy C276 Superalloy Mesh Plate
Nickel Alloy C276 Checker Plate
Nickel Alloy C276 Checker Plate
2.4819 Hastelloy C276 Hot Rolled Plate
2.4819 Hastelloy C276 Hot Rolled Plate
Nickel Alloy C276 Cold Rolled Plate
Nickel Alloy C276 Cold Rolled Plate
ASTM B575 Alloy C276 Strip
ASTM B575 Alloy C276 Strip
600  Inconel Shim Sheet
C276 Hastelloy Shim Sheet
Alloy Hastelloy C276 Strip Tape
Alloy Hastelloy C276 Strip Tape
UNS N10276 Hastelloy C276 Chequered Plate
UNS N10276 Hastelloy C276 Chequered Plate
ASTM B575 Alloy C276 Perforated Sheet
ASTM B575 Alloy C276 Perforated Sheet
Alloy Hastelloy C276 Shim Stock
Alloy Hastelloy C276 Shim Stock
Alloy C276 Hastelloy Clad Plate
Alloy C276 Hastelloy Clad Plate
Hastelloy C276 Din 2.4819 Cold Rolled Sheet
Hastelloy C276 Din 2.4819 Cold Rolled Sheet

 

melting range of Alloy C276 Plate
UNS N10276 Hastelloy C276 Plate melting range
  • °F : 2415-2500
  • °C: 1325-1370

 

ASTM B575 Alloy C276 Sheet, Plate & Foil Difference
  • Thickness greater than 6.35 mm is called a Hastelloy C276 Plate.
  • Thickness less than 0.15mm is called a Hastelloy C276 Foil.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Hastelloy C276 Sheet.

 

density of Hastelloy C276 Plate

ASTM B575 Alloy C276 Plate density
  • lb/in3 : 0.321
  • g/cm3 :8.89

 

thickness tolerance chart of Nickel Alloy C276 plate

Tolerances on thickness of steel plates

                                              Tolerance over and under nominal thickness t (mm)
Width w (mm) 2.5<t <4.5 4.5<t <6.0 6.0<t <8.0 8.0<t <10.0 10.0<t <12.5 12.5<t <16.0 16.0<t <20.0  20.0<t <25.0 25.0<t <30.0 30<t <40.0
w < 1200 0.20  0.23 0.30 0.32 0.35 0.80 0.80 0.80 1.0 1.4
1200< w <1500 0.20 0.25 0.30 0.35 0.38 0.80 0.80 0.90 1.0 1.4
1500< w <1800 0.20 0.28 0.32 0.38 0.40 0.80 0.80 0.90 1.1 1.5
1800< w <2100 0.20     0.30      0.36     0.40     0.45      0.80      0.80      0.90      1.1         1.5        
2100< w <2400   0.80 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.5
2400< w <2700   0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.3 1.7
2700< w <3000   0.80 0.90 1.0 1.0 1.0 1.1 1.3 1.4 1.8

 

Tolerances on length of plates
                                                                                                     Tolerance(mm)                                 
Nominal length (mm)                                         Minus Plus
L < 2,000 0                                                   10                                                     
2,000 L < 8,000 0 0.005 times L
L > 8,000 0 40

  

Tolerances on width of plates
                                                                                                 Tolerance (mm)
  Trimmed edge                                                Mill edge                                              
Nominal width (mm) Minus Plus Minus Plus
w < 1200 0 3 0 20
1200 < w < 1500 0 5 0 20
w > 1500 0 5 0 20

 

Check specification & price list of C276 Hastelloy Chequered and 4mm Thick Plate and Perforated Sheet Ex Mumbai

 

Equivalent of Hastelloy C276 Plate
STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

 

Properties of Alloy C276 Plate

Hastelloy C276 Plate Chemical Composition
Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

  

UNS N10276 Plate Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Material Ultimate Tensile (min) Yield Strength (Min) Elongation % Hardness Rb
Ksi Mpa Ksi Mpa
C276 Plate 107.4 741 50.3 347 67 89
C276 Sheet 115.5 796 54.6 376 60 86

 

hs code of ASTM B575 C276 Hastelloy Plate
HS Code Description
75062000 NICKEL ALLOY PLATES CONF. TO SPECN.SB-575 UNS-N10276 HASTELLOY C-276 SIZE(MM): 16 X 2000 X 7500
75062000 NICKEL ALLOY PLATES CONF. TO SPECN.SB-575 UNS-N10276 HASTELLOY C-276 SIZE(MM): 16 X 2000 X 7500
75062000 NICKEL ALLOY PLATES CONF. TO SPECN.SB-575 UNS-N10276 HASTELLOY C-276 SIZE(MM): 16 X 2000 X 7410
75062000 NICKEL ALLOY PLATES CONF. TO SPECN.SB-575 UNS-N10276 HASTELLOY C-276 SIZE(MM): 16 X 2000 X 7500
75062000 NICKEL ALLOY PLATE HASTELLOY C 276 0.6*385*940 mm (40 PCS)
75062000 NICKEL ALLOY PLATES CONFORMING TO SPECIFICATION SB-575 UNS-N10276 HASTELLOY C-276 (40217682) (DIM. : 16 X 150 X 500 MM)
75062000 NICKEL ALLOY PLATES CONFORMING TO SPECIFICATION SB-575 UNS-N10276 HASTELLOY C-276 (40217680) (DIM. : 16 X 150 X 250 MM)
75062000 HASTELLOY(R) C-22(R) ALLOY UNTRIMMED (PLATE) - ITEM# 227732UNTAD0126 ( 1 PC )
75062000 HASTELLOY(R) C-276 ALLOY UNTRIMMED (PLATE) - ITEM# 276032UNTAD0126 ( 1 PC )
75062000 HASTELLOY(R)C - 276 ALLOY PLATE 1 IN THK, 16.5400 IN WIDE, 24.8000 IN LONG NICKEL ALLOY

 

Hastelloy C276 Plate Sizes
Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.600"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

Stock List of Hastelloy Alloy C276 Hot and Cold Rolled Sheet/Plate/
Alloy Product form Dimension
ALLOY C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 0.4x914.4 mm x coil, Weight=3.10 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 0.5x1000 mm x coil, 4.4 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 0.7x1219 mm x coil, 7.7 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled 0.965x1219x3657 mm, 38.25 kg/pc
INCONEL C-276 (Ni/15Cr/16 Mo/4W) Sheet; cold rolled, solution annealed 1.0x1219 mm x coil, 10.8 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 1.5x1220x3000 mm, 48.5 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 1.6x1220x3000 mm, 52.0 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed 2.0x1220x3000 mm, 63.0 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W) Sheet; cold rolled, solution annealed, pickled 3.0x1220x3000 mm, 99.0 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W) Sheet; CR, Pkl, solution annealed, 4.0x1200x3000 mm, 134 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W) Plate; hot rolled, descaled, sol annealed, sheared 6.0x2000x6000mm, 664 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W) Plate; hot rolled, sol annealed, descaled, sheared 8.0x2000x6000 mm, 902 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W) Plate; hot rolled 12.0x1000x1000 mm, 107 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W) Plate; hot rolled 25.0x1200x3000mm, 198 kg/pc

 

Dimensions chart of Hastelloy C276 Plate

ASTM B575 Alloy C276 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

 

C276 alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

Weight per Unit of Alloy C276 Plate
Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Following countries prefer to buy Hastelloy C276 Plate material from India
Philippines, Iran, Chile, Canada C276 Special Nickel Alloy Hastelloy Plate
Romania, Europe, United Arab Emirates (UAE), Norway Corrosion Resistant Hastelloy C276 Explosive Welding Vessel Steel Plate
Netherlands, Sweden, Russia, Malaysia Nickel Alloy Hastelloy C276 Plate/Sheet Price
Malaysia, Mexico, Egypt, Los Alamos -Mexico Precision Nickel Base Aalloy Hastelloy C276 Sheet and Plate with Low Price
Singapore, Malaysia, United Kingdom -UK, NY 12203 (USA) Nickel Based Alloy Hastelloy C276 Uns N10276 High Temperature Alloy Steel Sheet Plate
Dammam -KSA, Poland, UK, Philippines N10276/2.4819/Alloy C276 Hastelloy Alloy Plate
Qatar, Singapore, Europe, Malaysia Corrosion Resistant Hastelloy C276 Explosive Welding Vessel Steel Plate
Czechia, Japan, Thailand, Malaysia, Jakarta, Hastelloy C276/N10276/2.4819 Nickel Alloy Sheet/Plate with ASTM Standard
Bangladesh, Malaysia, Colombia, China Hastelloy C276 Plate Heat Exchanger Plate Supplier for T20m/T20p/T20s/T20MW/Ts6m/Ts20m Plate
South Africa, Taiwan, Philippines, Kuwait Hastelloy C276 Heat Exchanger Replacement Plate
 Bahrain, South Korea, Malaysia, Singapore Special Alloy Nickel Steel Hastelloy C276 Plate
Philippines, Indonesia, Belgium, UK Nickel Alloy Hastelloy C276 0.1mm Thickness Strip Coil Foil Steel Plate Price
Oman, France, Thailand, Hong Kong ASTM Hastelloy C276 Steel Plate
Malaysia, Germany, Turkey Hastelloy C276 Plate for Chemical Industry Heat Exchanger Plate
Dubai,  USA, Finland, Malaysia Uns N10276 Alloy Sheet DIN 2.4819 Hastelloy C276 Nickel Plate
UK, Saudi Arabia (KSA), Brazil, Spain Precision Nickel Base Alloy Hastelloy C276 Sheet and Plate
UAE, South Africa, Singapore, Europe Hastelloy C276 (2.4819 N06455) Stainless Steel Plate
Ellington -United States, Australia, Nigeria, Canada Hastelloy C276 Alloy Plate ASME Sb 575 Nickel Alloy
Singapore,  Malaysia, UAE, Italy High Temperature Hastelloy C276 Steel Sheet Plate

 

Keep Hastelloy C276 Grade Shim sheet stock with 2B/ BA/ HL/ NO.1 finish at factory price, view hastelloy c276 plate weight calculator

 

Comparision Between Inconel and Hastelloy

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Composition of Inconel

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Hastelloy

Hastelloy® could be a trademark for a series of high-strength, nickel based, corrosion resistant alloys created by Haynes Worldwide.

Hastelloy Melting Point, Density and Tensile Strength

  Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %
C276 8.89 g/cm33 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40%
B2 9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
B3 9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
C4 8.64 g/cm3 1350-1400 °C 783 365 55%
Hybrid BC1 8.83 g/cm³ 1343 - 1443°C 725 310 40%
X 8.22 g/cm³ 1355°C 655 MPa 240 MPa 35%


Ready Stock of Alloy Hastelloy C276 Plate
Types of Hastelloy C276 Plate we stock:
C276 Hastelloy Plates UNS N10276 Rolling Plates
Din 2.4819 Chequer Plates Nickel Alloy C276 Tread Plates
UNS N10276 Hastelloy C276 Cold Rolled Plates Alloy C276 Bbq Plates
Alloy C276 Hot Rolled Plates ASTM B575 Alloy C276 Perforated Plates
Alloy C276 Hastelloy Clad Plates UNS N10276 Tisco Plates
ASTM B575 Alloy C276 Chequered Plates Alloy C276 Quarto Plates
Alloy C276 Embossed Plates C276 alloy Plasma Cutting Plates
Din 2.4819 Plates Brushed Finish Hastelloy C276 Superalloy Hot Rolled Sheet
Alloy Hastelloy C276 Plates Mill Finish Din 2.4819 Thin Plates
ASTM B575 Alloy C276 Plates 2b Finish Alloy C276 Hastelloy Diamond Plates
Nickel Alloy C276 Plates Mirror Finish Alloy C276 Chequered Plates
UNS N10276 Checker Plates Din 2.4819 Polished Plates
Alloy C276 Custom Cut Plates Alloy C276 Sheet
Alloy C276 10mm Plates Alloy C276 Cold Rolled Sheet
C276 Superalloy 1/4 Inch Plates 2.4819 Perforated Sheet
2.4819 Checkered Plates ASTM B575 Alloy C276 Laser Cut Plates

 

Features of Din 2.4819 Plate
  • Excellent corrosion resistance in reducing environments
  • One of few materials to withstand the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide
  • Exceptional resistance to strong solutions of oxidizing salts, such as ferric and cupric chlorides
  • Resistance to localized corrosion such as pitting and stress-corrosion cracking
  • Low carbon content which minimizes grain-boundary carbide precipitation during welding to maintain resistance to corrosion in heat-affected zones of welded joints
  • High nickel and molybdenum contents providing good corrosion resistance in reducing environments

 

uses of UNS N10276 plate
  • Equipment for processes utilizing halide or acid catalysts.
  • Digesters and bleach plants in the paper industry.
  • Equipment for flue-gas desulfurisation plants.
  • Sulfuric acid reactors.
  • Evaporators, heat exchangers, filters and mixers used in sulfuric acid environments.
  • Components exposed to sour gas.
  • Organic chloride process equipment.

 

buy Cut Lengths of Alloy Hastelloy C276 Hot rolled and Cold Rolled Plate with to Mill Test Certificate from manufacturer in india