Hastelloy C22 Plate

 

ASTM B575 UNS N06022 Perforated Sheet and strips Suppliers in india as per International Standard

Hastelloy C22 Plate
Hastelloy C22 Plate
ASTM B575 UNS N06022 Strip
ASTM B575 UNS N06022 Strip
Nickel Alloy C22 Sheet
Nickel Alloy C22 Sheet

 

ASME SB575 DIN 2.4602 Coil and Foil Manufacturer in india, see Alloy C22 Sheet Price in Mumbai

 

This famous nickel steel alloy boasts exceptional tolerance to a wide range of oxidising aqueous media, including oxidising acids containing chlorine ions, nitric acid mixtures, and wet chlorine.ASTM B575 is a standard that applies to Hastelloy C22 plate, sheet, and strips made from low carbon, nickel-based alloys. The Haynes Alloy C22 Shim Stock is one such alloy, which, in addition to being a low carbon metal, includes elements such as nickel, chromium, and molybdenum.

The materials used in the ASTM B575 stated Hastelloy C22 Grade Strip Tape must meet the appropriate chemical composition as well as the mechanical specifications. For example, in terms of mechanical property specifications, the 2.4602 Hastelloy C22 Sheet must meet the ASTM B575 specification, which includes properties such as tensile strength, yield strength, elongation, and Rockwell hardness.

These Alloy C22 plates include tungsten, chromium, molybdenum, and iron, making the alloy corrosion resistant in running or stagnant water. Hastelloy Alloy C22 sheets, plates, and coils are available in high performance, corrosion resistant, and high temperature grades.As the properties of Hastelloy C22 alloy strips are broken down, you can find a Nickel-Chromium-Molybdenum-Tungsten alloy that can be quickly welded. While welding, you should use the gas tungsten arc, shielded metal arc, or gas tungsten arc processes since the alloy can accept all three.

 

Table Of Content

 

Specification table of Hastelloy C22 Plate
Type Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
Grade ASME SB575, ASTM B575 UNS N06022, AMS, MSRR, BS
ASTM B575 Alloy C22 Plate Length 0-12mm or as required
Specification of Plate ASTM B575 UNS N06022, ASME SB575, MSRR, BS, AMS 4544 sheet
UNS N06022 Plate Width 0-2500mm or as required
Plate Thickness 0.3 to 1200 mm or as required
Alloy C22Plate Process Hot/ Cold Rolled
Plate surface No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B575 Alloy C22 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.

 

Other Hastelloy C22 Plate Information for buyers

2.4602 Plate, Sheet and Strip
  • DIN: 17744 No. 2.4602 NiCr21Mo14W
  • TÜV: Werkstoffblatt 479 Kennblatt 4635 Kennblatt 4636 Kennblatt 4534
  • Others: NACE MR0175 ISO 15156 ASME Code Case No. 2226-2 Case No. N-621-1
  • SB 575/B 575 P= 43
Tolerances of width and thickness
  • EN 10258 (formerly DIN 59381)
  • EN 10151 ASTM B575 Alloy C22 strip for springs
  • EN 10088 ASTM B575 Alloy C22 strip (general)
Nickel Alloy C22 Plate standards and approvals
  • EN ISO 18286
  • EN 10051
  • EN 10088-1
  • ISO 15510
  • EN ISO 9445
  • ASTM A 480
  • ASTM A 959
  • ASME IID
Standard ASTM B575 Alloy C22 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Cold rolled C22 Hastelloy Plate 0.5-6.4 mm
  • Hot rolled C22 Hastelloy Plate 3.0–10.0 mm
Alloy C22 Plate Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B575 Alloy C22 Sheet suppliers
Availability of UNS N06022 Foil sizes Thickness : 8-100 microns (0.00031-0.004 in)
Width: Up to 500 mm (19.5 in)
Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Plasma profiles As per customer's drawings
Value added services for C276 Alloy Plate Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.
Hastelloy C22 Plate Manufacturer in india
  • ASTM B575 Alloy C22 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • C22 Hastelloy Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • Alloy Hastelloy C22 Clad plate: Alloy Hastelloy C22 Clad plate is a composite steel plate made by bonding UNS N06022 Hastelloy C22 plate, etc.
  • ASTM B575 Alloy C22 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
DIN 2.4602 Plate Origin Indian Origin, European Origin, Japanese Origin
Packing of Hastelloy C22 plate Bundles with waterproof cloth outside or plywood box
services for UNS N06022 Coil
  • Cut-to-length
  • Slitting
  • Polishing
  • Blanking
Test UT, SGS testing, TUV etc
dealers & distributors are located in Port-of-Spain, Abu Dhabi, Gimhae-si, New Delhi, Pimpri-Chinchwad, Baroda, Perth, Istanbul, Manama, Surat, Coimbatore, Jamshedpur, Calgary, Nagpur,Indore, Gurgaon Tehran, Khobar, Bangalore, London, Caracas, Kuwait, Riyadh, Chennai, Ahmedabad, Ludhiana, Ankara, Hyderabad, Ranchi, Santiago, Mumbai, Vadodara, Howrah, Kanpur, Bengaluru, Ernakulam, Bogota, Dammam, Montreal, Ludhiana, Rajkot, Sydney, Tau, Mexico Ahvaz, Courbevoie, Janeiro, Thiruvananthapuram, Noida, Melbourne, Gujarat, Kolkata, Karachi, Lagos, India, Muscat
Why buy Hastelloy Alloy C22 Plate from Jignesh Steel ?
  • Free quote
  • Free sample
  • EN 10204 3.1
  • Mill Test Certificate is supplied with shipment.
  • NABL Approved Lab Reports
  • Any third party inspection is accepted.
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Minimum Nitrogen content and Ferrite Count Test

 

What is Hastelloy C22 Plate?

Hastelloy C22 nickel alloy, also known as C22, is notable for its strong tolerance to chloride-induced pitting. Hastelloy C22 also has a strong tolerance to stress corrosion and crevice corrosion cracking. This material's tungsten and molybdenum content make it resistant to reducing media, although its strong chromium content makes it resistant to oxidising media.

 

Price of Alloy C22 Plate in India
Description Price list of Hastelloy C22 Plate in India
Hastelloy C22 high Nickel Alloy Plate US $ 47-56 / kg
Hastelloy C22 Stainless Steel Plate US $ 2000-3000 / Ton
Nickel Alloy Hastelloy C22 0.1mm Thickness Strip Coil Foil Steel Plate US $ 2 / Piece
Hastelloy C22 Nickel Alloy Plate for Pesticide Production  US $ 20-60 / kg
Hastelloy C22 (Alloy 22 N06022 2.4602) Steel Plate US $ 989-1400 / Ton
Nickel Alloy Hastelloy C22 Plate/Sheet US $ 1600-2500 / Ton
Corrosion Resistant Hastelloy C22 Explosive Welding Vessel Steel Plate US $ 10-50 / Piece
Hastelloy C22 Alloy 22/2.4602 Stainless Steel Plate US $ 989-1400 / Ton
Nickel Alloy Hastelloy C22 Sheet US $ 20-70 / kg

If it's not too much trouble, note This is an estimated Cost of C22 Hastelloy Sheet in India. For best Price purchase directly from Hastelloy C22 Plate Supplier In India, check latest ASTM B575 Alloy C22 Plate price list & stock sizes if it's not too much trouble, mail us.

 

Hastelloy C22 Plate Types
ASTM B575 Alloy C22 Strip
ASTM B575 Alloy C22 Strip
600  Inconel Shim Sheet
C22 Hastelloy Shim Sheet
Alloy Hastelloy C22 Strip Tape
Alloy Hastelloy C22 Strip Tape
UNS N06022 Hastelloy C22 Chequered Plate
UNS N06022 Hastelloy C22 Chequered Plate
Hastelloy C22 Superalloy Mesh Plate
Hastelloy C22 Superalloy Mesh Plate
Nickel Alloy C22 Checker Plate
Nickel Alloy C22 Checker Plate
2.4602 Hastelloy C22 Hot Rolled Plate
2.4602 Hastelloy C22 Hot Rolled Plate
Nickel Alloy C22 Cold Rolled Plate
Nickel Alloy C22 Cold Rolled Plate
ASTM B575 Alloy C22 Perforated Sheet
ASTM B575 Alloy C22 Perforated Sheet
Alloy Hastelloy C22 Shim Stock
Alloy Hastelloy C22 Shim Stock
Alloy C22 Hastelloy Clad Plate
Alloy C22 Hastelloy Clad Plate
Hastelloy C22 Din 2.4602 Cold Rolled Sheet
Hastelloy C22 Din 2.4602 Cold Rolled Sheet
ASTM B575 Alloy C22 Sheet
ASTM B575 Alloy C22 Sheet
600  Inconel Plate
C22 Hastelloy Plate
Alloy Hastelloy C22 Coil
Alloy Hastelloy C22 Coil
UNS N06022 Hastelloy C22 Foil
UNS N06022 Hastelloy C22 Foil

 

hs code of ASTM B575 C22 Hastelloy Plate
HS Code Description
75062000 HASTELLOY(R)C - 22 ALLOY PLATE 0.75 IN THK, 39.3700 IN WIDE, 48.0300 IN LONG NICKEL ALLOY
75062000 HASTELLOY (R) C-22 ALLOY PLATE 0.5 THK, 39.3700 WIDE,48.0300 LONG
75062000 NICKEL ALLOY PLATE HASTELLOY C 276 0.6*385*940 mm (38 PCS)
75062000 ALLOY PLATE HASTELLOY (R) C-22(R) (19.05 x 1.625 x 600MM)
75062000 HASTELLOY (R) C-22 (R) PLATE -227732PLTAD0001 - 4.76 X 1,625 XX 800MM

 

density of Hastelloy C22 Plate

ASTM B575 Alloy C22 Plate density
  • lb/in3 : 0.311
  • g/cm3 : 8.61

 

melting range of Alloy C22 Plate
UNS N06022 Hastelloy C22 Plate melting range
  • °F: 2464-2529
  • °C:1351-1387

 

thickness tolerance chart of Nickel Alloy C22 plate

Tolerances on thickness of steel plates

                                              Tolerance over and under nominal thickness t (mm)
Width w (mm) 2.5<t <4.5 4.5<t <6.0 6.0<t <8.0 8.0<t <10.0 10.0<t <12.5 12.5<t <16.0 16.0<t <20.0  20.0<t <25.0 25.0<t <30.0 30<t <40.0
w < 1200 0.20  0.23 0.30 0.32 0.35 0.80 0.80 0.80 1.0 1.4
1200< w <1500 0.20 0.25 0.30 0.35 0.38 0.80 0.80 0.90 1.0 1.4
1500< w <1800 0.20 0.28 0.32 0.38 0.40 0.80 0.80 0.90 1.1 1.5
1800< w <2100 0.20     0.30      0.36     0.40     0.45      0.80      0.80      0.90      1.1         1.5        
2100< w <2400   0.80 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.5
2400< w <2700   0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.3 1.7
2700< w <3000   0.80 0.90 1.0 1.0 1.0 1.1 1.3 1.4 1.8

 

Tolerances on length of plates
                                                                                                     Tolerance(mm)                                 
Nominal length (mm)                                         Minus Plus
L < 2,000 0                                                   10                                                     
2,000 L < 8,000 0 0.005 times L
L > 8,000 0 40

  

Tolerances on width of plates
                                                                                                 Tolerance (mm)
  Trimmed edge                                                Mill edge                                              
Nominal width (mm) Minus Plus Minus Plus
w < 1200 0 3 0 20
1200 < w < 1500 0 5 0 20
w > 1500 0 5 0 20

 

Call for small piece of 5mm Thick Cold Rolled Nickel Alloy C22 Chequered Plate to test before buying

 

Comparision Between Inconel and Hastelloy

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Composition of Inconel

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Hastelloy

Hastelloy® could be a trademark for a series of high-strength, nickel based, corrosion resistant alloys created by Haynes Worldwide.

Hastelloy Melting Point, Density and Tensile Strength

  Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %
C276 8.89 g/cm33 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40%
B2 9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
B3 9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
C4 8.64 g/cm3 1350-1400 °C 783 365 55%
Hybrid BC1 8.83 g/cm³ 1343 - 1443°C 725 310 40%
X 8.22 g/cm³ 1355°C 655 MPa 240 MPa 35%


Hastelloy C22 Plate Sizes
Stocked Sizes
Size (in inches)
Size (in mm)
.125"
3.18mm
.134"
3.40mm
.156"
3.96mm
.187"
4.75mm
.250"
6.35mm
.312"
7.92mm
.375"
9.53mm
.500"
12.7mm
.600"
15.9mm
.750"
19.1mm
.875"
22.2mm
1"
25.4mm
1.125"
28.6mm
1.250"
31.8mm
1.500"
38.1mm
1.750"
44.5mm
2"
50.8mm
2.500"
63.5mm
3"
76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

 

ASTM B575 Alloy C22 Sheet, Plate & Foil Difference
  • Thickness less than 0.15mm is called a Hastelloy C22 Foil.
  • Thickness greater than 6.35 mm is called a Hastelloy C22 Plate.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Hastelloy C22 Sheet.

 

Dimensions chart of Hastelloy C22 Plate

ASTM B575 Alloy C22 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

 

C22 alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

 

uses of UNS N06022 plate
  • Pharmaceutical industries use alloy C-22 fittings and tubing to avoid contamination caused by corrosion related failures
  • Waste water processing
  • nuclear fuel reprocessing
  • Pesticide production
  • Cellophane manufacturing
  • Chemical process industry in equipment like flue gas scrubbers, chlorination systems, sulfur dioxide scrubbers, pulp and paper bleach plants, pickling systems
  • Incineration scrubber systems
  • Chlorination systems

 

Ready Stock of Alloy Hastelloy C22 Plate
Types of Hastelloy C22 Plate we stock:
C22 Hastelloy Plates UNS N06022 Rolling Plates
Din 2.4602 Chequer Plates Nickel Alloy C22 Tread Plates
UNS N06022 Hastelloy C22 Cold Rolled Plates Alloy C22 Bbq Plates
Alloy C22 Hot Rolled Plates ASTM B575 Alloy C22 Perforated Plates
Alloy C22 Hastelloy Clad Plates UNS N06022 Tisco Plates
ASTM B575 Alloy C22 Chequered Plates Alloy C22 Quarto Plates
Alloy C22 Embossed Plates C22 alloy Plasma Cutting Plates
Din 2.4602 Plates Brushed Finish Hastelloy C22 Superalloy Hot Rolled Sheet
Alloy Hastelloy C22 Plates Mill Finish Din 2.4602 Thin Plates
ASTM B575 Alloy C22 Plates 2b Finish Alloy C22 Hastelloy Diamond Plates
Nickel Alloy C22 Plates Mirror Finish Alloy C22 Chequered Plates
UNS N06022 Checker Plates Din 2.4602 Polished Plates
Alloy C22 Custom Cut Plates Alloy C22 Sheet
Alloy C22 10mm Plates Alloy C22 Cold Rolled Sheet
C22 Superalloy 1/4 Inch Plates 2.4602 Perforated Sheet
2.4602 Checkered Plates ASTM B575 Alloy C22 Laser Cut Plates

 

Weight per Unit of Alloy C22 Plate
Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

View latest price & ready sizes of Haynes Alloy C22 Hot Rolled Plate and Shim Sheet Ex Mumbai

 

Features of Din 2.4602 Plate
  • Resists the formation of grain-boundary precipitates in the weld heat-affected zone
  • Excellent weldability
  • Exceptional resistance to a wide variety of chemical process environments including strong oxidizers such as ferric acids, acetic anhydride, and seawater and brine solutions
  • Excellent resistance to oxidizing aqueous media
  • Resistant to pitting, crevice corrosion and stress corrosion cracking
  • Outstanding resistance to both reducing and oxidizing media

 

Equivalent of Hastelloy C22 Plate
STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 NiCr21Mo14W

 

Properties of Alloy C22 Plate

Hastelloy C22 Plate Chemical Composition
Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max

  

UNS N06022 Plate Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

 

An Indian Manufacturer but Global supplier of Hastelloy C22 Plate, check what and where
Chile, Philippines, Iran, Canada Hastelloy C22 Plate (FM9)
United Arab Emirates (UAE), Europe, Norway, Romania Corrosion Resistant Hastelloy C22 Explosive Welding Vessel Steel Plate
Netherlands,  Sweden, Russia, Malaysia Alloy 22 N06022 Stainless Steel Plate
Egypt, Malaysia, Los Alamos -Mexico Hot Rolled Hastelloy C22 Steel Plate
 NY 12203 (USA), United Kingdom -UK, Singapore, Malaysia Nickel Alloy Hastelloy C22 0.1mm Thickness Strip Coil Foil Steel Plate Price
Poland, Dammam -KSA, Philippines, UK Nickel Hastelloy C22 Alloy Plate
Singapore, Qatar,  Malaysia, Europe Hastelloy C22 Nickel Alloy Plate
Malaysia, Czechia, Japan, Thailand Corrosion Resistance Hastelloy C22 Plate
China,  Malaysia, Colombia, Bangladesh Hastelloy C22 Nickel Alloy Sheet Plate
Philippines, South Africa, Taiwan, Kuwait Nickel Hastelloy Alloy Steel Plate C22
Malaysia, Bahrain, South Korea, Singapore High Density Hastelloy c22 Plate
Belgium, Philippines, Indonesia, UK ASTM B575 Hastelloy C22 Nickel Alloy Plate
Thailand, Oman, France, Hong Kong Hot Rolled Hastelloy C22 Plate
Malaysia, Germany, Turkey Precision nickel base alloy hastelloy c22 sheet and plate

 

buy Nickel Alloy C22 Clad and Mesh Plate, check hardness, equivalent and chemical composition here