Hastelloy B2 Tube

  • Home
  • Hastelloy B2 Tube

 

ASTM B622 Alloy B3 Seamless Tubing Manufacturer and supppliers in india

Hastelloy B2 Tube
Hastelloy B2 Tube
Alloy B2 Tube
Alloy B2 Tube
Hastelloy B3 Tubing
Hastelloy B3 Tubing

 

Buy Uns N10665 Coiled Tubing at the lowest cost, Check online ASTM B626 Alloy B2 welded Tube Price List, standards and grades

 

 Hastelloy b2 tube has a number of advantageous characteristics. For example, the Hastelloy B2 Electropolish Tube has a regulated chemistry with lower chromium and iron contents. The lower the quality of these components in the Hastelloy B2 Decorative Tube, the slower the organised step Ni4Mo. The corrosion tolerance of Hastelloy Alloy B2 EFW Tubes is slightly higher in lowering atmospheres. Hastelloy Uns N10665 Coiled Tubing is classified as a high-performance Alloy with aqueous corrosion resistance.

Hastelloy DIN 2.4617 tubing is resistant to both non-oxidizing and sulphuric acids. Din 2.4617 Heat Exchanger Tube is resistant to chloride ion-induced stress-related corrosion cracking. B2 Hastelloy Condenser Tubes are used in a variety of sectors including food processing, fabrication, oil and gas, and others. Hastelloy B2 Boiler Tube is used in the automobile industry to make hydraulic and pneumatic lines, heat exchangers, and air coolers.

 

Table Of Content

 

Specification table of Hastelloy B2 Tube
  Grade B2 Tube OD Length of Hastelloy B2 tubing Types of Hastelloy B2 Tube Wall thickness  
  1/8” ~ 8” Upto 6 Meters NB Sizes(Ready stock) SCH 10 / SCH 5 / SCH 80 / SCH 40 / SCH 160  
  5.0 millimeter ~ 203.2 millimeter Seamless (As Per need) As per need  
  5.0millimeter ~ 1219.2millimeter Welded (Ready stock + As Per need) 1.0 ~ 15.0 millimeter  
  5.0millimeter ~ 203.2millimeter Sanitary B2 tubing As per need  
The material test report (MTR) will be given with the Hastelloy B2 tubing

 

Hastelloy B2 tube Standards

ASTM B622/ASME SB-622, ASTM B626/ ASME SB-626
International Specification

N10665
Astm B626 Nickel Alloy B2 Welded Tube Size 6.35 mm To 152 mm Outside Diameter
Hastelloy B2 Seamless Tube Size 3.35- 101.6 mm Outside Diameter
Astm B622 Hastelloy B3 Tubing wall thickness 00.020" to 00.220", (as per client need)
Hastelloy B2 Tubing Bwg& Swg 12 , 10 , 16, 14 , 20 , 18 Swg
Tube Length Cut length, Double and Single Random Tube
Types of Hastelloy B2 Tubing ERW, Seamless, Welded, Fabricated, EFW Tube / Tubing
Form ‘ Hollow, U’ bent, LSAW, Hydraulic, Straight Tube, Boiler, Round, Tube Coil, Square, Rectangular Etc
Uns N10665 Tubing Finish AP (Annealed & Pickled), Polished, MF, BA (Bright & Annealed)
Marking All Hastelloy B2 Tubing marking : Grade, Standard, Thickness, OD, Heat No., Length
WERKSTOFF Nr 2.4617 tube End Beveled End, Threaded Tube, Plain End
Service Machining, Polish ( Commercial & Electro), As per your need Draw & Expansion , Annealed & Pickled Bending Etc.
Other Trade name of Hastelloy B2 Tube
  • Nickelvac 800(tm) Tube
  • Nicrofer 3220 LC(tm) Tube
  • VLX800(tm) Tube
  • Sanicro 30(tm) Tube
  • Ferrochronin 800(tm) Tube
  • AL 800(tm) Tube
  • Nicrofer 3220(tm) Tube
  • CM 800H(tm) Tube
Application & uses of Hastelloy B3 Tube Gas Tube, Oil Tube, Heat exchanger Tube, Boiler Tube, Fluid Tube
Pur Hastelloy B2 Tube stockyard Gimhae-si, Pimpri-Chinchwad, Abu Dhabi, New Delhi, Noida, Kanpur, Tau, Melbourne, Bengaluru, Kolkata, India, Port-of-Spain, Calgary, Vadodara, Hyderabad, Gujarat, Nagpur,Indore, Manama, Howrah, Mumbai, Kuwait, Ranchi, Ludhiana, Coimbatore, Khobar, Karachi, Riyadh, Dammam, Ankara, Ernakulam, Muscat, Gurgaon, Lagos, Chennai, Thiruvananthapuram, Courbevoie, Tehran, London, Baroda, Ahmedabad, Perth, Santiago, Jamshedpur, Bogota, Sydney, Istanbul, Ahvaz, Montreal, Caracas, Bangalore, Janeiro, Rajkot, Mexico, Surat
Test Certificate  
from Govt. Approved Lab Test Certificate 
Test Certificate of Manufacturer
Under TPI
Specialize in
  • ASTM B622 Hastelloy B2 Heat Exchanger & Condenser Tube
  • Hastelloy 2.4600 Capillary Tube & Other Odd Size 
Dimension ANSI/ ASME B36.19, B36.10, B2.1 Hastelloy B2 Tube, We can also thread, cut, and groove Hastelloy B3 Tubing to suit your specifications.

 

Price of Alloy B2 Tube
Description Price list of Hastelloy B2 tube in India
ASTM Hastelloy B2 B3 Tube US $ 20-70 / kg
Hastelloy B2 Uns N010665 Alloy B2 Nickel Seamless Tube US $ 47-56 / kg
Heat Exchanger B2 Hastelloy Seamless Tube US $ 50-60 / Meter
Hastelloy B2 with High Purity Steel Tube US $ 800-2500 / Ton
Seamless ASTM B622 Uns N10665 Hastelloy B2 Nickel Alloy Tube US $ 5000-15000 / Ton
B2 Hastelloy Seamless Heat Exchanger Tube US $ 50-60 / Meter
Hastelloy B2/B-2/Uns N10665/2.4617 Seamless Tube US $ 20-60 / kg
Hastelloy B-2 Tubes/Tubings (UNS N10665, 2.4617, Alloy B-2, Hastelloy B2) US $ 1 / Piece
Hastelloy B2 (2.4617 N10665) Stainless Steel Tube US $ 2400-2600 / Ton

If it's not too much trouble, note This is an estimated Cost of  Hastelloy B2 tube in India. Kindly don't hesitate to get in touch with us for Free Quote and most recent Alloy B2 tube Price List in India. Additionally contrast our Price and other ASME SB622  Hastelloy B2 tube suppliers in India & China.

 

What is Tubo Hastelloy B2?

The requirements ASTM B622 Alloy B2 Seamless Tubes and tubing includes nickel and nickel cobalt alloys. According to the standard, these Hastelloy UNS N10675 welded Tubing have been graded into various grades based on their chemical composition. Alloy B3 Seamless Tubing is a molybdenum and nickel alloy. This additional member, Hastelloy B3 Seamless Tube, is considered to have greater hydrochloric acid tolerance at different concentrations and temperatures. Hastelloy b3 tubing can tolerate not only acids such as formic acid, sulfuric acid, and phosphoric acid, but also non-oxidizing acids.

 

Hastelloy B2 Tube Types
Hastelloy 2.4600 Rectangular Tubing
Hastelloy 2.4600 Rectangular Tubing
Hastelloy Alloy B2 Seamless Tube
Hastelloy Alloy B2 Seamless Tube
2.4617 Alloy B2 Seamless Tubing
2.4617 Alloy B2 Seamless Tubing
Nickel Alloy B2 Electropolished Tubing
Nickel Alloy B2 Electropolished Tubing
ASTM B167 Alloy B2 Electropolished Tubes
ASTM B622 Alloy B2 Electropolished Tubes
Alloy B2 Bright Annealed Tube
Alloy B2 Bright Annealed Tube
Small Diameter Hastelloy B3 Tubing
Small Diameter Hastelloy B3 Tubing
ASTM B626 Inconel 625 High Pressure Tubing
ASTM B626 Hastelloy B2 High Pressure Tubing
Hastelloy UNS N10665 Capillary Tube
Hastelloy UNS N10665 Capillary Tube
Hastelloy WERKSTOFF NR. 2.4617 Square Tubing
Hastelloy WERKSTOFF NR. 2.4617 Square Tubing
B2 Alloy Square Tube
B2 Alloy Square Tube
ASTM B167 Inconel 625 Exhaust Tubing
ASTM B622 Hastelloy B2 Exhaust Tubing
Hastelloy DIN NR. 2.4617 ERW Tube
Hastelloy DIN NR. 2.4617 ERW Tube
Inconel 625® ERW Tubing
Hastelloy B2® ERW Tubing
ASTM B626 UNS N10665 Welded Tube
ASTM B626 UNS N10665 Welded Tube
B2 Alloy Round Tube
B2 Alloy Round Tube
ASTM B167 Alloy B2 Tube
ASTM B622 Alloy B2 Tube
Alloy B2 Tubing
Alloy B2 Tubing
ASTM B626 Inconel 625 Instrument Tubing
ASTM B626 Hastelloy B2 Instrument Tubing
Hastelloy B3 Capillary Tubing
Hastelloy B3 Capillary Tubing

 

largest Din 2.4617 Condenser / Heat Exchanger Tube stockist in India, we offer Alloy B3 Erw Tube in almost all sizes

 

Alloy B2 tubing HS Code
HS Code Description
75052200 HASTELLOY (R) B-3 (R) ALLOY,CUT LENGTHS, 0.093 X 36 TIG TUBE,B3-0930-10TT-M00
75052200 HASTELLOYS ( R ) B-3 ( R ) ALLOY CUT LENGTHS 2.4 MM DIA (2 TUBE)

 

Surface Finish of Hastelloy B2 Tube
Code Finish Contact Surface of Non-Product
(Maximum Ra)		 Contact Surface of product
(Maximum Ra)*
-SF Mill Finish Sanitary Finish*
-PL 32 µ-inch (0.8 µm) 20 µ-inch (0.5 µm)
-PU Mill Finish Mill Finish

 

Pressure Rating of Alloy B2 Tubing
Hastelloy B2 Tube O.D.
(in.)		 Wall Thickness of Tube (inches)
.028 .035 .049 .065 .083 .095 .109 .120
Working Pressure (psig)
1/8 7900 10100
1/4 3700 4800 7000 9500
5/16 3700 5400 7300
3/8 3100 4400 6100
1/2 2300 3200 4400
3/4 2200 3000 4000 4600
1 2200 2900 3400 3900 4300

 

Stock List of Hastelloy Alloy B2 Tubing
Thickness of Wall Size Finish inside diameter
(Ra)
(Ra)		 Style of Hastelloy b2 tubing Finish Outside diameter
(Ra)
00.065" (1.651 millimeter) 1” (25.4 millimeter) 20 µ-inch (00.5 µm) Seamless Tubing 32 µ-inch (00.8 µm)
2” (50.8 millimeter) Sanitary Finish* Welded Tubing Mill Finish
¾” (19.05 millimeter) 20 µ-inch (00.5 µm) Seamless Tubing 32 µ-inch (00.8 µm)
3" (76.2 millimeter) Mill Finish Welded Tubing Mill Finish
1½” (38.1 millimeter) Sanitary Finish* Welded Tubing Mill Finish
½” (12.7 millimeter) 20 µ-inch (00.5 µm) Seamless Tubing 32 µ-inch (00.8 µm)

 

ASTM B622 Hastelloy B2 Seamless Tube Weight chart
OD inches Ave. Wall inches D/t Ratio ID inches Tube Cross Sectional Area (in2) Internal Area (in2)
0.250 0.020 12.50 0.210 0.0145 0.0346
0.250 0.028 8.93 0.194 0.0195 0.0296
0.250 0.035 7.14 0.180 0.0236 0.0254
0.250 0.049 5.10 0.152 0.0309 0.0181
0.250 0.065 3.85 0.120 0.0378 0.0113
0.375 0.020 18.75 0.335 0.0223 0.0881
0.375 0.028 13.39 0.319 0.0305 0.0799
0.375 0.035 10.71 0.305 0.0374 0.0731
0.375 0.049 7.65 0.277 0.0502 0.0603
0.375 0.065 5.77 0.245 0.0633 0.0471
0.500 0.020 25.00 0.460 0.0302 0.1662
0.500 0.028 17.86 0.444 0.0415 0.1548
0.500 0.035 14.29 0.430 0.0511 0.1452
0.500 0.049 10.20 0.402 0.0694 0.1213
0.500 0.065 7.69 0.370 0.0888 0.1075
0.500 0.083 6.02 0.334 0.1087 0.0876
0.625 0.020 31.25 0.585 0.0380 0.2688
0.625 0.028 22.32 0.569 0.0525 0.2543
0.625 0.035 17.86 0.555 0.0649 0.2419
0.625 0.049 12.76 0.527 0.0887 0.2181
0.625 0.065 9.62 0.495 0.1144 0.1924
0.625 0.083 7.53 0.459 0.1413 0.1655
0.625 0.095 6.58 0.435 0.1582 0.1486
0.625 0.109 5.73 0.407 0.1767 0.1301
0.750 0.028 26.79 0.694 0.0635 0.3783
0.750 0.035 21.43 0.680 0.0786 0.3632
0.750 0.049 15.31 0.652 0.1079 0.3339
0.750 0.065 11.54 0.620 0.1399 0.3019
0.750 0.083 9.04 0.584 0.1739 0.2679
0.750 0.095 7.89 0.560 0.1955 0.2463
0.750 0.109 6.88 0.532 0.2195 0.2223
0.750 0.120 6.25 0.510 0.2375 0.2043
0.875 0.020 43.75 0.835 0.0537 0.5476
0.875 0.028 31.25 0.819 0.0745 0.5268
0.875 0.035 25.00 0.805 0.0924 0.5090
0.875 0.049 17.86 0.777 0.1272 0.4742
0.875 0.065 13.46 0.745 0.1654 0.4359
0.875 0.083 10.54 0.709 0.2065 0.3948
0.875 0.095 9.21 0.685 0.2328 0.3685
0.875 0.109 8.03 0.657 0.2623 0.3390
0.875 0.120 7.29 0.635 0.2846 0.316L7
1.000 0.028 35.71 0.944 0.0855 0.6999
1.000 0.035 28.57 0.930 0.1061 0.6793
1.000 0.049 20.41 0.902 0.1464 0.6390
1.000 0.065 15.38 0.870 0.1909 0.5945
1.000 0.083 12.05 0.834 0.2391 0.5463
1.000 0.095 10.53 0.810 0.2701 0.5153
1.000 0.109 9.17 0.782 0.3051 0.4803
1.000 0.120 8.33 0.760 0.3318 0.4536
1.000 0.134 7.46 0.732 0.3646 0.4208
1.250 0.035 35.71 1.180 0.1336 1.0936
1.250 0.049 25.51 1.152 0.1849 1.0423
1.250 0.065 19.23 1.120 0.2420 0.9852
1.250 0.083 15.06 1.084 0.316L3 0.9229
1.250 0.095 13.16 1.060 0.3447 0.8825
1.250 0.109 11.47 1.032 0.3907 0.8365
1.250 0.120 10.42 1.010 0.4260 0.8012
1.250 0.134 9.33 0.982 0.4698 0.7574
1.500 0.035 42.86 1.430 0.1611 1.6061
1.500 0.049 30.61 1.402 0.2234 1.5438
1.500 0.065 23.08 1.370 0.2930 1.4741
1.500 0.083 18.07 1.334 0.3695 1.3977
1.500 0.095 15.79 1.310 0.4193 1.3478
1.500 0.109 13.76 1.282 0.4763 1.2908
1.500 0.120 12.50 1.260 0.5202 1.2469
1.500 0.134 11.19 1.232 0.5750 1.1921
1.500 0.148 10.14 1.204 0.6286 1.1385
1.750 0.035 50.00 1.680 0.1886 2.2167
1.750 0.049 40.82 1.902 0.3003 2.8413
1.750 0.065 26.92 1.620 0.3441 2.0612
1.750 0.083 21.08 1.584 0.4347 1.9706
1.750 0.095 18.42 1.560 0.4939 1.9113
1.750 0.109 16.06 1.532 0.5619 1.8433
1.750 0.120 14.58 1.510 0.6145 1.7908
1.750 0.134 13.06 1.482 0.6803 1.7250
1.750 0.148 11.82 1.454 0.7449 1.6604
1.750 0.165 10.61 1.420 0.8216 1.5837
2.000 0.035 57.14 1.930 0.2161 2.9255
2.000 0.049 40.82 1.902 0.3003 2.8413
2.000 0.065 30.77 1.870 0.3951 2.7465
2.000 0.083 24.10 1.834 0.4999 2.6417
2.000 0.095 21.05 1.810 0.5685 2.5730
2.000 0.109 18.35 1.782 0.6475 2.4941
2.000 0.120 16.67 1.760 0.7087 2.4328
2.000 0.134 14.93 1.732 0.7855 2.3561
2.000 0.148 13.51 1.704 0.8611 2.2805
2.000 0.165 12.12 1.670 0.9512 2.1904

 

Comparison Between Inconel and Hastelloy

Inconel

Inconel is a family of austenitic nickel-chromium-based superalloys.

Composition of Inconel

Inconel Element (% by mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
601 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
601 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Hastelloy

Hastelloy® could be a trademark for a series of high-strength, nickel based, corrosion resistant alloys created by Haynes Worldwide.

Hastelloy Melting Point, Density and Tensile Strength

  Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %
C276 8.89 g/cm33 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40%
Hastelloy B2 Tube 9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
B3 9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
C4 8.64 g/cm3 1350-1400 °C 783 365 55%
Hybrid BC1 8.83 g/cm³ 1343 - 1443°C 725 310 40%
X 8.22 g/cm³ 1355°C 655 MPa 240 MPa 35%

 

Size chart of ASTM B626 Hastelloy B2 Welded Tube
( Outside Diameter) Hastelloy B2 Tubes Sizes Thickness of Wall
1/16" , 1/8" , 1/4" 3/16" , 3/8", 5/16" 0.020
1/8" 0.012
1/16" , 1/8" , 3/16" 0.010
1/8" , 3/16" 0.016
1/8" , 1/4" 3/16" , 3/8", 5/16" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/2" , 1 1/4" , 1 5/8" , 2" , 2 1/4" 0.035
1/8" , 1/4" 3/16" , 3/8", 5/16" , 1/2" , 3/4" , 1" , 1 1/2" , 2" 0.028
1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/2" , 1 1/4" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" 0.065
1/4" 3/16" , 3/8", 5/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/2" , 1 1/4" , 1 5/8" , 2" , 2 1/4" 0.049
1/2" , 5/8" , 1 1/4" , 1" , 1 1/2" , 2" 0.095
1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/2" , 1 1/4" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" 0.083
1/2" , 5/8" , 3/4" , 7/8" , 1 1/4" , 1" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" .120
1/2" , 3/4" , 1 1/4" , 1" , 1 1/2" , 2" .109
3/4" , 1 1/4" , 1" , 1 1/2" , 2" , 3" , 3 1/4" .125
3" .250
1" .134
3 1/2" .375

Great Hastelloy B2 Tube suppliers in Mumbai, India offer from thin wall to thick wall these Alloy B2 Tube and Tubing in different size range, DIN NR. 2.4617 tubes in coils or straight lengths.

UNS N10665 ERW Tube Bending

Hastelloy B2 Tube is regularly bent on ordinary tube bending equipment. Mandrel benders are suggested especially for tight bends. Bends made without a mandrel require bigger radii. In the event that more modest radius bends are required, it very well might be important to bend the tubing at 400°-600°F (204°-316°C).

 

We Keep Bulk Stock of Din 2.4600 Round Tube at our stockyard, contact us for Free Sample & stock list

 

Don't Forget to check our material supplied to Qatar, Malaysia and other countries in Europe and America
Indonesia, Philippines, Dammam -KSA, Belgium Excellent Quality Hastelloy B2/Alloy B-2 Stainless Steel tube
France, Europe, Qatar, Thailand ASTM B622 Hastelloy B2 Nickel Based Alloy tube with High Performance
Germany,  Thailand, Czechia, Malaysia Hastelloy B-3/N10675/2.4600 Super Nicle Alloy Tube
USA, Bangladesh, Malaysia, Finland Hastelloy B2 Seamless Nickel Alloy Tubes for Heat Exchanger
Saudi Arabia (KSA), Kuwait, South Africa, Brazil B2 Hastelloy Seamless Tube
South Africa, Singapore, Bahrain Hastelloy B-3 Alloy B3 N10675 Nickel Alloy Tube
Australia, UK, Philippines, Nigeria N10675/2.4600/Hastelloy B-3 Seamless Stainless Steel Tube
Malaysia, Hong Kong, Oman, UAE Hastelloy B2 Seamless Nickel Alloy Tube for Heat Exchanger
Italy, Iran, Chile, Singapore Hastelloy B2 Welded Steel Tube
Turkey,  Norway, United Arab Emirates (UAE), Malaysia Alloy B3 N10665 Hastelloy B2 Stainless Steel Tube
Malaysia, Russia, Netherlands, Dubai Nickel Alloy Hastelloy B2 Tube
Spain, Mexico, Egypt, UK Hastelloy B2 (N10665) Nickel Alloy Tube

 

Hastelloy B3 tube Characteristics
  • Performs excellent ductility during transient exposures to intermediate temperatures
  • Excellent resistance to pitting corrosion and stress-corrosion cracking
  • Thermal stability superior to alloy B2 Tubes
  • Excellent resistance to acetic, formic and phosphoric acids and other non-oxidizing Chemicals
  • Resistance to hydrochloric acid at all concentrations and temperatures
  • Excellent resistance to super heated environment

 

Welding of Tubo Hastelloy B2

Hastelloy B2 Tube might be a nickel-chromium alloys which is used in various welding structures. Hastelloy B2 Tube is most regularly used in techniques where high heat tolerance is required. Welding Inconel can be or possibly troublesome on the grounds that the welds that are made tendency to split, There are some alloys of Inconel that were especially anticipated use in welding like TIG.

Hastelloy B2 tubing welding include 6 steps:
     1. Preparation of pipe ends
     2. Installation of purge dams
     3. Fit-up of pipe sections
     4. Purge pipe weld zone
     5. Tack weld pipe sections
     6. Closure welding

 

Chemical Composition Table of Hastelloy B2 Tube

Ni		 C Mo Mn Si Fe P S Co Cr
Hastelloy B2 Balance 0.02 max 26 – 30 1.00 max 0.1 max 2.0 max 0.04 max 0.03 max 1.0 max 1.0 max
Hastelloy B3 65.0 min 0.01 max 28.5 3.0 max 0.10 max 15 0.2 max 0.03 max 0.20 max 1.5max

 

Mechanical characteristics of Hastelloy B3 Tube
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi – 51000 , MPa – 350 Psi – 1,10,000 , MPa – 760 40 %

 

Material Equivalent Grade of UNS N10665 Tubing
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Hastelloy B2 N10665 2.4617 – – – – –
Hastelloy B3 N10675 2.4600

 

find Uns N10675 High Pressure/Boiler tube Specification and dimensions chart here

 

Hastelloy B2 Tube Ready Stock
2.4617 Alloy B2 Tubes
N10665 nickel alloy Tubes
Hastelloy Alloy B2 tubing
Tube Alloy B2
N10665 alloy tubing
N10665 alloy tube
Alloy B2 Tube
Alloy B2 Tubing
SB622 N10665 Seamless Tubing
SB622 UNS N10665 Tubes
N10665 tubing
Nickel alloy uns N10665 Exhaust Tubing
Nickel Alloy B2 tubing
Hastelloy Alloy B2 tube
Alloy B2 Seamless Tubing
Alloy B2 Seamless Tube
B2 Alloy Tubes
Hastelloy B3 tubing
Inconel N10665 Tubes
UNS 10665 Tubes
Hastelloy Alloy B2 uns N10665 Tubes
2.4617 Hastelloy B2 Tubing
SB622 N10665 Round Tubes
ASTM B622 N10665 Tubes
ASME SB622 Hastelloy B3 Tubes
ASTM B622 Seamless Tube
Hastelloy B2 alloy Tubes
WERKSTOFF Nr 2.4617 tubing
ASTM B622 Alloy B2 Tubes
SB622 Hastelloy B2 Tubes
ASTM B622 N10665 Tubes
B622 N10665 Tubes
ASTM B626 Hastelloy B2 Tubing
Hastelloy 2.4600 Tubing
Hastelloy B2 Chemical process Tube
Alloy B2 Medical Tube
ASTM B622 tube material
ASTM B622 material
ASME SB626 Hastelloy B3 Tubing
ASTM B626 Gr. 600 Tubing
ASME Hastelloy B2 Seamless Tube
Hastelloy B2 Nuclear Tube
SB626 Hastelloy B2 Tubing
ASTM B626 Hastelloy B3 Tubing
Alloy B2 Heat exchanger Tube
B2 Alloy Control lines
Alloy B2 Alloy Tube
ASTM Alloy B2 Decorative Tube
ASTM B626 Hastelloy B3 Capillary Tube
Hastelloy B2 U Shaped Tube
ASME SB626 Hastelloy B3 Instrumentation Tube
Hastelloy B2 Triangle Tube
Alloy B2 High-strength capillary tubing
Alloy B2 Bellows Tube
ASME SB622 Hastelloy B3 precision Tube
Hastelloy B2 Transmission Tube
Hastelloy B3 Alloy Pitot Tube
WERKSTOFF NR. 2.4617 encapsulated coiled tubing
Alloy B2 high precision Tube
Hastelloy B2 Nuclear Control Rod Tube
WERKSTOFF NR. 2.4617 Seamless Tubing
Alloy B2 Gas Tube Ar 15
Alloy B2 Gas Tubing
Alloy B2 Furnace Tube
Alloy B2 cold drawn seamless Tube
Hastelloy B2 Aero engine Tube
Hastelloy B2 Bourdon Tube
ASME SB622 Hastelloy B3 Capillary Tubing
Hastelloy B3 Alloy Precision Tubing
Alloy B2 High Pressure Tube
Alloy B2 Aerospace Engine Tube
Alloy B2 Furnace Tube
Alloy B2 Drawn over mandrel (DOM)
Hastelloy Alloy B2 Finned Tube
Alloy B2 seamless coil tubing
Hastelloy B2 seamless straight tubing
Alloy B2 Hot finished seamless tubing (HFS)
Alloy B2 Cold drawn seamless tubing (CDS)
Hastelloy B2 Tube for Precision Components
Hastelloy B2 Sighting Tube
Seamless Alloy B2 Tubing
600 Nickel Chromium Tubing
High Quality Alloy B2 Seamless Tube
Hastelloy B2 Square Tube
ASME SB622 Hastelloy B3 Cold Drawn Tube
UNS N10665 ERW Tube
Hastelloy B2 Round Tube
Alloy B2 Rectangular Tube
Hastelloy B3 Alloy thermocouple Tube
ASME SB626 Hastelloy B3 Polish Tube
Alloy B2 Hexagonal Tube
Alloy B2 Hollow Tube
Alloy B2 Chemical Process Tube
Alloy B2 Welded coiled tubing
ASME SB626 Hastelloy B3 Round Tube
Alloy B2 Triangle Tube
Hastelloy B2 Colour Coated Tube
Hastelloy B2 Welded Tube
ASTM B626 Hastelloy B3 Capillary Tube
Hastelloy B2 EFW Tube
UNS N10665 U Shaped Tube
B2 Alloy exhaust tubing
Alloy B2 Secondary & Surplus Tube
WERKSTOFF NR. 2.4617 Outside Polished Tube
WERKSTOFF Nr 2.4617 seam-welded tubing
UNS N10665 cold-drawn coiled tubing
Hastelloy B3 Alloy Welded Tube
Hastelloy Alloy B2 redrawn tubing
Hastelloy Alloy B2 Boiler Tube
ASME SB622 Hastelloy B3 Cold Drawn Tube
Hastelloy B2 Condensers Tube
WERKSTOFF NR. 2.4617 Super Heaters
Hastelloy Alloy B2 Aerospace Tubes
Hastelloy B3 Alloy Oil and gas Tubes
Hastelloy B2 Umbilicals
Alloy B2 Polish Tubes
WERKSTOFF NR. 2.4617 Hydraulic Tubes
B2 Alloy High pressure Tubes
Alloy B2 Nuclear Fuel Tubes
ASTM B626 Weld Tubes
Hastelloy B3 Alloy SCH 40 Tubes
Hastelloy B2 SCH 80 Tubes
Hastelloy Alloy B2 elliptical and Oval Tubes
Alloy B2 Rectangular Tubes
Alloy B2 Seamless Hollow Tubes
Hastelloy B2 Electropolished Tubes
Hastelloy B2 Instrumentation Tubes
WERKSTOFF NR. 2.4617 Electropolished Tubes
Alloy B2 SCH 40 Tubes
Alloy B2 SCH 80 Tubes
Alloy B2 Condenser Tubes
ASTM B626 Hastelloy B3 Oil & Gas Tubing
Alloy B2 Tubing
Alloy B2 Oil Tubes

 

 

Alloy B2 tubing applications
  • Chemical processes
  • Mechanical components in reducing environments
  • Vacuum furnaces

 

 

Our Products

Hastelloy B2 Tube American/ British Standards

  ASTM B622
  ASME SB-622
  ASTM B626
  UNS N10665
  WERKSTOFF Nr 2.4617
  ASME SB-626
  UNS N10675
  WERKSTOFF Nr 2.4600

© Copyright Jignesh Steel 2021. All Rights Reserved. Design and SEO by Mesotek