Sanitary Non Return Valve

 

Manufacturer of Stainless Steel Hygienic Non Return Valve in 1/2" to 6 Inch

Sanitary Non Return Valve
Sanitary Non Return Valve
LKC-2 Non-Return Valve
LKC-2 Non-Return Valve
Stainless Steel Non Return Valve
Stainless Steel Non Return Valve

 

Diaphragm Non Return Valve manufacturer and supplier in Mumbai, Buy various end connections such as Weld, Ferrule, RJT, DIN, SMS, and IDF at best price in India

 

Horizontal sanitary non-return valves are entirely drainable in vertical and horizontal installations, have ASME BPE standard 3A end connections, a material traceability certificate for components and elastomers used in check valves (FDA approved), and have external SS304 clamps with cracking pressures ranging from 10 to 20 mbar (on request). Sanitary Non Return Valve in-line spring-assisted NRV is intended to avoid flow reversal under strict clean conditions. If the pressure below the plug exceeds the pressure above the plug due to the spring, the valve opens, and the higher counter pressure pushes the plunger valve into the seat, closing the valve.

LKC-2 non-return valves are specifically developed for use in stainless steel pipe systems to block fluid reversal movement. These regular non-return valves are stable and highly efficient, and are widely used in numerous processes in the sanitary industry. These stainless steel non-return valves are made specifically for use in stainless steel pipe installations.

Hygienic Non Return Valves are used in systems where the product would flow in just one direction. The valve, which is made of grade 316 stainless steel, operates when the pressure applied on the sprung disc exceeds the opposite force of the spring. Since the opening pressures are usually mild, this valve is suitable for gentle product handling. When a greater counter pressure is applied, the valve will shut, stopping product backflow. The valve comes standard with weld ends, however customer-defined connections may be specified. The valve's internals are finished to 0.4 micron, providing a strong level of cleanliness.

Diaphragm Non Return Valves are widely employed in a variety of industrial applications to maintain a regulated flow rate of fluids. But apart from that, these may be bought in a variety of personalised configurations. They are flexible in design and can be customised to suit any particular need. These valves are suitable for sterile and ultra-hygienic applications.

 

Table Of Content


Sanitary Non Return Valve Price list
Dairy Non Return Valve Dairy Non Return Valve Price
RF SS304 /SS316L Sanitary Stainless Steel Non Return Flange Check Valve US $ 20.00-US $ 235.00 / Piece
Sanitary Stainless Steel Tri clamp non return you pornd check valve US $ 21.60-US $ 56.90 / Piece
Sanitary Stainless Steel Non Return Valve,non return valve US $ 5.00-US $ 30.00 / Piece
Stainless Steel 304 Dairy DIN Clamped Non Return Valve Low Price US $ 17.00-US $ 200.00 / Set
SS304/SS316L Sanitary One Way Check Non Return Valve with heavy duty clamp US $ 20.00-US $ 50.00 / Piece
Stainless steel SS304 SS316L customized low price OEM sanitary non return valve US $ 30.00-US $ 50.00 / Set

 

Buy 304 Stainless Steel LKC-2 non-return valve according to international Standard at lowest possible price


Specification Of Dairy Non Return Valve
Material silicon seats (others available), 304/ 316 stainless steel
Connection Sanitary clamp, PLAIN END, WELD, RJT, FERRULE, DIN, SMS, IDF
Temperature Reting 15°F to 200°F (10°C to 95°C)
Finish Less than 0.6mm (RA) mechanical sanitary polish
Pressure Low pressure drops
End Connection

Weld, RJT, Ferrule, Din, SMS, IDF

Configuration

Ferrule X Ferrule, Male X Male, Male X Female, Female X Female, Weld

Sizes 0.50″, 0.75″, 1.0″, 1.5″, 2.0″, 2.5″, 3.0″ and 4.0″

 

 

Mass kg (lb)

Min. Temp.
°C (°F)

Max. Temp.
°C (°F)

Min. Crack Pressure psi (bar) *

Max. Operating
Pressure psi (bar) **

0.46 (1)

-50 (-58)

120 (248)

0.4 (0.03)

1000 (69)

0.7 (1.5)

-50 (-58)

120 (248)

0.4 (0.03)

1000 (69)

1.1 (2.4)

-50 (-58)

120 (248)

0.4 (0.03)

1000 (69)

1.4 (3)

-50 (-58)

120 (248)

0.4 (0.03)

1000 (69)

1.9 (4.2)

-50 (-58)

120 (248)

0.4 (0.03)

1000 (69)

 

Stainless Steel Non Return Valve Dimensions

Stainless Steel Non Return Valve Dimensions

 

SIZE A B C D E
1″ 87.4 50.5 62 25.4 22.2
1-1/2″ 94 50.5 68.6 38.1 34.8
2″ 95.5 64 70.1 50.8 47.5
2-1/2″ 100.1 77.5 74.6 63.5 60.2
3″ 106.4 91 81 76.2 72.9
4″ 132.8 119 101 101.6 97.4

 

Held wide stock of 316 Stainless Steel Dairy Non Return Valve, view online size chart and dimensions

 

Most Basic types of Hygienic Non Return Valve
LKC-2 non return valve
LKC-2 non return valve
LKC Ultrapure non return valve
LKC Ultrapure non return valve
Pharmaball Non Return Valve
Pharmaball Non Return Valve
Non Return Valves Outphased - LKC
Non Return Valves Outphased - LKC
Non Return Valves Outphased - LKC-1
Non Return Valves Outphased - LKC-1
Stainless Steel Non Return Valve
Stainless Steel Non Return Valve
Diaphragm Non Return Valve
Diaphragm Non Return Valve

 

size chart of Sanitary Non Return Valve

size chart of Sanitary Non Return Valve


SIZE   A B C
Inch mm mm mm mm mm
1/2” 12.7 9.4 12.7 34 23
3/4” 19.05 15.8 19.05 34 23
1” 25.4 22.2 25.4 34 48
1.5” 38.1 34.9 38.1 36 48
2” 50.8 47.6 50.8 36 48
2.5” 63.5 60.3 63.5 36 48
3” 76.2 73 76.2 36 48
4” 101.6 97.6 101.6 47 54

 

LKC-2/LKC-H Non-return Valve Dimensions chart

LKC-2/LKC-H Non-return Valve Dimensions chart

Vertical mounted Dimensions

 

Size

 

 

25
mm

 

38
mm

 

51
mm

ISO

 

63.5
mm

 

76.1
mm

 

101.6
mm

 

DN 25

 

DN 32

 

DN 40

DIN DN
50

 

DN 65

 

DN 80

 

DN 100

A

 

62.5

75.0

87.5

 

95.0

115

155

62.5

75.0

75.0

87.5

95.0

115

155

OD

 

25.4

38.4

51.4

 

63.9

76.4

102

30.0

36.0

42.0

54.0

70.0

85.0

104

ID

 

22.5

35.5

48.5

 

60.5

72.0

97.6

26.0

32.0

38.0

50.0

66.0

81.0

100

t

 

1.45

1.45

1.45

 

1.7

2.2

2.2

2

2

2

2

2

2

2

H

 

72.0

85.5

99

 

127

138

164

72.0

85.5

85.5

99

127

138

164

Weight

(kg)

0.5

0.7

1.0

 

1.7

2.4

4.3

0.5

0.7

0.7

1.0

1.7

2.4

4.3

 

Horizontal mounted Dimensions

 

ISO

 

Size

25
mm

38
mm

51
mm

63.5
mm

76.1
mm

A

95.5

86.4

104.1

119.4

139.7

OD

25.4

38.4

51.4

63.9

76.4

ID

22.5

35.5

48.5

60.5

72.0

t

1.45

1.45

1.45

1.7

2.2

H

72.0

85.5

99.0

127.0

138.0

Weight (kg)

0.5

0.7

1.0

1.7

2.4


Application Of Non Return Valve Pneumatic
  • Heating
  • Water Supply Systems
  • Structural Pipe
  • Oil and Gas Pipeline
  • Paper & Pulp Industry
  • Power Plant
  • Plumbing
  • Food Processing Industry
  • Chemical Industry
  • General Purpose Applications
  • Fabrication Industry

 

Our These products goes on regular basis in USA, Europe, Far East Asia and South Africa
Belgium, Indonesia, Dammam -KSA, Philippines Stainless Steel Sanitary Tri Clamped Check Valve&Non Return Valve
Malaysia, Germany, Czechia, Thailand Stainless Steel DIN Sanitary Non Return Valve Fitting Check Valve
Thailand, France, Qatar, Europe Sanitary Stainless Steel Manual Valve/Check Valve/Non-Return Check Valve/Spring Check Valve
Brazil, Saudi Arabia (KSA), South Africa, Kuwait Middle Flange Connection Stainless Steel Non-Return Check Sanitary Valve
Finland, USA, Malaysia, Bangladesh Sanitary Stainless Steel Clamped Non-Return Valve Check Valve
Nigeria, Australia, Philippines, UK Stainless Steel Sanitary Welding Non Return Valve for Food Industry
Singapore, South Africa, Bahrain Stainless Steel Sanitary Food Grade Manual Non-Return Clamp Ball Valve (HW-BV 4004)
Singapore, Italy, Chile, Iran 3A Sanitary Tri Clamped Non-Return Valve Over Flow Control
UAE, Malaysia, Oman, Hong Kong Sanitary Stainless Steel Three PCS Non-Return Check Valve
Dubai, Malaysia, Netherlands, Russia Stainless Steel Sanitary Non Return Clamped Check Valve
Malaysia, Turkey, United Arab Emirates (UAE), Norway Sanitary Stainless Steel Flange Non Return Check Valve
UAE, Europe, United Kingdom -UK, Malaysia Stainless Steel Sanitary Y Type Manual Male Thread End Angle Non Return Valve
Malaysia, South Korea, Singapore, NY 12203 (USA) Sanitary Non Return Valve with Tri-Clamp Ends (100306)

 

Temperature & Pressure of Hygienic Non Return Valve

Working Pressure

Working Pressure (Water at 20°C) -0.9-10 Bar
(-13—150 Psi)
Working Temperatures (Dependant on Seals) EPDM ( Standard) Silicone Viton
-5°C—135°C -50°C—210°C -10°C—210°C

 

Minimum Opening Pressures

Size 1/2” 3/4” 1.0” 1 1/2” 2.0” 2 1/2" 3.0” 4.0”
Pressure (PSI) 0.5 0.5 3 1.6 0.6 1.3 0.8 0.9

 

Materials of Construction LKC-2 non-return valve

Materials of Construction

Item

Description

Material

1

Body

316 Stainless Steel

2

Liner

316 Stainless Steel

3

Nut

304 Stainless Steel

4

Poppet

316 Stainless Steel

5

Retainer

316 Stainless Steel

6

Spring

302 Stainless Steel

7

Seals & O-Rings

EPDM

 

Clamp Non Retention ball valves
Clamp Non Retention ball valves

Clamp Non Retention Ball Valves

  • Valves combination clamp connection
  • Connection : Clamp, weld, DIN、SMS、ISO、IDF、 thread, BPE、RJT
  • Small operating torque
  • Surface:Ra≤0.5μm
  • Temperature:-30° – 150°
  • Material:304/1.4301,316L/1.4404
  • No matter what the association mode is, the valve body can be supplanted without changing the length of valves
  • Gaskets:FDA 177.2600
  • Without professional tools that disassembling the valves
  • Pressure:10bar
  • Size:1/2″-3″,DN10-DN80


Dairy Non Return Valve
Dairy Non Return Valve

Dairy Non Return Valve

    Features
  • Dimensional accuracy
  • High durability.
  • Non-return Valve are suitable for handling gases & liquids under pressure/ vacuum. These Valve permit fluid stream in only one direction and prevent its movement within the opposite direction
  • Weather resistant
  • Sturdy construction

 

Dairy Non Return Valve

Dairy Non Return Valve

SS 304 Non Return Valve

SS 304 Non Return Valve

SS 316 Non Return Valve

SS 316 Non Return Valve

 

Available Types Of SS 304 Non Return Valve
Dairy Non Return Valve Non Return Valve Plain End
Stainless Steel Non Return valve Non Return Valve
40mm Non Return Valve 22mm Non Return Valve
Non Return Valve 1 Inch Non Return Valve Pvc
Spring Loaded Non Return valve Plastic Non Return valve
Non Return Isolating Valve Non Return Check Valve
Non Return Ball valve Non Return Water valve
Non Return Globe valve Non Return Valve Tc End

 

Diaphragm Non Return Valve Special Features
  • Spring activated plunger
  • Easy to assemble/disassemble
  • Unique Hygienic Design

 

Sanitary Non Return Valve General Characteristics
  • Standards: BS, 3A, IDF, SMS, DIN, 3A CLAMP.
  • Material: 316 Body, Piston & Spring. Disc forged 316L. Flange forged 316L.
  • Size Range: 1/2″ OD – 6″ OD, 25mm – 104mm, DN 25 – DN 100.
  • Spare seal kits: Available ex-stock in EPDM and Viton Material.
  • Pressure Rating: Max Pressure – 150psi / 10bar.
  • Valve Ends: Weld/Weld, Male/Male, Male/Female, Clamp/Ferrule.
  • Seal Material: Food Grade EPDM body & piston seal.


We can supply EN 1.4404 316L Sanitary Union Type Male/threaded Non Return Valve with customized sizes