Bright Drawn Round and Square Bar manufacturer in India, view Cold Drawing Steel Price list
Cold Drawn Steel Bar
Cold Drawn Round Bar
Cold Drawn Square Bar
Find Cold Drawn Bar at our stockyard available in 0.5m - 6m Lengths
Steel Bright Bar or Cold Drawn Steel Bar are steel bars formed by cold drawing hot rolled steel bars using dies. A bright steel bar is a carbon or alloy steel bar with a gleaming bright surface that has been enhanced by cold drawing, peeling, spinning, grinding, and polishing over hot rolled black surface bars. Cold drawing increases the yield power and tensile strength of steel bars. The surface imperfections can be extracted by peeling and flipping. Grinding increases the accuracy of the diameter resistance. The floor would look even more gleaming after polishing. These cold drawn bright bars have many benefits, including: improved size and section, which provides tighter tolerances and reduces machining losses, improved steel surface finish, which reduces surface machining and improves quality, improved straightness, which facilitates automatic bar feeding in CNC, increased mechanical properties, which can reduce the need for hardening, improved machinability and p
Cold drawn bars are normally drawn at room temperature, so they are known as a cold working procedure. It also has an impact on the mechanical properties of the metal. Cold drawn flat bars are cold drawn by aiming, coating, cold painting, multi-pass drawing, and annealing. Cool drawn round bars are manufactured by cold drawing hot rolled steel round bars or hot rolled steel wire rods.
Table Of Content
Cold drawn square bars are a substance that has been cold dried (by deformation resulting from passing the bar through a die). This method allows for the desired scaling of the bar while maintaining close dimensional tolerances. Furthermore, the resultant surface finishing is vibrant and free of scale. Mechanical properties are improved after drawing operations are completed, based on the reduction applied.
| Description | Price list of Cold Drawn Steel Bar in India |
|---|---|
| SAE4140 Scm440 Cold Drawn Steel Round Bar | US $ 800-1100 / Ton |
| JIS S45c / C45 / SAE 1045 Cold Drawn Square Steel Bar / CD Square Bar | US $ 700-1000 / Ton |
| Cold Drawn Steel Bar Carbon Steel Bar | US $ 560-700 / Ton |
| 40crmo 45# Cold Drawn Steel Rod Hex Flat Square Round Steel Bar | US $ 699-799 / Ton |
| S45c/C45/1045 Cold Drawn Steel Bar for Hydraulic Piston Rod | US $ 780-1350 / Ton |
| Cold Drawn AISI 304 Stainless Steel Bright Round Bar | US $ 1500 / Ton |
| En, DIN, JIS, ASTM, BS, Cold Drawn Round Square / Flat / Hexagon / Stainless Steel Bar | US $ 1200-1800 / Ton |
| AISI 304 Cold Drawn Stainless Steel Section Bar | US $ 3 / kg |
| Ss330, Ss400, Ss490 Cold Drawn Low Carbon Alloy Steel Square Bar | US $ 780-1350 / Ton |
If it's not too much trouble, note This is an estimated Cost of Drawn Steel Bar in India. Kindly don't hesitate to get in touch with us for Free Quote and most recent Cold Drawn Steel Bar price list in India. Additionally contrast our Price and other Cold Drawn Steel Bar supplier in India & China.
| size | Diameter: 3-~800mm |
|---|---|
| ASTM specifications | ASTM A 29, ASTM A 108 |
| Hexagons | .250” through 4” |
| Squares | .500” through 3.0625” |
| Rounds | .250” through 6” |
| Finish | Cold Drawn and Belt Polished Condition |
| Length | 2 metres to 6 metres |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
Shape |
ROUND/SQUARE/HEX |
| Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Bright Bars, Rod |
| Processing | Bar cutting to 650mm |
| Ultrasonic Test | 100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 (class 1 to 4), API 6A/ISO 10423:2003-PSL 3, SEP 1920:1984 (class A, B, C), MIL STD 2154 |
| Chamfering | Available in 30° to 60° through fully automatic both-end chamfering machine |
| Straightness | Up to 0.25 mm/metre TIR (0.0015 inch/feet) |
Brand |
VSP/JSW/MUKUND/BHUSHAN |
| Crack Test | Magnetic Particle Inspection (MPI) |
| Heat Treatment | Solution Annealed, Annealed, Double Ageing/Double Tempering, Quenched & Tempered (QT) |
| Length Tolerance | Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
| dealers & distributors are located in | Gimhae-si, Abu Dhabi, Pimpri-Chinchwad, New Delhi, Port-of-Spain, Ahvaz, Chennai, Calgary, Baroda, Sydney, Riyadh, Courbevoie, Janeiro, Bangalore, Montreal, Istanbul, Howrah, Noida, Surat, Rajkot, Ahmedabad, Perth, India, Karachi, Ludhiana, Vadodara, Ankara, Melbourne, Mexico Thiruvananthapuram, Tau, Kuwait, Bengaluru, Jamshedpur, London, Ernakulam, Hyderabad, Mumbai, Dammam, Gujarat, Coimbatore, Kolkata, Nagpur,Indore, Khobar, Ranchi, Bogota, Kanpur, Caracas, Gurgaon, Lagos, Santiago, Muscat, Tehran, Manama |
| Our Cold Drawn Steel Bar conforms to NACE MR0175/ISO 15156 | |
Cold Drawn Bar Grades
Jignesh Steel gives a wide assortment of grades in cold drawn bars as little as 12mm. Cold finished bars are generally arranged in the accompanying ASTM details for AISI, SAE, JIS, DIN and other monetarily accessible grades:
- DIN
- SAE
- JIS
- AISI
- Customer specific available on request
| GRADE | SIZE | SHAPES |
|---|---|---|
| 1018 | 5/16"-11” |   |
| 1022 | 1 1/4"-2” |  |
| 1045 | 5/16"-8½” | |
| 1117 | 7/16”-4” | |
| 1141 | 1”-11” | |
| 1144 | 1”-11” | |
| 1144 A-311 | 1”-11” | |
| 12L14 | 5/16”-11” | |
| 1215 | 5/16”-11” | |
| 8620 | 7/16”-11” |  |
| 86L20 | 7/16”-4” | |
| 4340 | 1½”-11” | |
| 41L40 | 1½"-4" | |
| 4140 LPA | 5/6”-6” | |
Cold Drawn Bright Bars Condition
| H&T | Hardened and tempered. |
| ANN | Annealed |
| PH | Precipitation hardened. |
Buy Cold Drawn Flat/Bright Steel Bars at factory price, Check Cold Drawn Steel Bar Tolerances
Cold Drawing Steel Benfits
| Straightness | The straightness is more precise than hot rolled steel. |
| Size & Roundness | Cold rolled steel has tighter size and roundness tolerances. |
| Mechanical Properties | The need for heat treatments are often eliminated due to the increased yields and tensile strength of cold finished steel. |
| Surface Finish | Cold finished steel is smooth and can be used for a variety of applications. |
| Machinability | When using lower carbon grades, the machinability is improved, which leads to a better tool life. |
| Cold Drawn Steel Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
| 3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
| 1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
| 5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
| 4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
| 3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
| 5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
| 7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
| 6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
| 1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
| 7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
| 5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
| 8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
| 9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
| 3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
| 10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
| 11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
| 7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
| 12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
| 1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
| 13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
| 14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
| 9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
| 15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
| 5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
| 16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
| 17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
| 11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
| 18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
| 3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
| 2-1/2" | 7.576 | 24.856 | ||||||
| 2-5/8" | 8.354 | 27.409 | ||||||
| 2-3/4" | 9.169 | 30.083 | ||||||
The sizes of Cold Drawn Steel Bars can also be selected when using the THD model.
| Cold Drawn Steel Bar Size & Dimensions of Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|
| Metric | US Bar | ASTM/ Canadian | Japanese | ||||
| Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
| 5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
| 5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
| 6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
| 7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
| 8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
| 9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
| 10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
| 11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
| 12 | 12 | #10 | 1.250 | 32 | 32 | ||
| 14 | 14 | #11 | 1.375 | 35 | 35 | ||
| 16 | 16 | #12 | 1.500 | 38 | 38 | ||
| 18 | 18 | #13 | 1.625 | 41 | 41 | ||
| 20 | 20 | #14 | 1.750 | 44 | 44 | ||
| 22 | 22 | #15 | 1.875 | 48 | 48 | ||
| 25 | 25 | #16 | 2.000 | 51 | 51 | ||
| 28 | 28 | #18 | 2.250 | 57 | 57 | ||
| 32 | 32 | ||||||
| 36 | 36 | ||||||
| 40 | 40 | ||||||
| 44 | 44 | ||||||
| 50 | 50 | ||||||
Prestige quality Cold Drawn Steel Bar suppliers offer variety of shapes such as Bright Bars, Square Bar, Hexagonal Bar, Flat Bar, Channels & Hollow Bar.
| CD | Cold drawn | P | Polished |
| BD | Bright drawn | SRE | Slit rolled edge |
| CG | Centreless ground | HF | Hot finished |
| CF | Cold finished | HRAP | Hot rolled annealed and pickled |
| P&T | Peeled and turned | RT | Rough turned/peeled |
| ST | Smooth turned | PR | Peeled and reeled |
Cold Drawn Bright Bars Tolerance & Steel Hexagon, Flat Tolerance (BS 970-3)
| Tolerances for Cold Drawn Square Bar | ||
|---|---|---|
| Shape / Section | Size, diameter or width across flats | Permitted variation |
| mm | mm | |
| Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
| Flat (thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
| Flat (width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
| Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
Tolerances of Turned Cold Drawn Round Bar (BS 970-3)
| Turned Cold Drawn Steel Bar Tolerances | |
|---|---|
| Cold Drawn Steel Bar Size, diameter | Permitted variation |
| mm | mm |
| ≧ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 120 > 120 ≦ 180 > 180 ≦ 250 > 250 ≦ 315 > 315 ≦ 400 > 400 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 + 0 to - 0.160 + 0 to - 0.185 + 0 to - 0.210 + 0 to - 0.230 + 0 to - 0.250 |
Tolerances of Precision Bright Drawn Bar (BS 970-3)
| Precision Bright Drawn Bar Tolerances | ||||
|---|---|---|---|---|
| Section | Size, diameter |
Permitted overall variation | ||
| Class A | Class B | Class C | ||
| mm | mm | mm | mm | |
| Round | ≧ 6 <75 | 0.05 | 0.025 | 0.013 |
Tolerance of Cold Drawn Bright Bar (BS EN ISO 286-2 )
| Cold Drawn Steel Bar Tolerance ISO “H” Series in MM | ||||||||
|---|---|---|---|---|---|---|---|---|
| NOMINAL SIZE | h5 | h6 | h7 | h8 | h9 | H10 | H11 | h12 |
| DIAMETER mm | ||||||||
| ~ to 3 | +0.004/0 | +0.006/0 | +0.01/0 | +0.014/0 | +0.025/0 | +0.04/0 | +0.06/0 | +0.1/0 |
| over 3 to 6 | +0.005/0 | +0.008/0 | +0.012/0 | +0.018/0 | +0.03/0 | +0.048/0 | +0.075/0 | +0.12/0 |
| over 6 to 10 | +0.006/0 | +0.009/0 | +0.015/0 | +0.022/0 | +0.036/0 | +0.058/0 | +0.09/0 | +0.15/0 |
| over 10 to 18 | +0.008/0 | +0.011/0 | +0.018/0 | +0.027/0 | +0.043/0 | +0.07/0 | +0.11/0 | +0.18/0 |
| over 18 to 30 | +0.009/0 | +0.013/0 | +0.021/0 | +0.033/0 | +0.052/0 | +0.084/0 | +0.13/0 | +0.21/0 |
| over 30 to 50 | +0.011/0 | +0.016/0 | +0.025/0 | +0.039/0 | +0.062/0 | +0.1/0 | +0.16/0 | +0.25/0 |
| over 50 to 80 | +0.013/0 | +0.019/0 | +0.03/0 | +0.046/0 | +0.074/0 | +0.12/0 | +0.19/0 | +0.3/0 |
| over 80 to 120 | +0.015/0 | +0.022/0 | +0.035/0 | +0.054/0 | +0.087/0 | +0.14/0 | +0.22/0 | +0.35/0 |
| over 120 to 180 | +0.018/0 | +0.025/0 | +0.04/0 | +0.063/0 | +0.1/0 | +0.16/0 | +0.25/0 | +0.4/0 |
| over 180 to 250 | +0.02/0 | +0.029/0 | +0.046/0 | +0.072/0 | +0.115/0 | +0.185/0 | +0.29/0 | +0.46/0 |
| SHAPE | TYPE | GRADE | SIZE(mm) | LENGTH(mm) |
| Round | COIL TO BAR | SS400, S45C | 6~25 | 4000~6000 |
| BAR TO BAR | SS400, S45C | 28~100 | 5800~6700 |
| Type | AISI (SAE) | Number | Maker | |
| CDM 1B | 6~12 | 2 | MIYAZAKI/JAPAN | |
| CDM 2B | 12~26 | 3 | MIYAZAKI/JAPAN | |
| DRAW BENCH | 25~80 | 1 | domestic manufacturer | |
| 40~100 | 1 | domestic manufacturer | ||
| POLISHING | 6~12 | 2 | MIYAZAKI/JAPAN | |
| 2-ROLL STRAIGHTENER MACHINE | 6~12 | 1 | E.J.P/GERMANY | |
| 10~26 | 3 | E.J.P/GERMANY | ||
| 25~50 | 1 | E.J.P/GERMANY | ||
| 9-ROLL STRAIGHTENER MACHINE | 30~100 | 1 | KIESERLING/GERMANY | |
| Double-edge saw | 30~100 | 1 | KIESERLING/GERMANY | |
| 20~100 | 1 | WRENCH SET |
Chemical Composition of Standard "1022 Grade"
| Carbon | 0.17-0.23 |
| Manganese | 0.70-1.00 |
| Phosphorus (max) | 0.040 |
| Sulfur (max) | 0.050 |
for "Grade 1022" Mechanical Property Ranges
| Tensile strength (psi) | 82,000 - 92,000 |
| Yield strength (psi) | 72,000 - 82,000 |
| Elongation in 2" (%) | 13 - 20 |
| Reduction of area (%) | 45 - 55 |
| Brinell Hardness (BHN) | 160 - 190 |
Find your choice of sizes from our Cold Drawn Stainless Steel Bar stock
|
|
| COIL TO BAR | BAR TO BAR |
WIRE ROD (COIL) |
ROUND BAR (black round bar) |
| Preliminary braces |
SHOT BLAST |
| SHOT BLAST |
DRAW BENCH |
| COIL DRAWING MACHINE |
CUTTING |
| 2-ROLL STRAIGHTENING |
2-ROLL STRAIGHTENING |
| INSPECTION |
INSPECTION |
| PACKING |
PACKING |
| CD-BAR | DB-BAR |
| HS Code | Description |
|---|---|
| 72285090 | COLD DRAWN STEEL ROUND BAR (9.30 MM X 3000 MM)(FOR STEERING )(CAPTIVE USE) |
| 72285090 | COLD DRAWN STEEL ROUND BAR (9.30 MM X 3000 MM)(FOR STEERING )(CAPTIVE USE) |
| 72287021 | COLD DRAWN ALLOY STEEL PROFILE (EXTRUDED BAR) LENGTH 3500 MM 100CR6 UNI 3097-75 |
| 72285010 | PRIME ALLOY STEEL BARS (COLD DRAWN/ COLD FINISHED) GRADE-SCM440HX,SUJ2(SIZE AS PER INVOICE) |
| 72285010 | PRIME ALLOY STEEL BARS (COLD DRAWN/ COLD FINISHED) GRADE-SUJ2(SIZE IN MM-15.14X3002) |
| 72287021 | COLD DRAWN ALLOY STEEL PROFILE (EXTRUDED BAR) LENGTH 3500 MM 100CR6 UNI 3097-75 |
| 72155090 | PRIME NON ALLOY STEEL BARS (COLD DRAWN/COLD FINISHED) GRADE-1018,CH45KS,S45CS(SIZE AS PER INVOICE) |
| 72285090 | COLD DRAWN ALLOY SPRING STEEL ROUND BAR ACROS1950(SIZE:15.0MM X L 2955MM)(GOODS FOR CAPTIVE CONSUMPTION)(450 PCS) |
| 72222019 | COLD DRAWN STAINLESS STEEL BARS (DETAILS AS PER INVOICE NO 2016/04160. DT. 30.09.2016) |
| 72151000 | COLD DRAWN STEEL BAR (124EH09BU S48C) (14.4MM X 2,870MM) (FOR MANUFACTURING OF AUTOMOTIVE PARTS) (CAPTIVE CONSUMPTION) |
| 72285090 | COLD DRAWN STEEL ROUND BAR B4KYA0000700 SCM420-ANNEALED /23.5MM X 5.500MM |
| 72222019 | COLD DRAWN STAINLESS STEEL BARS (DETAILS AS PER INVOICE NO 2016/00927. DT. 20.09.2016) |
Weight Calculation Formula To calculate the weight of Drawn Steel Bar:
- ROUND – dia.mm2 x 0.004143 = Weight in lbs. per foot
- ROUND – dia.mm2 x 0.006165 = Weight in kilograms per metre
- HEXAGON – size mm2 x 0.00457 = Weight in lbs. per foot
- HEXAGON – size mm2 x 0.006798 = Weight in kilograms per metre
- SQUARE – Size mm2 x 0.00527 = Weight in lbs. per foot
- SQUARE – Size mm2 x 0.000785 = Weight in kilograms per metre
- U.K. tons per sq. inch (tons f/in2) x 15.4443 = Mega Pascals (MPa)
- Newton per sq. milimeter (N/mm2) x 0.064749 = U.K. tons per sq. inch
- Metres to feet x 3.2809
- Feet to metres x 0.3048
- Mega Pascals (MPa) x 0.64749 = U.K. tons f per square inch
Jignesh Steel is prominent supplier in South and North America, Europe and West Africa
| Dammam -KSA, Philippines, Indonesia, Belgium | SAE 1045 C45 S45c Carbon Steel Cold Drawn Hex / Round / Flat Steel Bar |
| Czechia, Thailand, Germany, Malaysia | Cold Drawn AISI 30 mm 304 309 310 316 Stainless Steel Bar |
| Qatar, Europe, France, Thailand | A36 Ss400 S20c S45c Cold Drawn Steel Round Bar |
| Malaysia, Bangladesh, USA, Finland | Square Bar Ss400 Cold Drawn Steel Bar |
| Bahrain, Singapore, South Africa | D2 SKD11 Steel Round Bar Cold Drawn |
| Oman, Hong Kong, Malaysia, UAE | Cold-Drawn Polished Stainless Steel Square Bar |
| South Africa, Kuwait, Saudi Arabia (KSA), Brazil | Cold Drawn Steel Irregular Shape Steel Bar for Forklift Attachments |
| Chile, Iran, Italy, Singapore | Hot Rolled Cold Drawn 304 Stainless Steel Bar for Chemical Industry |
| Philippines, UK, Australia, Nigeria | H9 Cold Drawn Bright Steel Round Bars for Conveyor Roller |
| United Arab Emirates (UAE), Norway, Turkey, Malaysia | Custom Carbon Steel Cold Drawn Flat Bar |
| Egypt, Mexico, Spain, UK | Free Cutting Steel Bar 1215 Cold Drawn Polished Round Bar |
| Netherlands, Russia, Malaysia, Dubai | St37, A36, S235jr, 1.2080, 12L14 Cold Drawn Steel Bar |
| UK, Poland, Canada, Ellington -United States | Cold Drawn Uns S32550 Stainless Steel Bar |
| United Kingdom -UK, Malaysia, Europe, UAE | ASTM A108 Diameter 18-60mm Cold Drawn Steel Bar |
| Europe, Romania, Japan, Malaysia | Ss41 1010 High Quality Cold Drawn Carbon Steel Round Bar |
- Roller conveyor axles
- Hand tools
- Fasteners
- Precision machined parts
- Vehicle axles
- Concrete accessories.
- Stabilizer bars
- Bearings
- Wheel spindles
| Type | Grade 8(H8) | Grade 9(H9) | Grade 10(H10) | Grade 11(H11) |
| ~3 and below | 0, -0.014 | 0, -0.025 | 0, -0.040 | 0, -0.060 |
| 3 through 6 | 0, -0.018 | 0, -0.030 | 0, -0.048 | 0, -0.075 |
| 6 through 10 | 0, -0.022 | 0, -0.036 | 0, -0.058 | 0, -0.090 |
| 10 through 18 | 0, -0.027 | 0, -0.042 | 0, -0.070 | 0, -0.110 |
| 18 through 30 | 0, -0.033 | 0, -0.052 | 0, -0.084 | 0, -0.130 |
| 30 through 50 | 0, -0.039 | 0, -0.062 | 0, -0.100 | 0, -0.160 |
| 50 through 80 | 0, -0.046 | 0, -0.074 | 0, -0.120 | 0, -0.190 |
| 80 through 120 | 0, -0.054 | 0, -0.087 | 0, -0.140 | 0, -0.220 |
Annealed and age hardened Drawn Steel Bar exporter from India, view Cold Drawn Steel Bar Process/Properties