Certified Inconel 718 Studs and Hex Bolt Supplier in India offering a range of sizes at the lowest possible cost
The ASTM B637 UNS N07718 Bolts are manufactured by all renowned bolt manufacturers in India. The Inconel 718 Hex Bolt material has a high concentration of chromium and nickel in its chemical composition. The Inconel 718 Forged Rings also have added molybdenum which enhances their corrosion resistance capabilities.
The Inconel 718 Fasteners are devices which help to connect one equipment with the other. The Inconel 718 Nuts are basically produced with age-hardened alloy and they resist the formation of grain boundary or carburization. The Inconel 718 Stud Bolts show good performance in various stress-induced environments. The Inconel 718 Forging has superior hardenability and comes with excellent mechanical properties. They are quite reliable and can be installed quite easily. The Alloy 718 Studs ensure that the equipment is strongly sealed, and offers added protection to the apparatus.
The Inconel 718 Threaded Rod is widely used in the aerospace industry, cryogenic systems, natural gas refining, and many more. The Inconel 718 Nuts Bolts should be made using good quality raw material and latest technologies so that it can give optimal performance. The ASTM B637 Bolts should also be made following all the national and international standards.
The Asme Sb637 Stud Bolt is one of the best devices for fastening heavy equipment. They possess high strength and the Inconel 718 Threaded Bar also possesses good tolerance. The standard size of the Inconel 718 U Bolt ranges between 3 mm to 200 mm.
The Alloy 718 Washers show optimal performance upto the temperature of 70 degrees C. They have good thermal conductivity in different types of systems. The Alloy 718 Screws can be galvanized or annealed to improve their corrosion resistance properties. The ASTM B637 Forgings can be customized in terms of their shapes, sizes, and dimensions according to the requirements specified by the clients. The Inconel 718 Forged Rings should be made with dimensional accuracy so that they can give their best performance in any given condition.
| ASTM / ANSI | ASME SB637 / ASTM B637 |
|---|---|
| Material | Astm B637 Uns N07718 |
| Grades | Alloy 718 Bolts |
| Threads: | BSW, METRIC, UNF, UNC, BSF,or as required |
| Astm B637 UNS N07718 Bolts Size | M2 - M160 |
| Length | 3 mm to 200 mm |
| other sizes | M20, M2, M12, M2.5, M10, M6, M24, M4, M3, M30, M5, M36, M8, M14, M16 etc. |
| Astm B637 UNS N07718 Bolts Description | Astm B637 UNS N07718 Bolts Price |
| Inconel 718 Fastener | US $ 5-10 / Piece |
| Astm B637 Uns N07718 Full Thread Hex Bolt | US $ 0.01-0.1 / Piece |
| DIN938 Custom CNC Machined Inconel 718 Threaded Rod | US $ 0.109-0.224 / Piece |
| 2.4668 High Quality DIN 934 Hex Nut | US $ 0.01-0.5 / Piece |
| Inconel 718 Hex Head Bolt | US $ 23-30 / Piece |
| Customized CNC Lathe Machining Inconel 718 Aerospace Threaded Studs | US $ 0.6 / Piece |
| Inconel 718 Hex Nut M20 Bolts for Steel Structural | US $ 0.1-0.15 / Piece |
| Precision Alloy 718 Threaded Rod | US $ 0.01-0.5 / Piece |

We have a wide selection of Alloy 718 Fasteners in stock, and we can also provide Uns N07718 Threaded rod to meet your needs.

Astm B637 Uns N07718 Bolts

inconel 718 Hex Bolt

Alloy 718 Studs

Asme Sb637 DIN 2.4668 Threaded Rod

Alloy 718 Screws

Inconel 718 Fasteners

Astm B637 Alloy 718 Nuts

Astm B637 Uns N07718 Washers
Astm B637 Forgings Supplier, Do you need DIN 2.4668 Nuts Bolts in a certain size but are having trouble locating them? We can custom it to your requirements.

| Astm B637 UNS N07718 Threaded Rod Weight per metre | Threaded Rod Thread | Astm B637 UNS N07718 Threaded Rod Strength | |||
|---|---|---|---|---|---|
| Threaded Rod Class 70 | Threaded Rod Class 80 | ||||
| UTS | 0.2% proof | UTS | 0.2% proof | ||
| Kg/m | kN | kN | kN | kN | |
| 3.83 | M27 | 321.3 | 206.6 | 367.2 | 275.4 |
| 1.31 | M16 | 109.9 | 70.7 | 125.6 | 94.2 |
| 2.05 | M20 | 171.5 | 110.3 | 196.0 | 147.0 |
| 0.72 | M12 | 64.0 | 41.0 | 73.0 | 54.0 |
| 2.96 | M24 | 247.1 | 158.9 | 282.4 | 211.8 |
| 14.65 | M52 | 1230.6 | 791.1 | 1406.4 | 1054.8 |
| 6.84 | M36 | 571.9 | 367.7 | 653.6 | 490.2 |
| 4.70 | M30 | 392.7 | 252.6 | 448.8 | 336.6 |
| 8.14 | M39 | 683.2 | 439.2 | 780.8 | 585.6 |
| 5.78 | M33 | 485.8 | 312.3 | 555.2 | 416.4 |
| 9.38 | M42 | 784.7 | 504.5 | 896.6 | 672.6 |
| 10.90 | M45 | 914.2 | 587.7 | 1044.8 | 783.6 |
| 12.32 | M48 | 1031.1 | 662.9 | 1178.4 | 883.8 |
| NOMINAL SIZE (D) | ACRO THE FLATS | HEAD THICKNESS | BODY DIA. | ACRO CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| F (MAX) | F (MIN) | H (MAX) | H (MIN) | D (MAX) | D (MIN) | C (MAX) | C (MIN) | |
| m20 | 30.00 | 29.16 | 12.88 | 12.12 | 20.00 | 19.67 | 34.64 | 32.95 |
| m12 | 19.00 | 17.73 | 7.76 | 4.24 | 12.00 | 11.73 | 20.78 | 20.03 |
| m14 | 22.00 | 20.67 | 9.09 | 8.51 | 14.00 | 13.73 | 24.25 | 23.35 |
| m10 | 17.00 | 15.73 | 6.63 | 6.17 | 10.00 | 9.78 | 18.48 | 17.77 |
| m16 | 24.00 | 23.67 | 10.32 | 9.68 | 16.00 | 15.73 | 27.71 | 26.75 |
| m30 | 46.00 | 45.00 | 19.48 | 17.92 | 30.00 | 29.67 | 53.12 | 50.85 |
| m24 | 36.00 | 35.00 | 15.44 | 14.56 | 24.00 | 23.67 | 41.57 | 39.55 |
| m100 | 145.00 | 140.00 | 63.9 | 60.10 | 90.00 | 99.13 | 167.43 | 159.60 |
| m36 | 55.00 | 53.80 | 23.38 | 21.63 | 36.00 | 35.61 | 63.51 | 60.79 |
| m48 | 75.00 | 72.60 | 31.07 | 28.93 | 48.00 | 47.38 | 86.60 | 82.76 |
| m56 | 85.00 | 82.20 | 36.2 | 33.80 | 56.00 | 55.26 | 98.15 | 93.71 |
| m42 | 65.00 | 62.90 | 26.97 | 25.03 | 42.00 | 41.38 | 75.06 | 71.71 |
| m64 | 95.00 | 91.80 | 41.32 | 38.68 | 64.00 | 63.26 | 109.70 | 104.65 |
| m80 | 115.00 | 111.00 | 51.58 | 48.42 | 80.00 | 79.26 | 132.72 | 126.54 |
| m72 | 105.00 | 101.40 | 46.45 | 43.55 | 72.00 | 71.26 | 121.24 | 115.60 |
| m90 | 130.00 | 125.50 | 57.74 | 54.26 | 90.00 | 89.13 | 150.11 | 143.07 |

| Nominal | Head Dia | Hex Socket Size | Thread. | Body dia. and Head height | Soc. length | ||
| Size | Max | Min | Pitch | Max | Min | ||
| A | J | D /H | K | ||||
| M8 | 13.00 | 12.57 | 6.00 | 1.25 | 8.00 | 7.78 | 4.3 |
| M4 | 7.00 | 6.64 | 3.00 | 0.70 | 4.00 | 3.82 | 2.00 |
| M3 | 5.50 | 5.20 | 2.50 | 0.5 | 3.00 | 2.86 | 1.3 |
| M10 | 16.00 | 15.57 | 8.00 | 1.5 | 10.00 | 9.78 | 5.50 |
| M5 | 8.50 | 8.14 | 4.00 | 0.8 | 5.00 | 4.82 | 2.70 |
| M6 | 10.00 | 9.64 | 5.00 | 1.0 | 6.00 | 5.82 | 3.30 |
| M12 | 18.00 | 17.57 | 10.00 | 1.75 | 12.00 | 11.73 | 6.60 |
| M20 | 30.00 | 29.48 | 17.00 | 2.5 | 20.00 | 19.67 | 10.70 |
| M16 | 24.00 | 23.48 | 14.00 | 2.0 | 16.00 | 15.73 | 8.80 |
| M24 | 36.00 | 35.38 | 19.00 | 3.0 | 24.00 | 23.67 | 12.90 |
Before choosing an Alloy 718 Screw and washer supplier, review our deliveries over the previous two years and check the torque on Astm B637 Uns N07718 Bolts.

| Astm B637 UNS N07718 Stud bolt sizes | Astm B637 UNS N07718 Studs length | ||||||
| Nominal pipe size | No. of Bolts | Bolt Circle dia. | OD of Flange | Bolt Holes dia. | Bolts dia. | Ring Joint | 0.06 in Raised Face |
| 3/4 | 4 | 2 3/4 | 3 7/8 | 5/8 | 1/2 | – | 2 1/2 |
| 1 1/4 | 4 | 3 1/2 | 4 5/8 | 5/8 | 1/2 | 3 1/4 | 2 3/4 |
| 1/2 | 4 | 2 3/8 | 3 1/2 | 5/8 | 1/2 | – | 2 1/4 |
| 1 1/2 | 4 | 3 7/8 | 5 | 5/8 | 1/2 | 3 1/4 | 2 3/4 |
| 2 | 4 | 4 3/4 | 6 | 3/4 | 5/8 | 3 3/4 | 3 1/4 |
| 1 | 4 | 3 1/8 | 4 1/4 | 5/8 | 1/2 | 3 | 2 1/2 |
| 2 1/2 | 4 | 5 1/2 | 7 | 3/4 | 5/8 | 4 | 3 1/2 |
| 3 1/2 | 8 | 7 | 8 1/2 | 3/4 | 5/8 | 4 | 3 1/2 |
| 4 | 8 | 7 1/2 | 9 | 3/4 | 5/8 | 4 | 3 1/2 |
| 3 | 4 | 6 | 7 1/2 | 3/4 | 5/8 | 4 | 3 1/2 |
| 5 | 8 | 8 1/2 | 10 | 7/8 | 3/4 | 4 1/4 | 3 3/4 |
| 8 | 8 | 11 3/4 | 13 1/2 | 7/8 | 3/4 | 4 3/4 | 4 1/4 |
| 6 | 8 | 9 1/2 | 11 | 7/8 | 3/4 | 4 1/2 | 4 |
| 10 | 12 | 14 3/4 | 16 | 1 | 7/8 | 5 | 4 1/2 |
| 14 | 12 | 18 3/4 | 21 | 1 1/8 | 1 | 5 3/4 | 5 1/4 |
| 12 | 12 | 17 | 19 | 1 | 7/8 | 5 1/4 | 4 3/4 |
| 16 | 16 | 21 1/4 | 23 1/2 | 1 1/8 | 1 | 5 3/4 | 5 1/4 |
| 20 | 20 | 25 | 27 1/2 | 1 1/4 | 1 1/8 | 6 3/4 | 6 1/4 |
| 18 | 16 | 22 3/4 | 25 | 1 1/4 | 1 1/8 | 6 1/4 | 5 3/4 |
| 24 | 20 | 29 1/2 | 32 | 1 1/4 | 1 1/4 | 7 1/4 | 6 3/4 |

| Diameter* (mm) |
Astm B637 UNS N07718 Nut Size (mm) |
Height (mm) |
||
|---|---|---|---|---|
| Jam Nut | Astm B637 UNS N07718 Hex Nut | Nylock Nut | ||
| 8 | 5 | 2.7 | 4 | 5 |
| 5 | 2.5 | 1.6 | 2 | - |
| 5.5 | 3 | 1.8 | 2.4 | 4 |
| 30 | 20 | 10 | 16 | 20 |
| 4 | 2 | 1.2 | 1.6 | - |
| 7 | 4 | 2.2 | 3.2 | 5 |
| 19 | 12 | 6 | 10 | 12 |
| 11 | 7 | 3.5 | 5.5 | - |
| 22 | 14 | 7 | 11 | 14 |
| 13 | 8 | 4 | 6.5 | 8 |
| 24 | 16 | 8 | 13 | 16 |
| 10 | 6 | 3.2 | 5 | 6 |
| 17 | 10 | 5 | 8 | 10 |
| 27 | 18 | 9 | 15 | 18.5 |
Here you may find detailed information on Astm B637 bolt specifications, properties, and sizes.

| Bolt Size | USS | SAE | ||||
| ID (in.) | OD (in.) | Thickness | ID (in.) | OD (in.) | Thickness | |
| 5/32 (#8) | - | - | - | 0.188 | 0.438 | .036/.065 |
| 1/8 (#6) | - | - | - | 0.156 | 0.375 | .036/.065 |
| 7/32 (#12) | - | - | - | 0.250 | 0.562 | .051/.080 |
| 3/16 (#10) | 0.250 | 0.560 | .036/.065 | 0.220 | 0.500 | .036/.065 |
| 1/4 (#14) | 0.312 | 0.734 | .051/.080 | 0.281 | 0.625 | .051/.080 |
| 3/8 | 0.438 | 1.000 | .064/.104 | 0.406 | 0.812 | .051/.080 |
| 5/16 | 0.375 | 0.875 | .064/.104 | 0.344 | 0.688 | .051/.080 |
| 7/16 | 0.500 | 1.250 | .064/.104 | 0.469 | 0.922 | .051/.080 |
| 9/16 | 0.625 | 1.469 | .086/.132 | 0.594 | 1.156 | .074/.121 |
| 1/2 | 0.562 | 1.375 | .086/.132 | 0.531 | 1.062 | .074/.121 |
| 5/8 | 0.688 | 1.750 | .108/.160 | 0.656 | 1.312 | .074/.121 |
| 7/8 | 0.938 | 2.250 | .136/.192 | 0.938 | 1.750 | .108/.160 |
| 3/4 | 0.812 | 2.000 | .122/.177 | 0.812 | 1.469 | .108/.160 |
| 1 | 1.062 | 2.500 | .136/.192 | 1.062 | 2.000 | .108/.160 |
| 1 1/4 | 1.375 | 3.000 | .136/.192 | 1.375 | 2.500 | .136/.192 |
| 1 1/8 | 1.250 | 2.750 | .136/.192 | 1.250 | 2.250 | .108/.160 |
| 1 3/8 | 1.500 | 3.250 | .153/.213 | 1.500 | 2.750 | .136/.213 |
| 3 | 3.125 | 5.500 | .249/.327 | - | - | - |
| 1 5/8 | 1.750 | 3.750 | .153/.213 | - | - | - |
| 1 1/2 | 1.625 | 3.500 | .153/.213 | 1.625 | 3.000 | .153/.213 |
| 1 3/4 | 1.875 | 4.000 | .153/.213 | - | - | - |
| 2 | 2.125 | 4.500 | .153/.213 | - | - | - |
| 1 7/8 | 2.000 | 4.250 | .153/.213 | - | - | - |
| 2 1/2 | 2.625 | 5.000 | .210/.280 | - | - | - |
| 2 1/4 | 2.375 | 4.750 | .320/.248 | - | - | - |
| 2 3/4 | 2.875 | 5.250 | .228/.410S | - | - | - |
| Astm B637 UNS N07718 BOLT DIA |
Torque FT-LBS | ||
| 70% Torque |
30% Initial Torque |
100% Final Torque |
|
| 9/16 | 53 | 23 | 75 |
| 1/2 | 36 | 16 | 52 |
| 5/8 | 73 | 31 | 104 |
| 7/8 | 166 | 71 | 237 |
| 3/4 | 129 | 55 | 184 |
| 1 | 249 | 107 | 356 |
| 1.1/4 | 417 | 179 | 596 |
| 1.1/8 | 297 | 127 | 424 |
| 1.3/8 | 435 | 186 | 622 |
| 1.9/16 | 392 | 168 | 560 |
| 3 | 3008 | 1289 | 4297 |
| 1.1/2 | 574 | 246 | 821 |
| 1.5/8 | 445 | 191 | 636 |
| 1.7/8 | 696 | 298 | 994 |
| 1.3/4 | 561 | 240 | 801 |
| 2 | 853 | 366 | 1219 |
| 2.1/2 | 1709 | 733 | 2442 |
| 2.1/4 | 1234 | 529 | 1762 |
| 2.3/4 | 2300 | 986 | 3285 |

Inconel 718 Hex Head Bolt
IOI Group, Malaysia

DIN 2.4668 Hex Bolt
Muntajat, Qatar

Custom CNC Turning Parts Astm B637 UNS N07718 Hex Cap Nut
Oltchim, Romania
| Common Name | Alloy | Related Specification | |||
|---|---|---|---|---|---|
| UNS | European | ASTM | British | ||
| Inconel 718 ® | Alloy 718 | N07718 | 2.4668 | B637 | |
Ni |
C | Al | Cb+Ta | Cr | Mo | Fe | Ti | Cu | Si | Mn | B | |
| MIN | 5.0 | 0.9 | - | 52.0 | 19.0 | 18.0 | 3.0 | - | 0.5 | - | 0.009 | 0.05 |
| MAX | - | - | 0.35 | Balance | - | - | - | 0.35 | - | 0.1 | - | - |
| Ultimate Tensile Strength, ksi | 202 |
| Temperature, °F | 70 |
| 0.2 % Yield Strength, ksi | 170 |